Shenzhen Liush Auto Parts Co.,Ltd
| Body | Mid-size SUV with broad glass lid |
| Stroke | 355 mm |
| Cycle Test | 41,000 operations |
| Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 8-14 Working Days |
| OEM/ODM | Support from 15 sets |
| Power | 12V DC, 15A fused |
| Supply Ability | 1200 Sets per Month |
| Packaging Details | 1 set per carton 85x24x21 cm, actuators in EPE sleeves, 4 cartons per master carton |
| Model | GAC Trumpchi GS5 II |
| Door Mass Supported | Up to 44 kg |
| Test Standard | 80C heat soak, -30C cold start, 95% RH |
| Actuator Force | 570 N per side |
| Warranty | 24 Months |
| Brand Name | Liush |
| Place of Origin | Guangdong, China |
| Model Number | GAC Trumpchi GS5 II |
| Certification | ISO 9001:2015 |
View Detail Information
Explore similar products
Retrofit Auto Power Tailgate Hands-Free Liftgate Struts Kit OEM Supported for
Retrofit Auto Power Tailgate SUV Electric Trunk Lift Kit Soft Close Power
Retrofit Auto Power Tailgate SUV Aftermarket Retrofit Kick Sensor for GAC
Retrofit Auto Power Tailgate SUV OEM Supported Hands-Free Liftgate for GAC
Product Specification
| Body | Mid-size SUV with broad glass lid | Stroke | 355 mm |
| Cycle Test | 41,000 operations | Payment Terms | T/T,L/C,Western Union |
| Delivery Time | 8-14 Working Days | OEM/ODM | Support from 15 sets |
| Power | 12V DC, 15A fused | Supply Ability | 1200 Sets per Month |
| Packaging Details | 1 set per carton 85x24x21 cm, actuators in EPE sleeves, 4 cartons per master carton | Model | GAC Trumpchi GS5 II |
| Door Mass Supported | Up to 44 kg | Test Standard | 80C heat soak, -30C cold start, 95% RH |
| Actuator Force | 570 N per side | Warranty | 24 Months |
| Brand Name | Liush | Place of Origin | Guangdong, China |
| Model Number | GAC Trumpchi GS5 II | Certification | ISO 9001:2015 |
| High Light | Electric Tailgate Kit ，Auto Open Trunk Kit ，Car Electric Trunk Lift | ||
The GS5 II is a mid-size SUV with a broad rear opening and a heavy glass section. This kit replaces both gas struts with electric actuators and adds a control module that manages opening, closing, obstacle detection and the final soft latch pull.
The module reads three inputs before it acts: gear position, vehicle speed and latch state. A command is only accepted while the selector sits in P and the vehicle is stationary. Once a cycle starts, the module samples actuator current every few milliseconds and cross-checks it against hall position data; if the two disagree, the door stops and reverses. Three beeps sound before each cycle, and a second command during travel stops the door immediately rather than reversing it, so cargo does not fall out.
Actuators are rated 570 N per side, sized for the GS5 II lid mass, with an internal clutch that allows manual movement when the system is switched off. The tube is anodised aluminium and the rod is stainless steel; end caps are sealed to IPX5, and the connector bodies carry single-wire seals rather than booted plugs, which is what usually fails first in humid markets.
| Parameter | GS5 II Value |
|---|---|
| Vehicle | GAC Trumpchi GS5 II (mid-size SUV) |
| Actuator force | 570 N per side |
| Stroke | 355 mm |
| Door mass supported | Up to 44 kg |
| Power | 12V DC, 15A fused |
| Open / close time | 6.5 s / 7 s |
| Water protection | IPX5 |
| Noise | Under 56 dB |
| Cycle test | 41,000 operations |
| Warranty | 24 months |
Units are run through a heat soak at 80°C, a cold start at -30°C, a 95% humidity chamber and a dust exposure cycle before approval. Each batch also has samples cycled to 5,000 operations with a 44 kg simulated lid, and current, noise and end-stop accuracy are logged.
Handed brackets on factory hinge points, harness along the GS5 II hatch loom through the existing grommet, module behind the rear quarter trim. Bracket bolts at 22 Nm. Around two hours for a first car, and the manual includes the self-learn sequence and a wiring diagram per side.
Carton 85 x 24 x 21 cm, one set per carton, four cartons per master. Actuators in EPE sleeves, hardware counted into numbered bags by side, module in a rigid insert. Buyer branding, barcode and market-language labels available on request.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler
Year Established:
2020
Total Annual:
120,000,000-USD 150,000,000
Employee Number:
400~500
Ecer Certification：
Verified Supplier
Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...
Get in touch with us
Leave a Message, we will call you back quickly!