| Standby Draw | 0.08A |
| Ingress Rating | IP54 |
| Delivery Time | 8-18 working days, earlier for stock items |
| Voltage | 12V DC |
| Opening Duration | About 7 seconds |
| Bench-Tested Cycles | 50,000 |
| Supply Ability | 1500 Sets per Month |
| Actuator Material | Steel tube, galvanised bracket, ABS module |
| Carton Dimensions | 78 x 21 x 19 cm (1 set) |
| Payment Terms | T/T,L/C,Western Union,Trade Assurance |
| Packaging Details | Foam-lined carton 78x21x19 cm per set, two sets 81x25x36 cm, fasteners bagged by step number |
| Working Temperature | -30°C to +70°C |
| Installation Time | 60-90 minutes |
| Kit Weight | 4.4 kg |
| Place of Origin | Guangdong, China |
| Certification | ISO 9001:2015 |
| Model Number | For Dongfeng Fengshen Aeolus Yixuan GS |
| Brand Name | Liush |
View Detail Information
Explore similar products
Electric Trunk Back Door Remote Control Power Liftgate Kit For Dongfeng Nammi 06
Automatic Electric Sliding Door Kit Remote Power Side Door For Dongfeng Yumsun
Door Remote Control Power Tailgate Retrofit Kit For Dongfeng Nammi 01
Electric Trunk Lift Kit Smart Tailgate Kit OEM Supported for Dongfeng Fengshen
Product Specification
| Standby Draw | 0.08A | Ingress Rating | IP54 |
| Delivery Time | 8-18 working days, earlier for stock items | Voltage | 12V DC |
| Opening Duration | About 7 seconds | Bench-Tested Cycles | 50,000 |
| Supply Ability | 1500 Sets per Month | Actuator Material | Steel tube, galvanised bracket, ABS module |
| Carton Dimensions | 78 x 21 x 19 cm (1 set) | Payment Terms | T/T,L/C,Western Union,Trade Assurance |
| Packaging Details | Foam-lined carton 78x21x19 cm per set, two sets 81x25x36 cm, fasteners bagged by step number | Working Temperature | -30°C to +70°C |
| Installation Time | 60-90 minutes | Kit Weight | 4.4 kg |
| Place of Origin | Guangdong, China | Certification | ISO 9001:2015 |
| Model Number | For Dongfeng Fengshen Aeolus Yixuan GS | Brand Name | Liush |
| High Light | Electric Trunk Lift Memory Height ,Auto Open Trunk Kick Sensor ,Automatic Trunk Opener Retrofit | ||
The Yixuan GS hatch is light enough to lift but awkward to reach once shopping, tools or a pram occupy both hands. This retrofit puts a geared actuator in place of each factory gas strut and a controller on the existing wiring run, so the boot answers to a fob press, an in-cabin button or a foot movement behind the bumper. The kit is built around the Yixuan GS mounting geometry: brackets bolt to the original studs, connectors mate with the factory plugs, and the interior trim is simply refitted afterwards.
The controller watches the latch signal and the motor current at the same time. When a valid trigger arrives it releases the latch, then drives both actuators forward through a ramped acceleration curve. Current is sampled continuously; any spike outside the normal band is read as an obstruction, so the panel stops, backs off and waits for a new command. Because the module keeps the factory latch motor in the loop, central locking, alarm state and the manual release all behave exactly as before.
| Parameter | Rating |
|---|---|
| Vehicle fitment | Dongfeng Fengshen Aeolus Yixuan GS |
| Supply voltage | 12V DC |
| Actuators | Two geared struts, sealed housings |
| Opening duration | About 7 seconds |
| Standby draw | 0.08A after sleep |
| Working temperature | -30 C to +70 C |
| Actuator ingress rating | IP54 |
| Bench-tested cycles | 50,000 |
| Total kit weight | 4.4 kg |
| Warranty period | 24 months |
Allow 60 to 90 minutes for the first vehicle; experienced fitters usually finish in well under an hour. No metal cutting, welding or painting is involved at any stage.
Two powered struts, one control module, vehicle harness, left and right brackets with matched bolts, a dash switch, a foot sensor with bracket, spare fuse, cable ties, written notes on the three trigger routes, and a photo guide in English. Fasteners are bagged by step number so nothing has to be sorted on the floor.
Confirm the model year before ordering, since bracket sets differ between pre-facelift and facelift Yixuan GS bodies. Tell us if the car has a factory roof spoiler or an aftermarket bike rack, because both change the safe opening height. If the vehicle is fitted with a non-standard alarm, share the wiring diagram and we will confirm connector compatibility before shipment.
Samples from one set are welcome. Bulk orders ship in 8 to 18 working days, with foam-lined cartons of 78 x 21 x 19 cm for one set and 81 x 25 x 36 cm for two. Air, sea and express forwarding are all supported, OEM carton and manual printing starts at 200 sets, and our engineers answer installation questions in English within one working day. Should a component fail inside the warranty window, we ship a replacement without requiring the faulty part to be returned first.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification:
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!