| Delivery Time | 8-18 working days bulk, stock dispatch within 5 days |
| Working Voltage | 12V DC |
| Set Weight | 4.8 kg |
| Supply Ability | 1200 Sets per Month |
| Operation Time | 7-8 seconds |
| Fuse Rating | 15A |
| Actuator Type | Twin geared struts, sealed steel tube |
| Packaging Details | One set carton 79x21x19 cm, two sets 81x25x36 cm, foam lined with moisture protection |
| Rig Cycles | 50,000 passed |
| Payment Terms | T/T,L/C,Western Union,PayPal |
| Peak Current | 8A |
| Temperature Range | -30°C to +70°C |
| Standby Current | Under 0.1A |
| Ingress Protection | IP54 |
| Place of Origin | Guangdong, China |
| Brand Name | Liush |
| Certification | ISO 9001:2015 |
| Model Number | For DFSK Glory 560 / Fengguang S560 |
View Detail Information
Explore similar products
Electric Trunk Back Door Remote Control Power Liftgate Kit For Dongfeng Nammi 06
Automatic Electric Sliding Door Kit Remote Power Side Door For Dongfeng Yumsun
Door Remote Control Power Tailgate Retrofit Kit For Dongfeng Nammi 01
Electric Trunk Lift Kit Smart Tailgate Kit OEM Supported for Dongfeng Fengshen
Product Specification
| Delivery Time | 8-18 working days bulk, stock dispatch within 5 days | Working Voltage | 12V DC |
| Set Weight | 4.8 kg | Supply Ability | 1200 Sets per Month |
| Operation Time | 7-8 seconds | Fuse Rating | 15A |
| Actuator Type | Twin geared struts, sealed steel tube | Packaging Details | One set carton 79x21x19 cm, two sets 81x25x36 cm, foam lined with moisture protection |
| Rig Cycles | 50,000 passed | Payment Terms | T/T,L/C,Western Union,PayPal |
| Peak Current | 8A | Temperature Range | -30°C to +70°C |
| Standby Current | Under 0.1A | Ingress Protection | IP54 |
| Place of Origin | Guangdong, China | Brand Name | Liush |
| Certification | ISO 9001:2015 | Model Number | For DFSK Glory 560 / Fengguang S560 |
| High Light | Power Tailgate Lift Struts Kit ,Auto Car Lift Memory Height ,Automatic Trunk Soft Close | ||
Seven seats mean seven reasons to open the boot: school bags, strollers, market crates, tools for work. Doing that by hand on a tall SUV several times a day is tiring, and in rain it is worse. This power liftgate kit answers the problem with a matched set of motorised struts, a control module and a plug-in harness built for the Glory 560 and S560 bodies. Nothing is welded, nothing is drilled, and the vehicle can be returned to standard specification whenever the owner wishes.
The factory tailgate is wide and reaches chest height, which puts the handle out of comfortable range for shorter drivers. Families loading child seats, drivers working ride-hailing shifts and small businesses using the S560 as a light delivery vehicle all tell us the same thing: one powered button changes how often they use the boot. The kit also adds hands-free access, which matters when both arms are full.
Open or close from the remote, the cabin switch, the rear handle or a foot movement under the bumper. The panel accelerates gently, runs at constant speed and finishes with a cushioned close so the latch is guided in rather than slammed. If the lid meets resistance, the module stops and reverses; if the selector is not in P, the command never executes. Two height limits can be stored, which helps with basement parking and low workshop roller doors. In sleep mode the system draws less than 0.1A.
| Item | Detail |
|---|---|
| Vehicle fitment | DFSK Glory 560 / Dongfeng Fengguang S560 |
| Working voltage | 12V DC |
| Actuator | Twin geared struts, sealed steel tube |
| Operation time | 7 to 8 seconds full travel |
| Peak current | 8A |
| Standby current | Under 0.1A |
| Ingress protection | IP54 |
| Temperature range | -30 C to +70 C |
| Rig cycles | 50,000 passed |
| Set weight | 4.8 kg |
| Warranty | 24 months |
Access to the upper strut mounts requires removing the rear pillar trim, which clips out without tools beyond a plastic wedge. The third row of seats does not need to come out. Route the harness along the existing tailgate loom, secure it with the supplied ties every 200 mm, and keep clear of the hinge sweep. After the electrical work, run the two-cycle learning routine with the tailgate fully open, then store the height limit that suits the owner. First-time fitting takes around 90 minutes.
Each set is bench tested before packing: motor load, stroke timing, latch handshake, reversal force and sensor threshold. Actuators, modules, harnesses, brackets and switches are listed as separate service parts so a fleet can stock only the items that wear. Failed components inside the warranty window are replaced without requiring the old part to be returned first.
Evaluation orders from one set. Bulk lead time is 8 to 18 working days, with stock dispatch inside 5 days when available. Cartons measure 79 x 21 x 19 cm for one set and 81 x 25 x 36 cm for two, foam lined with moisture protection. Shipping by air, sea or express. OEM carton and manual printing available from 200 sets. Technical questions answered in English within one working day.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification:
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!