| Full Travel | 8 seconds |
| Set Weight | 5.1 kg |
| Supply Ability | 950 Sets per Month |
| Rig Cycles | 50,000 |
| Sensor Levels | Three sensitivity settings |
| Peak Current | 8A |
| Packaging Details | One set carton 79x21x19 cm, two sets 82x25x36 cm, foam lined with moisture barrier bag |
| Sealing | IP54 |
| Thermal Range | -30 C to +70 C |
| Payment Terms | T/T,L/C,Western Union,Trade Assurance |
| Open Heights | Two stored heights, 1 cm steps |
| Delivery Time | 8-18 working days bulk, stock dispatch within 5 days |
| Standby Current | 0.1A or less |
| Voltage | 12V DC negative ground |
| Certification | ISO 9001:2015 |
| Place of Origin | Guangdong, China |
| Brand Name | Liush |
| Model Number | For DFSK 600 / Fengon 580 Mk2 |
View Detail Information
Explore similar products
Electric Trunk Back Door Remote Control Power Liftgate Kit For Dongfeng Nammi 06
Automatic Electric Sliding Door Kit Remote Power Side Door For Dongfeng Yumsun
Door Remote Control Power Tailgate Retrofit Kit For Dongfeng Nammi 01
Electric Trunk Lift Kit Smart Tailgate Kit OEM Supported for Dongfeng Fengshen
Product Specification
| Full Travel | 8 seconds | Set Weight | 5.1 kg |
| Supply Ability | 950 Sets per Month | Rig Cycles | 50,000 |
| Sensor Levels | Three sensitivity settings | Peak Current | 8A |
| Packaging Details | One set carton 79x21x19 cm, two sets 82x25x36 cm, foam lined with moisture barrier bag | Sealing | IP54 |
| Thermal Range | -30 C to +70 C | Payment Terms | T/T,L/C,Western Union,Trade Assurance |
| Open Heights | Two stored heights, 1 cm steps | Delivery Time | 8-18 working days bulk, stock dispatch within 5 days |
| Standby Current | 0.1A or less | Voltage | 12V DC negative ground |
| Certification | ISO 9001:2015 | Place of Origin | Guangdong, China |
| Brand Name | Liush | Model Number | For DFSK 600 / Fengon 580 Mk2 |
| High Light | Electric Tailgate Lift with Sensor ,Automatic Trunk Opener OEM ,Auto Tailgate Soft Stop | ||
One vehicle, two badges: the DFSK 600 and the Fengon 580 Mk2 share the same body and the same rear aperture. This kit serves both. It converts the manual boot lid into a powered one using two motorised struts, a controller wired into the factory loom, and a foot sensor that reads a deliberate kick. Fixings use the existing threaded points, so the conversion is reversible and leaves the paint untouched.
Distributors often stock the same hardware under both model names, so we print a neutral label and pack one bracket set that covers the Mk2 body. If an order is split between the two badges, tell us at the time of booking and both cartons will carry the correct documentation and fitting manual reference.
| Trigger | Open | Close |
|---|---|---|
| Factory remote key | Long press boot key | Long press boot key |
| Cabin button (supplied) | Single press | Single press |
| Rear handle switch | Press after unlock | Press while open |
| Foot sensor | Sweep under bumper | Sweep under bumper |
The capacitive strip sits behind the bumper skin and only reacts to a forward-and-back motion within its field. Rain, road spray, exhaust heat and small animals do not trigger it. Sensitivity can be set at installation from three levels; most fitters leave it on the middle setting, which suits both thin and heavy footwear. A two-second lockout after each command prevents double activation.
| Item | Value |
|---|---|
| Vehicles | DFSK 600 / Dongfeng Fengguang Fengon 580 Mk2 |
| System voltage | 12V DC negative ground |
| Actuator set | Two geared struts, sealed steel tube |
| Full travel | 8 seconds |
| Peak current | 8A |
| Standby current | 0.1A or less |
| Sealing | IP54 |
| Thermal range | -30 C to +70 C |
| Rig cycles | 50,000 |
| Set weight | 5.1 kg |
| Warranty | 24 months |
A 10 mm and 13 mm socket, a plastic trim wedge, side cutters for cable ties and a multimeter are enough. Plan 90 minutes for the first vehicle, 60 for the second, and 45 once the technician knows the routing. No welding, drilling or paint work is involved.
Cartons hold one set at 79 x 21 x 19 cm or two sets at 82 x 25 x 36 cm, foam lined with a moisture barrier bag. Fasteners are bagged by step. Bulk lead time runs 8 to 18 working days with stock dispatch inside 5 days when available. Air, sea and express options are quoted on request. Component failures inside the warranty window are replaced without waiting for the faulty part to return, and our technical desk answers fitting questions in English within one working day.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification:
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!