China factories

Chat Now Send Email
China factory - Shenzhen Liush Auto Parts Co.,Ltd

Shenzhen Liush Auto Parts Co.,Ltd

  • China,Shenzhen
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Electric Trunk Lift Kit Aftermarket Tailgate Retrofit Smart Kick Sensor for DFSK
China Electric Trunk Lift Kit Aftermarket Tailgate Retrofit Smart Kick Sensor for DFSK

  1. China Electric Trunk Lift Kit Aftermarket Tailgate Retrofit Smart Kick Sensor for DFSK

Electric Trunk Lift Kit Aftermarket Tailgate Retrofit Smart Kick Sensor for DFSK

  1. MOQ: 1 Set
  2. Price: US$150-230 / Set
  3. Get Latest Price
Packaging Details Single set carton 79x21x19 cm, two sets 82x25x36 cm, foam lined and moisture protected
Voltage 12V DC
Sealing IP54
Set Weight 5.0 kg
Supply Ability 1000 Sets per Month
Peak Current 8A per set
Quiescent Current Below 0.1A
Delivery Time 8-18 working days bulk, stock dispatch within 5 days
Temperature Range -30°C to +70°C
Travel Time About 8 seconds
Cycle Life 50,000 operations
Actuators Two geared struts, sealed housing
Payment Terms T/T,L/C,Western Union,PayPal
Material Sealed geared strut, zinc-coated bracket, ABS controller
Brand Name Liush
Certification ISO 9001:2015
Place of Origin Guangdong, China
Model Number For DFSK Glory 580 Pro / Fengon 580 Pro

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Packaging Details Single set carton 79x21x19 cm, two sets 82x25x36 cm, foam lined and moisture protected Voltage 12V DC
Sealing IP54 Set Weight 5.0 kg
Supply Ability 1000 Sets per Month Peak Current 8A per set
Quiescent Current Below 0.1A Delivery Time 8-18 working days bulk, stock dispatch within 5 days
Temperature Range -30°C to +70°C Travel Time About 8 seconds
Cycle Life 50,000 operations Actuators Two geared struts, sealed housing
Payment Terms T/T,L/C,Western Union,PayPal Material Sealed geared strut, zinc-coated bracket, ABS controller
Brand Name Liush Certification ISO 9001:2015
Place of Origin Guangdong, China Model Number For DFSK Glory 580 Pro / Fengon 580 Pro
High Light Auto Open Trunk Kick Access ,Automatic Tail Gate Lift ,Electric Car Trunk Soft Close

Electric Trunk Lift Kit for DFSK Glory 580 Pro / Fengon 580 Pro

The 580 Pro trims brought a sharper front end and a more premium cabin, yet the boot still asks for a manual pull every time. This kit closes that gap. Two motorised actuators take the place of the gas springs, a controller reads the existing latch signals, and the driver gains remote, cabin and hands-free access. Every fixing point already exists on the car; nothing is cut, welded or painted, so the modification can be removed without leaving a mark.

How the Pro Body Differs

Compared with the standard 580, the Pro uses a different upper hinge stamping and a slightly longer spring. Our kit therefore ships with a dedicated bracket pair and an actuator matched to that travel. Buyers who are unsure of the body variant can send a photo of the hinge area and we will confirm before dispatch; the correct bracket set is included at no extra cost either way.

Key Benefits

  • Three ways to open and close: factory remote, supplied cabin button, or a foot sweep under the bumper.
  • Gentle acceleration, constant-speed travel and a cushioned landing, so the latch is guided rather than slammed.
  • Obstruction detection reverses the panel instantly, protecting hands, pets and cargo.
  • Two stored open heights suit basement garages, car washes and low canopies.
  • Commands are blocked unless the gear selector is in P, preventing movement while driving.
  • Manual operation stays available whenever power is off.
  • Sleep mode cuts draw below 0.1A after half a minute of inactivity.

Technical Data

ItemValue
FitmentDFSK Glory 580 Pro / Dongfeng Fengguang Fengon 580 Pro
Supply voltage12V DC
ActuatorsTwo geared struts, sealed housing
Travel timeAbout 8 seconds
Peak current8A per set
Quiescent currentBelow 0.1A
SealingIP54
Temperature range-30 C to +70 C
Cycle life50,000 operations tested
Set weight5.0 kg
Warranty24 months

Installation Checklist

  • Battery negative lead disconnected before any trim work.
  • Factory struts removed and stored with the vehicle file.
  • Pro bracket pair bolted to body and tailgate studs, torque per supplied card.
  • Powered actuators clipped in and harness routed along the original loom path.
  • Controller mounted in the rear quarter, plugs engaged until they click.
  • Cabin switch fitted, foot sensor bracket aligned with the bumper centre line.
  • Trim refitted, power restored, two learning cycles completed.
  • Height limit stored and function tested from all three trigger points.

A technician working alone finishes the list in around 90 minutes. A second car of the same model typically takes an hour.

Quality Gates

Every set passes a bench routine before boxing: actuator load, stroke timing, latch handshake, reversal force, sensor threshold and a visual check of the fastener bags. Brackets receive a zinc coating rated for humid coastal climates, harness terminals are crimped and pull-tested, and controllers are flashed with firmware for the 580 Pro stroke length only, so no field reconfiguration is needed.

Supply

Evaluation orders from one set. Bulk lead time 8 to 18 working days, stock dispatch within 5 days when available. Cartons hold one set at 79 x 21 x 19 cm or two sets at 82 x 25 x 36 cm, foam lined and moisture protected. Air, sea and express forwarding supported. OEM carton, manual and label printing from 200 sets. Fitting questions answered in English within one working day.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler

  • Year Established:

    2020

  • Total Annual:

    120,000,000-USD 150,000,000

  • Employee Number:

    400~500

  • Ecer Certification:

    Verified Supplier

Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...

+ Read More

Get in touch with us

  • Reach Us
  • Shenzhen Liush Auto Parts Co.,Ltd
  • Room 606, A Building, Convention and Exhibition Bay Zhonggang Plaza, Fengtang Blvd, Fuhai Street, Bao'an District, Shenzhen, 518103, China
  • https://www.liushtec.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement