China factories

Chat Now Send Email
China factory - Shenzhen Liush Auto Parts Co.,Ltd

Shenzhen Liush Auto Parts Co.,Ltd

  • China,Shenzhen
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Retrofit Auto Power Tailgate Sedan Electric Tailgate Retrofit Kit Kick Sensor
China Retrofit Auto Power Tailgate Sedan Electric Tailgate Retrofit Kit Kick Sensor

  1. China Retrofit Auto Power Tailgate Sedan Electric Tailgate Retrofit Kit Kick Sensor

Retrofit Auto Power Tailgate Sedan Electric Tailgate Retrofit Kit Kick Sensor

  1. MOQ: 1 Set
  2. Price: US$150-230 / Set
  3. Get Latest Price
Open Close Time 5 s open, 6 s close
OEM/ODM Support from 20 sets
Door Mass Supported Up to 26 kg
Cycle Test 55,000 operations
Packaging Details 1 set per carton 76x21x18 cm, actuators sleeved in EPE, 6 cartons per master carton
Actuator Force 430 N per side
Payment Terms T/T,L/C,Western Union,PayPal
Warranty 24 Months
Model GAC Trumpchi GA6 II Mk2
Power 12V DC, 15A fused
Supply Ability 1300 Sets per Month
Noise Level Under 52 dB
Delivery Time 7-14 Working Days
Stroke 300 mm
Place of Origin Guangdong, China
Brand Name Liush
Certification ISO 9001:2015
Model Number GAC Trumpchi GA6 II Mk2

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

Open Close Time 5 s open, 6 s close OEM/ODM Support from 20 sets
Door Mass Supported Up to 26 kg Cycle Test 55,000 operations
Packaging Details 1 set per carton 76x21x18 cm, actuators sleeved in EPE, 6 cartons per master carton Actuator Force 430 N per side
Payment Terms T/T,L/C,Western Union,PayPal Warranty 24 Months
Model GAC Trumpchi GA6 II Mk2 Power 12V DC, 15A fused
Supply Ability 1300 Sets per Month Noise Level Under 52 dB
Delivery Time 7-14 Working Days Stroke 300 mm
Place of Origin Guangdong, China Brand Name Liush
Certification ISO 9001:2015 Model Number GAC Trumpchi GA6 II Mk2
High Light Automatic Trunk Opener Set ,Auto Tailgate Lift ,Electric Car Trunk Opener

Electric Tailgate Retrofit Kit for the GAC Trumpchi GA6 II (Mk2)

Second-generation GA6 owners get a powered boot with this bolt-on kit. The gas springs come out, two electric actuators go in, and a control module adds key, switch and foot-sensor commands along with a damped final latch pull.

Generation-Specific Fitment

This set is prepared for the GA6 II (Mk2) body rather than the first generation. Hinge brackets follow the Mk2 bolt pattern and the harness is cut to the Mk2 boot loom length, so the install does not need adapter plates or extended wiring. Buyers running the earlier GA6 should ask for the separate reference.

Features

  • Key, cabin switch and boot button control, no extra remote issued.
  • Optional kick sensor bar for opening with a foot sweep.
  • Damped closing stage that pulls the lid into the latch instead of dropping it.
  • Obstacle reverse on hall feedback and current monitoring.
  • One stored opening height, useful in low-ceiling car parks.
  • P-gear interlock and a manual override that stays usable at all times.

Technical Sheet

ParameterGA6 II Mk2
Actuator force430 N per side
Stroke300 mm
Door mass supportedUp to 26 kg
Supply12V DC, 15A fused
Open / close time5 s / 6 s
Water protectionIPX5
NoiseUnder 52 dB
Cycle test55,000 operations
Warranty24 months

Workshop Notes

Rear parcel shelf trim and the boot side panels clip out with plastic tools. Factory ball studs are reused, bracket bolts are torqued to 22 Nm, and the module is mounted on the inner quarter panel clear of the drain channel. A first-time installation runs about 100 minutes; the self-learn sequence is described step by step in the printed manual.

Logistics

One set per carton, 76 x 21 x 18 cm, actuators sleeved in EPE and hardware bagged by side. Six cartons per master carton; pallet loading on request. We can print buyer part numbers and barcodes on the carton, and neutral packaging is available for resellers.

Quality Control

Every actuator is cycled with a simulated 26 kg lid load before packing. Modules are checked against the Mk2 firmware, and a sample from each batch is run through a 500-cycle stress test. Faulty units inside the warranty window are replaced against photos of the failure.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler

  • Year Established:

    2020

  • Total Annual:

    120,000,000-USD 150,000,000

  • Employee Number:

    400~500

  • Ecer Certification:

    Verified Supplier

Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...

+ Read More

Get in touch with us

  • Reach Us
  • Shenzhen Liush Auto Parts Co.,Ltd
  • Room 606, A Building, Convention and Exhibition Bay Zhonggang Plaza, Fengtang Blvd, Fuhai Street, Bao'an District, Shenzhen, 518103, China
  • https://www.liushtec.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement