China factories

Chat Now Send Email
China factory - Shenzhen Liush Auto Parts Co.,Ltd

Shenzhen Liush Auto Parts Co.,Ltd

  • China,Shenzhen
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open
China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

  1. China Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

Electric Trunk Drive Back Door Remote Control Power Tail Door Lift Gate Open

  1. MOQ: 1 Set
  2. Price: US$150-230 / Set
  3. Get Latest Price
Fuse Rating 30A fuse
Voltage 12V DC
Hinge Plate Material 6 mm galvanised steel plate
Packaging Details Reinforced carton with foam blocks, single carton 88x26x24 cm, 1 set per carton, 2 cartons per master carton
Actuator Type Heavy duty motorised actuator pair
Delivery Time 8-15 working days after payment
Supply Ability 1600 Sets per Month
Temperature Range -30°C to +75°C
Sealing IP67 housing and connector
Rated Force 780 N per actuator
Payment Terms T/T,Western Union,L/C at sight
Cycle Life 42,000 open and close cycles
Door Mass Supported Up to 55 kg
Opening Time About 9 seconds
Brand Name Liush
Certification ISO 9001:2015
Model Number for Haval H8 2014-2018
Place of Origin Guangdong, China

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Fuse Rating 30A fuse Voltage 12V DC
Hinge Plate Material 6 mm galvanised steel plate Packaging Details Reinforced carton with foam blocks, single carton 88x26x24 cm, 1 set per carton, 2 cartons per master carton
Actuator Type Heavy duty motorised actuator pair Delivery Time 8-15 working days after payment
Supply Ability 1600 Sets per Month Temperature Range -30°C to +75°C
Sealing IP67 housing and connector Rated Force 780 N per actuator
Payment Terms T/T,Western Union,L/C at sight Cycle Life 42,000 open and close cycles
Door Mass Supported Up to 55 kg Opening Time About 9 seconds
Brand Name Liush Certification ISO 9001:2015
Model Number for Haval H8 2014-2018 Place of Origin Guangdong, China
High Light Electric Trunk Lift Mechanism ,Automatic Tail Gate Lift Kit ,Auto Open Trunk Retrofit

Electric Trunk Drive Back Door for the Haval H8 2014-2018

Remote control power tail door lift gate open retrofit · heavy duty actuator set

The Haval H8 is a full size seven seat SUV with a wide, tall tail door and a thick inner trim panel. Between 2014 and 2018 it was exported to Russia, Australia, South Africa, Saudi Arabia and Chile, and the great majority of those cars left the line with gas struts and a manual handle. A door of that size is awkward to lift with one hand and dangerous to let drop on a child or a dog, which is exactly the gap this retrofit fills.

Two heavy duty motorised actuators take the place of the original struts, driving from the factory remote, the tail door button and a switch on the dashboard. The hinge plates and latch striker are the original items, so the body shell is never drilled, welded or painted.

Selling points
01Electric trunk lift mechanism rated for a large panelEach actuator delivers 780 N and is matched to the H8 door mass of up to 55 kg, so the panel rises at a steady rate even in cold weather when gas struts typically sag.
02Automatic trunk lift kit wired to the stock remoteA long press on the original key starts the cycle, a second long press closes it, and the tail door button keeps working as an electric trigger. No extra fob, no phone app, no dealer coding.
03Auto open trunk retrofit with safety logicPinch rebound reverses the panel on contact, stall detection cuts motor power at the end of travel, and a 30A fuse protects the circuit. The opening height can be stored for low car parks.
Vehicle and kit data
VehicleHaval H8, model years 2014 to 2018
Door typeFull size tail gate with inner trim panel and factory struts
Kit contents2 heavy duty actuators, controller, harness, hinge plates, driver switch, fastener bag, manual
Fitting timeAbout 3 hours for a first installation with hand tools
Specification
ParameterRating
Actuator typeHeavy duty motorised actuator pair
Force per actuator780 N
Door mass supportedUp to 55 kg
Supply12V DC, negative ground
Full open timeAbout 9 seconds
Working temperature-30°C to +75°C
Design life42,000 open and close cycles
SealingIP67 housing and connector
Control inputsSmart key, tail door button, driver switch
SafetyAnti pinch reverse, stall detection, 30A fuse
Hinge plate6 mm steel plate, galvanised
Fitting order
  • Hold the tail door up, release the original struts from both ball studs and store them with the vehicle.
  • Fit the galvanised hinge plates and mount the heavy duty actuators in the original strut position.
  • Route the harness beside the factory loom through the tail gate grommet and plug the controller in.
  • Mount the driver switch, record the opening height, cycle the door twice and test the pinch rebound.
Later H8 production changed the tail door trim fixing and the strut ball stud height. Please send a photo of the open door before dispatch, particularly if a rear ladder, tow bar mounted bike rack or spare wheel bracket is fitted. Left hand drive and right hand drive builds are both supported.
Packing and service

Each set ships in a reinforced carton with foam blocks, 88x26x24 cm, one set per carton and two cartons to a master carton; fasteners are bagged by mounting position and the guide is printed in English, Russian or Arabic on request. Every set is load cycled on the bench and checked for current draw and rebound response before sealing. Importers can order neutral packing, private label cartons, own part numbers and translated manuals, and spare actuators, controllers and switches are held in stock.

Send the model year, drive side and quantity, and we will confirm the H8 specification, the wholesale band at 150-230 US dollars per set and the next loading date.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler

  • Year Established:

    2020

  • Total Annual:

    120,000,000-USD 150,000,000

  • Employee Number:

    400~500

  • Ecer Certification:

    Verified Supplier

Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...

+ Read More

Get in touch with us

  • Reach Us
  • Shenzhen Liush Auto Parts Co.,Ltd
  • Room 606, A Building, Convention and Exhibition Bay Zhonggang Plaza, Fengtang Blvd, Fuhai Street, Bao'an District, Shenzhen, 518103, China
  • https://www.liushtec.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement