China factories

Chat Now Send Email
China factory - Shenzhen Liush Auto Parts Co.,Ltd

Shenzhen Liush Auto Parts Co.,Ltd

  • China,Shenzhen
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Aftermarket Power Liftgate Retrofit OEM Supported Boot Opening for Dongfeng
China Aftermarket Power Liftgate Retrofit OEM Supported Boot Opening for Dongfeng

  1. China Aftermarket Power Liftgate Retrofit OEM Supported Boot Opening for Dongfeng

Aftermarket Power Liftgate Retrofit OEM Supported Boot Opening for Dongfeng

  1. MOQ: 1 Set
  2. Price: US$150-230 / Set
  3. Get Latest Price
Supply Ability 900 Sets per Month
Idle Current Under 0.1A
Material Sealed geared strut, steel bracket, ABS module
Full Stroke 7-8 seconds
Working Temperature -30°C to +70°C
Set Weight 4.7 kg
Peak Current 8A
Payment Terms T/T,L/C,Western Union,PayPal
Tested Cycles 50000
Delivery Time 8-18 working days bulk, stock dispatch within 5 days
Installation Original fixing points, plug-in terminals
Sealing IP54
Voltage 12V DC
Packaging Details One set carton 79x21x19 cm, two sets 82x25x36 cm, foam lined with moisture barrier bag
Certification ISO 9001:2015
Model Number For Dongfeng Forthing T5 / Farda T5
Brand Name Liush
Place of Origin Guangdong, China

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Supply Ability 900 Sets per Month Idle Current Under 0.1A
Material Sealed geared strut, steel bracket, ABS module Full Stroke 7-8 seconds
Working Temperature -30°C to +70°C Set Weight 4.7 kg
Peak Current 8A Payment Terms T/T,L/C,Western Union,PayPal
Tested Cycles 50000 Delivery Time 8-18 working days bulk, stock dispatch within 5 days
Installation Original fixing points, plug-in terminals Sealing IP54
Voltage 12V DC Packaging Details One set carton 79x21x19 cm, two sets 82x25x36 cm, foam lined with moisture barrier bag
Certification ISO 9001:2015 Model Number For Dongfeng Forthing T5 / Farda T5
Brand Name Liush Place of Origin Guangdong, China
High Light Electric Trunk Lift OEM Bracket ,Automatic Trunk Opener Module ,Auto Open Trunk Foot Sweep

Aftermarket Power Liftgate Retrofit - Dongfeng Forthing T5 / Farda T5

The Forthing T5, sold in several markets as the Farda T5, has a wide rear hatch that sits high off the ground. Closing it by hand is a stretch for many drivers and a nuisance in rain. This retrofit gives the tailgate its own motor drive: two powered struts replace the gas springs, a module taps into the existing latch wiring, and the hatch opens and closes on command. The kit installs on the original fixing points, so the body is never modified and the vehicle can be returned to factory specification.

Model Line-Up Note

The T5, T5 Evo and Friday EV use different rear apertures, so this kit is specific to the T5 body. It is not interchangeable with the Evo or EV versions. When ordering for a market where the car is badged Farda T5, the same part applies; we only need the model year to confirm the spring length used on that production run.

Package Contents

  • Two motorised struts with sealed gear drives.
  • Liftgate control module, pre-flashed for the T5 stroke length.
  • Plug-in harness with factory-style terminals.
  • Left and right mounting brackets with matched bolts and washers.
  • Cabin open-close button with status LED.
  • Foot sensor strip and bumper bracket.
  • 15A fuse, cable ties, torque card and English fitting manual.

Operating Logic and Safety

Commands arrive from four sources: the factory remote, the cabin button, the rear handle switch or the foot sensor. The module verifies the gear position first, then releases the latch and drives the struts through a soft-start curve. Current is sampled many times per second; any anomaly stops the panel and reverses it, so a hand, a bicycle or a pet is never trapped. Two open heights can be memorised, which covers low car parks and shorter drivers. At the end of travel the panel is drawn in gently rather than dropped, protecting the latch and the weather seals. With the ignition off the system falls asleep after 30 seconds and draws almost nothing.

Parameters

ItemData
FitmentDongfeng Forthing T5 / Farda T5
Voltage12V DC
ActuatorsTwo geared struts, sealed housing
Full stroke7 to 8 seconds
Peak current8A
Idle currentUnder 0.1A
SealingIP54
Working temperature-30 C to +70 C
Tested cycles50,000
Set weight4.7 kg
Warranty24 months

Dealer Programme

Workshops fitting several T5 units per month can order in cartons of two or four sets with a shared manual pack. We can print dealer branding on the carton and manual from 200 sets, supply a laminated torque and routing sheet for the workshop wall, and provide a spare-parts list covering actuators, modules, harnesses, switches and brackets. Fleet customers receive a consolidated packing list so each vehicle kit can be booked out separately.

Packing and Lead Time

Single sets travel in a foam-lined carton of 79 x 21 x 19 cm; two sets in 82 x 25 x 36 cm. Every carton includes a moisture barrier bag and step-numbered fastener packs. Bulk lead time is 8 to 18 working days, with stock dispatch inside 5 days when available. Air, sea and express shipping are all quoted on request, and technical questions are answered in English within one working day.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler

  • Year Established:

    2020

  • Total Annual:

    120,000,000-USD 150,000,000

  • Employee Number:

    400~500

  • Ecer Certification:

    Verified Supplier

Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...

+ Read More

Get in touch with us

  • Reach Us
  • Shenzhen Liush Auto Parts Co.,Ltd
  • Room 606, A Building, Convention and Exhibition Bay Zhonggang Plaza, Fengtang Blvd, Fuhai Street, Bao'an District, Shenzhen, 518103, China
  • https://www.liushtec.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement