Guangzhou Tianyuan Silicone Machine Technology Co., Ltd.
| Supply Ability | 10 sets / month |
| Delivery Time | 60 work days |
| Packaging Details | Plywood box |
| Horizontal Injection Molding Machine | High Precision Horizontal Liquid Silicone Injection Moulding Machine 130T Clamping Force |
| Clamping force | 130T |
| Shot volume | 165g |
| Opening Stroke | 200-700mm |
| Injection Rate | 30g/s |
| Injection Pressure | 700kg/c㎡ |
| Ejection Force | 4.3T |
| Motor Power | 12.1KW |
| Brand Name | TYM |
| Model Number | TYM-W4545 |
| Certification | CE, ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Horizontal Liquid Silicone Injection Molding Machine For Baby Bottle
Energy Efficiency Horizontal Injection Molding Machine For Baby Wide Neck Bottle
Horizontal Liquid Silicone Injection Moulding Machine Injection Pressure 700kg
High Efficiency Horizontal Injection Moulding Machine Opening Stroke 200-700mm
Product Specification
| Supply Ability | 10 sets / month | Delivery Time | 60 work days |
| Packaging Details | Plywood box | Horizontal Injection Molding Machine | High Precision Horizontal Liquid Silicone Injection Moulding Machine 130T Clamping Force |
| Clamping force | 130T | Shot volume | 165g |
| Opening Stroke | 200-700mm | Injection Rate | 30g/s |
| Injection Pressure | 700kg/c㎡ | Ejection Force | 4.3T |
| Motor Power | 12.1KW | Brand Name | TYM |
| Model Number | TYM-W4545 | Certification | CE, ISO |
| Place of Origin | CHINA | ||
| High Light | horizontal molding machine ，o ring making machine | ||
High Precision Horizontal Liquid Silicone Injection Moulding Machine 130T Clamping Force
There are 4 problems affecting demoulding
1. Mold design structure, material, polishing, demoulding slope, mold surface treatment;
2. The injection pressure is too high, whether the ejector pin arrangement is reasonable, and the ejection is unbalanced;
3. Different liquid silica gel materials lead to fluidity and lubrication effect;
4. Parameter setting and injection amount in production.
What good demoulding of silica gel mold? Let's make an analysis and make the following seven solutions to the four major problems:
1. Special silicone release agent can be added properly when demoulding;
2. The requirement for the smooth surface of silica gel products is not high. Detergent can be selected, which is cheap and easy to use;
3. As far as possible, the addition silicone rubber is selected as the silica gel material, and the surface has no active group, so it can be demoulded easily;
4. Organic release agent is applied on the surface of the mold;
5. The molding mould of silica gel products should be washed before production;
6. The surface of the mould is plated;
7. Select the appropriate liquid silicone injection molding machine, set the proportion parameters accurately.
Horizontal 130T direct pressure LSR injection molding machine
| Injection Unit | |||||
| Shot Volume | 165g (can be adjusted) | ||||
| Injection Rate | 30 g/s | ||||
| Injection Pressure | 700kg/cm³ | ||||
| Clamping Unit | |||||
| Clamping Force | 130 T | ||||
| Opening Stroke | 200-700 mm | ||||
| Tie-Bars Pace | 450*450 mm | ||||
| Ejection Force | 4.3 T | ||||
| Ejection Stroke | 150 mm | ||||
| Others | |||||
| Motor Power | 12.1 KW | ||||
| Pump Pressure | 21 Mpa | ||||
| Machine Weight | 4 T | ||||
| Machine Dimension | 4.1*1.6*2.0 M | ||||
OUR SERVICES
Pre-sale service
According to the customer’s investment budget, plant planning and other forms of pre-sales services to ensure customer's planning is reasonable, standardized and cost-saving, will provide matched mold and select suitable machine according to customer’s requirement.
On-purchase service
Enable to be familiar with the operation and maintenance of the TYM's machine.
1) Installation of LSR machine and new machine debugging service.
2) Machine operator training.
3) Training of technicians.
After-sales service
1) Free training for the operation and maintenance independently.
2) Help to solve and reply technical problem and question timely, TYM will arrange professional engineer for the instruction and will provide the technical guidance for free.
3) TYM will give priority to customer when the system on the LSR machine need to be upgraded.
Company Details
Business Type:
Manufacturer
Year Established:
2002
Total Annual:
5 Million-10 Million
Employee Number:
100~120
Ecer Certification：
Active Member
Guangzhou Tianyuan Silicone Machine Technology Co., Ltd. is established in 2002, which specializes in designing and manufacturing the LSR automatic injection molding machine as well as the LSR mold, we mastered the core technology, the quality is excellent! Our production technology is in the leadin... Guangzhou Tianyuan Silicone Machine Technology Co., Ltd. is established in 2002, which specializes in designing and manufacturing the LSR automatic injection molding machine as well as the LSR mold, we mastered the core technology, the quality is excellent! Our production technology is in the leadin...
Get in touch with us
Leave a Message, we will call you back quickly!