| Supply Ability | 1100 Sets per Month |
| Thermal Range | -30 C to +70 C |
| Actuator Count | Two geared struts |
| Payment Terms | T/T,L/C,Western Union,Trade Assurance |
| Packaging Details | One set carton 79x21x19 cm, two sets 82x25x36 cm, foam lined with moisture barrier bag |
| Set Weight | 4.9 kg |
| Ingress Rating | IP54 |
| Peak Draw | 8A per set |
| Full Travel | 7-8 seconds |
| Delivery Time | 8-18 working days bulk, stock dispatch within 5 days |
| Rig Cycles | 50,000 |
| Sleep Draw | Below 0.1A |
| Voltage | 12V DC Negative Ground |
| Carton Dimensions | 79 x 21 x 19 cm |
| Place of Origin | Guangdong, China |
| Brand Name | Liush |
| Model Number | For DFSK Glory 580 / Fengon 580 Facelift |
| Certification | ISO 9001:2015 |
View Detail Information
Explore similar products
Electric Trunk Back Door Remote Control Power Liftgate Kit For Dongfeng Nammi 06
Automatic Electric Sliding Door Kit Remote Power Side Door For Dongfeng Yumsun
Door Remote Control Power Tailgate Retrofit Kit For Dongfeng Nammi 01
Smart Tailgate Kit Automatic Boot Opening System Power Lift Struts for Dongfeng
Product Specification
| Supply Ability | 1100 Sets per Month | Thermal Range | -30 C to +70 C |
| Actuator Count | Two geared struts | Payment Terms | T/T,L/C,Western Union,Trade Assurance |
| Packaging Details | One set carton 79x21x19 cm, two sets 82x25x36 cm, foam lined with moisture barrier bag | Set Weight | 4.9 kg |
| Ingress Rating | IP54 | Peak Draw | 8A per set |
| Full Travel | 7-8 seconds | Delivery Time | 8-18 working days bulk, stock dispatch within 5 days |
| Rig Cycles | 50,000 | Sleep Draw | Below 0.1A |
| Voltage | 12V DC Negative Ground | Carton Dimensions | 79 x 21 x 19 cm |
| Place of Origin | Guangdong, China | Brand Name | Liush |
| Model Number | For DFSK Glory 580 / Fengon 580 Facelift | Certification | ISO 9001:2015 |
| High Light | Automatic Trunk Opener Kit ,Auto Open Trunk Hands Free ,Car Electric Trunk Assembly | ||
The facelift 580 kept the generous boot that made the original popular, but the tailgate is still all manual. Our conversion kit changes that with a matched hardware set: two motorised struts in place of the gas springs, a controller that reads the factory latch, and a loom that clicks into the body connector. Because every bracket follows the OEM hole pattern, the installation leaves no trace on the bodywork and can be undone in the same afternoon.
The facelift body uses a revised upper hinge and a different strut ball-stud position compared with the pre-facelift car. This kit ships with the facelift bracket pair and the corresponding actuator stroke, so the lid stops exactly where the factory design intends. If a buyer is unsure which body they have, a photo of the hinge area settles it, and we will swap the bracket set before dispatch at no charge.
| Parameter | Figure |
|---|---|
| Fitted vehicle | DFSK Glory 580 / Fengon 580 facelift body |
| Voltage | 12V DC negative ground |
| Actuator count | Two geared struts |
| Full travel | 7 to 8 seconds |
| Peak draw | 8A per set |
| Sleep draw | Below 0.1A |
| Ingress rating | IP54 |
| Thermal range | -30 C to +70 C |
| Rig cycles | 50,000 |
| Set weight | 4.9 kg |
| Cover | 24 months |
| Step | Work | Time |
|---|---|---|
| 1 | Battery isolation and removal of the factory struts | 10 min |
| 2 | Bracket fitting to body and tailgate studs | 20 min |
| 3 | Actuator clipping and harness routing | 25 min |
| 4 | Module mounting, cabin switch and foot sensor | 20 min |
| 5 | Trim refit, power restore and learning routine | 15 min |
Total workshop time is around 90 minutes for the first vehicle and noticeably less on repeat fits. No cutting, welding or painting appears anywhere in the procedure.
One set per foam-lined carton at 79 x 21 x 19 cm, two sets at 82 x 25 x 36 cm, both with a moisture barrier bag. Fasteners are grouped by installation step so the technician works straight down the manual instead of sorting bolts on the floor.
Minimum order one set for evaluation. Bulk lead time 8 to 18 working days, stock dispatch inside 5 days when available. Air, sea and express forwarding supported. OEM carton, manual and label printing from 200 sets. Replacement actuators, modules, harnesses and switches are available as separate service parts. Technical questions answered in English within one working day.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification:
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!