Shenzhen Liush Auto Parts Co.,Ltd
| Packaging Details | Printed box with EPE foam, single carton 80x22x21 cm, 2 sets per master carton 82x25x37 cm |
| Cycle Life | 46,000 open and close cycles |
| Rated Force | 600 N per actuator |
| Bracket Material | Steel with powder coating |
| Supply Ability | 2400 Sets per Month |
| Control Method | Remote key, rear handle, dash button |
| Payment Terms | T/T,Western Union,PayPal,L/C |
| Temperature Range | -28°C to +78°C |
| Door Mass Supported | Up to 40 kg |
| Sealing | IP65 actuator and plug |
| Delivery Time | 4-10 working days after payment |
| Opening Time | About 6 seconds |
| Voltage | 12V DC |
| Set Weight | 6.8 kg per set |
| Model Number | for Haval H4 2018-2020 |
| Place of Origin | Guangdong, China |
| Certification | ISO 9001:2015 |
| Brand Name | Liush |
View Detail Information
Explore similar products
Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open
Electric Trunk Drive Kit Haval Dargo Remote Control Power Tail Door Lift Gate
Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open
Electric Trunk Lift Kit Automatic Power Tailgate Retrofit Smart Tail Door Opener
Product Specification
| Packaging Details | Printed box with EPE foam, single carton 80x22x21 cm, 2 sets per master carton 82x25x37 cm | Cycle Life | 46,000 open and close cycles |
| Rated Force | 600 N per actuator | Bracket Material | Steel with powder coating |
| Supply Ability | 2400 Sets per Month | Control Method | Remote key, rear handle, dash button |
| Payment Terms | T/T,Western Union,PayPal,L/C | Temperature Range | -28°C to +78°C |
| Door Mass Supported | Up to 40 kg | Sealing | IP65 actuator and plug |
| Delivery Time | 4-10 working days after payment | Opening Time | About 6 seconds |
| Voltage | 12V DC | Set Weight | 6.8 kg per set |
| Model Number | for Haval H4 2018-2020 | Place of Origin | Guangdong, China |
| Certification | ISO 9001:2015 | Brand Name | Liush |
| High Light | Automatic Trunk Opener Assembly ，Car Electric Trunk Lifter ，Auto Trunk Lift Kit | ||
The Haval H4 sold between 2018 and 2020 sits on a stretched version of the small SUV platform, so its tail door is taller than the H2 panel but the hinge position and the strut geometry are its own. That means generic kits either strain at the top of travel or let the door drop too fast near the seal. This kit is set up specifically for the H4 shell: actuator force, the opening speed curve and the harness length are all matched to the car.
The retrofit removes the two gas struts and puts motorised actuators on the same ball studs, then adds a controller behind the rear trim. The original remote, the tail door handle and a switch in the cabin all operate the door, and every fixing point is factory, so the body is never drilled, welded or repainted.
| Model | Haval H4, model years 2018 to 2020 |
|---|---|
| Note | H4 hinge and strut positions differ from H2 and H6 kits |
| Contents | 2 electric lift actuators, controller, harness, ball stud adaptors, cabin button, fastener bag, guide |
| Install time | Under 2 hours with hand tools, no trim cutting |
| Parameter | Value |
|---|---|
| Actuator type | Electric lift actuator pair |
| Force per actuator | 600 N |
| Door mass supported | Up to 40 kg |
| Supply voltage | 12V DC, negative ground |
| Full open time | About 6 seconds |
| Working temperature | -28°C to +78°C |
| Design life | 46,000 open and close cycles |
| Sealing | IP65 actuator and plug |
| Control inputs | Remote key, rear handle, dash button |
| Safety | Anti pinch, thermal cut out, 15A fuse |
| Bracket finish | Steel with powder coating |
| Set weight | 6.8 kg per set |
The actuator pair is set in EPE foam inside a printed box, single carton 80x22x21 cm, two sets to a master carton of 82x25x37 cm, with fasteners grouped by mounting position and an English, Russian or Spanish guide. Each set is cycled on the bench for force, current draw and pinch response before packing. For importers we offer neutral cartons, private label printing, own part numbers and translated manuals, and keep actuators, controllers and switches in stock so warranty claims are settled quickly.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification：
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!