China factories

Chat Now Send Email
China factory - Shenzhen Liush Auto Parts Co.,Ltd

Shenzhen Liush Auto Parts Co.,Ltd

  • China,Shenzhen
  • Verified Supplier
  1. Home
  2. Products
  3. About Us
  4. Contact Us

Leave a Message

we will call you back quickly!

Submit Requirement
China Power Electric Tailgate Lift Aftermarket Power Tailgate Retrofit Kick Sensor
China Power Electric Tailgate Lift Aftermarket Power Tailgate Retrofit Kick Sensor

  1. China Power Electric Tailgate Lift Aftermarket Power Tailgate Retrofit Kick Sensor

Power Electric Tailgate Lift Aftermarket Power Tailgate Retrofit Kick Sensor

  1. MOQ: 1 Set
  2. Price: US$150-230 / Set
  3. Get Latest Price
OEM/ODM Support from 10 sets
Supply Ability 1200 Sets per Month
Actuator Force 650 N per side
Warranty 24 Months
Water Protection IPX5
Delivery Time 9-16 Working Days
Door Mass Supported Up to 45 kg
Cycle Test 40,000 operations
Model GAC Trumpchi GS8
Payment Terms T/T,L/C at sight
Packaging Details 1 set per carton 88x26x24 cm for the long struts, 2 cartons per master carton
Voltage 12V DC, 20A fused
Noise Level Under 58 dB
Stroke 380 mm
Model Number GAC Trumpchi GS8
Place of Origin Guangdong, China
Certification ISO 9001:2015
Brand Name Liush

View Detail Information

Inquiry by Email Get Latest Price
Chat online Now Ask for best deal
  1. Product Details
  2. Company Details

Product Specification

OEM/ODM Support from 10 sets Supply Ability 1200 Sets per Month
Actuator Force 650 N per side Warranty 24 Months
Water Protection IPX5 Delivery Time 9-16 Working Days
Door Mass Supported Up to 45 kg Cycle Test 40,000 operations
Model GAC Trumpchi GS8 Payment Terms T/T,L/C at sight
Packaging Details 1 set per carton 88x26x24 cm for the long struts, 2 cartons per master carton Voltage 12V DC, 20A fused
Noise Level Under 58 dB Stroke 380 mm
Model Number GAC Trumpchi GS8 Place of Origin Guangdong, China
Certification ISO 9001:2015 Brand Name Liush
High Light Electric Trunk Lift ,Automatic Trunk Opener Set ,Auto Tailgate System

Electric Tailgate Lift Kit for the GAC Trumpchi GS8

The GS8 carries a large, heavy rear door. This kit gives it electric drive with actuators rated at 650 N per side, so the lid opens and closes on command even when loaded with a roof rack and wet weather seals.

Overview

Two powered struts replace the factory gas springs. A control module mounted behind the rear quarter trim handles the logic, reading the original remote, the cabin switch and the tailgate handle. The harness ends in moulded plugs that mate with the GS8 loom, so no wiring is cut and the factory latch, central locking and alarm keep full control of the lock state.

Highlights

  • 650 N actuators sized for the GS8 door mass, with a slow final approach before the latch.
  • Aftermarket retrofit brackets that reuse the factory hinge bolt pattern on both sides.
  • Optional kick sensor bar for hands-free opening when carrying luggage or shopping.
  • Reverse on contact within a fraction of a second, driven by hall position feedback.
  • Three warning beeps before every movement, plus a manual override that always stays active.
  • Opening height can be stored, which helps in older garages and low-roof car parks.

Technical Parameters

ItemGS8 Specification
VehicleGAC Trumpchi GS8
Actuator force650 N per side
Stroke380 mm
Supply12V DC, 20A fused
Door mass supportedUp to 45 kg
Travel time8 s open, 7 s close
Water protectionIPX5
NoiseUnder 58 dB
Cycle test40,000 operations
Warranty24 months

Installation Requirements

A two-post lift is not needed, but the rear headliner trim does have to come down to route the harness. Expect two to three hours for a technician who has done the job before. Torque values, bracket orientation and the self-learn sequence are printed in the manual, and a wiring diagram is included for each side.

Warranty and Support

Each set is cycled on a rig with a simulated door mass before packing. If a unit fails within the warranty window we ship a replacement actuator or module against photos of the fault, and our engineers will walk a workshop through diagnostics by video call when needed.

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer,Distributor/Wholesaler

  • Year Established:

    2020

  • Total Annual:

    120,000,000-USD 150,000,000

  • Employee Number:

    400~500

  • Ecer Certification:

    Verified Supplier

Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig... Your Trusted Partner in Automotive Intelligent Upgrade Accessories ⚙️ Independent R&D ???? Standardized Production ???? Global Sales ????️ One-Stop After-Sales Who We Are Shenzhen Liush Auto Parts Co., Ltd. is a subsidiary of Liush Group, founded in 2020. We own independent export rig...

+ Read More

Get in touch with us

  • Reach Us
  • Shenzhen Liush Auto Parts Co.,Ltd
  • Room 606, A Building, Convention and Exhibition Bay Zhonggang Plaza, Fengtang Blvd, Fuhai Street, Bao'an District, Shenzhen, 518103, China
  • https://www.liushtec.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement