China factories

Chat Now Send Email
China factory - Shenzhen Liush Auto Parts Co.,Ltd

Shenzhen Liush Auto Parts Co.,Ltd

  • China,Shenzhen
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open
China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

  1. China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

  1. MOQ: 1 Set
  2. Price: US$150-230 / Set
  3. Get Latest Price
Sealing Rating IP66 actuator housing
Bracket Material Zinc nickel plated steel
Delivery Time 6-13 working days after payment
Temperature Range -30°C to +78°C
Cycle Life 47,000 open and close cycles
Door Mass Supported Up to 46 kg
Voltage 12V DC
Control Method Remote key, tail door handle, dash switch
Rated Force 660 N per actuator
Supply Ability 1750 Sets per Month
Set Weight 7.2 kg per set
Payment Terms T/T,L/C,Western Union,Trade Assurance
Packaging Details Printed carton with foam insert, single carton 84x25x23 cm, 1 set per carton, 2 cartons per master carton
Opening Time About 8 seconds
Certification ISO 9001:2015
Model Number for Haval H7 CHB041 CHB042
Brand Name Liush
Place of Origin Guangdong, China

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Sealing Rating IP66 actuator housing Bracket Material Zinc nickel plated steel
Delivery Time 6-13 working days after payment Temperature Range -30°C to +78°C
Cycle Life 47,000 open and close cycles Door Mass Supported Up to 46 kg
Voltage 12V DC Control Method Remote key, tail door handle, dash switch
Rated Force 660 N per actuator Supply Ability 1750 Sets per Month
Set Weight 7.2 kg per set Payment Terms T/T,L/C,Western Union,Trade Assurance
Packaging Details Printed carton with foam insert, single carton 84x25x23 cm, 1 set per carton, 2 cartons per master carton Opening Time About 8 seconds
Certification ISO 9001:2015 Model Number for Haval H7 CHB041 CHB042
Brand Name Liush Place of Origin Guangdong, China
High Light Automatic Tail Gate Opener ,Electric Trunk Lift Actuator ,Car Trunk Power Lift Kit

Electric Trunk Drive Back Door for the Haval H7 CHB041 CHB042

Remote control power tail door lift gate open retrofit
Vehicle
Haval H7, codes CHB041 and CHB042
Door
Rear tail door with factory struts
Control
Key, handle button, dash switch
Warranty
24 months against defects

The Haval H7 was built in two body codes, CHB041 and CHB042, and the two cars do not share the same rear door hardware: the strut ball stud height and the inner trim fixing differ between the five seat and the larger body. Fitting a single generic kit to both usually ends with a door that overshoots at the top or drops before the latch. This kit is offered with the correct actuator and bracket set for each code, so the cycle behaves the way an owner expects on the first press.

Installation reuses the factory ball studs and hinge points, and the harness uses the original connector behind the rear trim. Nothing is cut, drilled or welded, and the whole conversion can be reverted if the vehicle changes hands.

Product highlights

Automatic tail gate opener with stock key operationThe original remote opens the door on a long press and closes it on a second press. The handle button remains an active electric trigger, so the driver needs no additional fob and no coding at the dealer.
Electric trunk lift actuator sized for the H7 panelEach actuator delivers 660 N and carries a door mass of up to 46 kg, which covers the H7 panel with a rear spoiler or a light accessory bracket fitted.
Car trunk power lift kit with height memory and safetyStore a lower opening point for garages and low shelters, then clear it for full clearance. Current monitoring reverses the door on contact and a 20A fuse protects the circuit.

Application by body code

CodeApplicationKit variant
CHB041H7 five seat body, standard tail doorStandard actuator and bracket set
CHB042H7 long body, heavier rear door trimReinforced actuator and bracket set

Specification

ParameterValue
Actuator typeMotorised lift actuator pair
Force per actuator660 N
Door mass supportedUp to 46 kg
Supply voltage12V DC, negative ground
Full open timeAbout 8 seconds
Working temperature-30°C to +78°C
Design life47,000 open and close cycles
SealingIP66 actuator housing
Control inputsRemote key, tail door handle, dash switch
SafetyAnti pinch reverse, current limit, 20A fuse
Bracket finishZinc nickel plated steel
Set weight7.2 kg per set

Installation sequence

  1. Hold the tail door open, release both factory struts from the ball studs and keep the parts with the car.
  2. Fit the brackets for the matching body code, then mount the motorised actuators in the original position.
  3. Route the harness through the tail gate grommet beside the factory loom and connect the controller.
  4. Fit the dash switch, store the opening height, cycle twice and check the pinch reverse.
Always quote the body code (CHB041 or CHB042) and the model year when ordering, and send a photo of the open tail door if a rear ladder, spoiler extension or spare wheel bracket has been added. Left hand drive and right hand drive builds are both supported.

Packing and trade support

Each set ships in a printed carton with a foam insert, 84x25x23 cm, one set per carton and two cartons to a master carton, fasteners bagged per mounting position and a guide in English, Russian or Spanish. Every set runs a bench cycle for force, current draw and reverse response before sealing. Importers can order neutral cartons, private label printing, own part numbers and translated manuals, and actuators, controllers and switches are kept in stock for quick warranty settlement.

Send the body code, model year, drive side and quantity, and we will confirm the correct variant, the wholesale band at 150-230 US dollars per set and the next loading date.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler

  • Year Established:

    2020

  • Total Annual:

    120,000,000-USD 150,000,000

  • Employee Number:

    400~500

  • Ecer Certification:

    Verified Supplier

Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...

+ Read More

Get in touch with us

  • Reach Us
  • Shenzhen Liush Auto Parts Co.,Ltd
  • Room 606, A Building, Convention and Exhibition Bay Zhonggang Plaza, Fengtang Blvd, Fuhai Street, Bao'an District, Shenzhen, 518103, China
  • https://www.liushtec.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement