| Control Inputs | Remote fob, cabin switch, tailgate handle switch |
| System Voltage | 12V DC |
| Operating Temperature | -30 C to +80 C |
| Packaging Details | Printed carton with foam-cradled actuators and printed position guide, five-ply export carton 82x26x22 cm with corner boards |
| Sealing Rating | IP55 module, IP65 actuators |
| Rated Thrust | 420 N per actuator |
| Door Mass Supported | Up to 49 kg |
| Safety Features | Bidirectional obstruction reversal, over-current cut-off, P-gear interlock |
| Supply Ability | 2100 Sets per Month |
| Remote Range | Up to 30 metres |
| Net Weight | 7.6 kg per set |
| Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 12-22 Working Days |
| Cycle Time | 7-9 seconds each direction |
| Place of Origin | Guangdong, China |
| Model Number | for Jetour Traveller T2 2024-2026 |
| Brand Name | Liush |
| Certification | ISO 9001:2015 |
View Detail Information
Explore similar products
Power Trunk Retrofit Kit for Soueast DX8 Plus Prime for Jetour X70 Plus Electric
Electric Tail Gate Kits Remote Control Power Lift Gate Power Trunk Retrofit for
Aftermarket Power Lift Gate Upgrade for Jetour Zongheng G700 2026-2027 Trunk
Auto Liftgate Conversion Kit for Jetour X90 Plus Remote Control Electric Trunk
Product Specification
| Control Inputs | Remote fob, cabin switch, tailgate handle switch | System Voltage | 12V DC |
| Operating Temperature | -30 C to +80 C | Packaging Details | Printed carton with foam-cradled actuators and printed position guide, five-ply export carton 82x26x22 cm with corner boards |
| Sealing Rating | IP55 module, IP65 actuators | Rated Thrust | 420 N per actuator |
| Door Mass Supported | Up to 49 kg | Safety Features | Bidirectional obstruction reversal, over-current cut-off, P-gear interlock |
| Supply Ability | 2100 Sets per Month | Remote Range | Up to 30 metres |
| Net Weight | 7.6 kg per set | Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 12-22 Working Days | Cycle Time | 7-9 seconds each direction |
| Place of Origin | Guangdong, China | Model Number | for Jetour Traveller T2 2024-2026 |
| Brand Name | Liush | Certification | ISO 9001:2015 |
| High Light | Tail Gate Power Open Retrofit ,Electric Trunk Remote T2 ,Auto Tailgate Kit Traveller | ||
The Traveller T2 is built as a boxy lifestyle 4x4, and its rear door is tall, flat and heavy — one of the more demanding panels in the Jetour range to open by hand on a slope or with an armful of gear. This retrofit kit replaces the factory gas struts with a synchronised motorised actuator pair, adds a control module set for the T2 mounting points, and keeps the original wiring untouched by using a plug-in harness adapter.
| Parameter | Specification |
|---|---|
| Fitment | Jetour Traveller T2, model years 2024-2026 |
| System Voltage | 12V DC |
| Actuators | Twin motorised lift actuators, ball-socket ends |
| Rated Thrust | 420 N per actuator |
| Rear Door Mass Supported | Up to 49 kg |
| Remote Range | Up to 30 metres, rolling code |
| Control Inputs | Remote fob, cabin switch, tailgate handle switch |
| Cycle Time | 7-9 seconds each direction |
| Safety | Bidirectional obstruction reversal, over-current cut-off, P-gear interlock |
| Sealing | IP55 module, IP65 actuators |
| Operating Range | -30 C to +80 C |
| Net Weight | 7.6 kg per set |
Off-road styled SUVs often carry accessories on the rear door, so check the current panel weight against the 49 kg rating before fitting — a spare wheel or storage box bolted to the door may need to be removed or countered. Support the door before releasing the original struts, set the module preset for the T2, then fit the brackets to the factory mounting points following the printed position guide. The harness adapter plugs into the existing rear-door connector; only the fused power lead and ground are wired separately. First fit is around 2 hours, repeat fits 70-85 minutes, fully reversible.
Exporters serving off-road and overland accessory channels in the Middle East, CIS, Latin America and Southeast Asia; 4x4 modification shops; camping and outdoor equipment retailers adding vehicle accessories; and distributors covering the growing boxy-SUV segment. Buyers in this segment spend heavily on vehicle accessories, which suits a convenience upgrade at this price band.
Each set ships in a printed carton with foam-cradled actuators, labelled fasteners, the printed position guide and a bilingual fitting manual, inside a five-ply export box with corner boards. Bench testing covers 400 duty cycles, synchronous travel, reversal force, remote pairing and standby current. Production follows ISO 9001:2015; warranty is 24 months on actuators and 12 months on the control module.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification:
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!