Shenzhen LLH Electrical Co., Ltd.
| Payment Terms | L/C,D/A,D/P,T/T,Western Union |
| Supply Ability | 5000-10000 pieces/mouth |
| Delivery Time | 7-15 days |
| Packaging Details | box |
| Standards | IEC 61643.21 |
| Nominal Operating Voltage (Un) | 5Vdc/ 48Vdc |
| Shock Rating (X-X C2/C1) | 4kV/2kA/ 1kV/0.5kA |
| Voltage Protection Level (X-X @C2/C1) | ≤25V |
| Maximum Transfer Rate (Vs) | 1G bit/s |
| Number of Protected Ports | 8 Line |
| Brand Name | LLH |
| Model Number | LS-1000M-8 |
| Place of Origin | Guangdong Province.China |
View Detail Information
Explore similar products
Gigabit Poe Surge Protector RJ45 10Gbps POE 5V 8V 48V 60V Communication Network
Signal Gigabit Ethernet Surge Protector 1000M 24V POE Rack Type 1G Network
Network Lan Cable Surge Protector RJ45 10G SPD 5V 60V Signal Lightning
Lightning 10G Gigabit Ethernet Surge Protector Poe SPD Cat6A 4kV Device
Product Specification
| Payment Terms | L/C,D/A,D/P,T/T,Western Union | Supply Ability | 5000-10000 pieces/mouth |
| Delivery Time | 7-15 days | Packaging Details | box |
| Standards | IEC 61643.21 | Nominal Operating Voltage (Un) | 5Vdc/ 48Vdc |
| Shock Rating (X-X C2/C1) | 4kV/2kA/ 1kV/0.5kA | Voltage Protection Level (X-X @C2/C1) | ≤25V |
| Maximum Transfer Rate (Vs) | 1G bit/s | Number of Protected Ports | 8 Line |
| Brand Name | LLH | Model Number | LS-1000M-8 |
| Place of Origin | Guangdong Province.China | ||
| High Light | Ethernet Lightning Surge Protector 1G ，Wall Mount POE Surge Protector ，Office Ethernet Lightning Surge Protector | ||
| Product Features |
|
● Integrated multi-channel independent protection circuit, small mutual interference.
|
|
● Unique anti-interference wiring design, meet 1G network communication.
|
|
● Single-stage high-energy device parallel protection circuit design, low residual voltage.
|
|
● Cat-6 type line lightning protectors installed in LPZ 2-3 and subsequent surge protection zones and applied to 1000/1000 BASE-T 802.3 computer network information systems.
|
Product Specification
|
Standards
|
IEC 61643.21
|
|
|
Models
|
LS-1000M-8
|
LS-1000M/POE-8
|
|
Parameter
|
||
|
Nominal operating voltage Un
|
5Vdc
|
48Vdc
|
|
Maximum continuous operating voltage Uc
|
6.8Vdc
|
60Vdc
|
|
X-X Shock rating C2/C1
|
4kV/2kA
|
1kV/0.5kA
|
|
X-C Shock rating C2
|
4kV/2kA
|
4kV/2kA
|
|
X-X,X-C Shock rating B2
|
4kV(10/700μs)
|
4kV(10/700μs)
|
|
X-X Up@C2/C1
|
≤25V
|
≤25V
|
|
X-C Up@C2
|
≤500V
|
≤500V
|
|
X-X Up@B2
|
≤20V
|
≤15V
|
|
X-C Up@B2
|
≤300V
|
≤300V
|
|
Response time tA
|
1ns
|
1ns
|
|
Maximum transfer rate Vs
|
100M bit/s
|
100M bit/s
|
|
Load current
|
1A
|
1A
|
|
Number of protected ports
|
8Line
|
|
|
Protective Line
|
1-2,3-6,4-5,7-8
|
|
|
Failure indication
|
Signal interrupted
|
|
|
Installation mode
|
Flat/wall mounting
|
|
Mounting hole spacing
|
190mmx66mm
|
|
Product dimensions
|
204mmx117mmx48mm
|
|
Shell material
|
Cold-rolled steel sheet painted black
|
|
Installation location
|
Indoor
|
|
Shell protection rating
|
IP20
|
|
Temperature range
|
-40℃…+80℃
|
|
Humidity range
|
Relative humidity≤95%
|
Notices
● Use the provided mounting holes (190mmx66mm) for secure wall installation.
● For POE models, avoid exceeding the maximum continuous operating voltage (60Vdc).
● Use Cat-5e or higher grade cables to ensure 1Gbit/s transmission speed.
● Properly ground the SPD to guarantee surge diversion; ground resistance ≤4Ω is recommended.
● Regularly inspect the ports for loose connections or physical damage.
● Failure is indicated by signal interruption; replace the product if multiple ports fail simultaneously.
FAQ
Q1: How many ports does this product have?
A1: It has 8 protected ports, suitable for small-scale network deployments.
Q2: What is the installation method?
A2: It supports flat or wall mounting with mounting hole spacing of 190mmx66mm.
Q3: Is it compatible with POE devices?
A3: The LS-1000M/POE-8 model supports 48Vdc POE power supply, while LS-1000M-8 is for non-POE network lines.
Q4: What is the housing material and size?
A4: The housing is cold-rolled steel sheet (black painted) with dimensions 204mmx117mmx48mm.
Q5: Can it be used for 100M networks?
A5: Yes, it is backward compatible with 100M BASE-T systems, providing universal surge protection.
Company Details
Business Type:
Manufacturer
Year Established:
2018
Total Annual:
1000000-10000000
Employee Number:
20~100
Ecer Certification：
Verified Supplier
Shenzhen Leilihai Electric Co., Ltd We are a high-tech enterprise that integrates the research and development, manufacturing, sales, and installation services of lightning protection devices and lightning protection system supporting products. The company has successively passed the German TUV cer... Shenzhen Leilihai Electric Co., Ltd We are a high-tech enterprise that integrates the research and development, manufacturing, sales, and installation services of lightning protection devices and lightning protection system supporting products. The company has successively passed the German TUV cer...
Get in touch with us
Leave a Message, we will call you back quickly!