Guchi Intelligent Equipment (Jiangsu) Co., Ltd.
| Packaging Details | Different packaging methods are adopted according to different modes of transport. |
| Payment Terms | Western Union, MoneyGram, T/T |
| CNC System | FANUC |
| Rapid Traverse Speed | 24000mm/min |
| Cutting Feed Rate | 1-10000mm/min |
| 3-Axis Drive Power | 3.0kw |
| 3-Axis Drive Torque | 36N.m |
| Worktable Size | 1000×1000mm |
| Brand Name | Guss |
| Model Number | MHE-50 |
| Place of Origin | China |
View Detail Information
Explore similar products
MHE-50 Robust Material Handling Equipment Optimized for Heavy Duty Industrial
MHE-50 Material Handling Solution Optimized for Handling Heavy Loads and
MHE-50 versatile material handling system engineered to improve workflow and
MHE-50 CNC 5 Axis Machining Center Heavy Duty Material Handling Equipment
Product Specification
| Packaging Details | Different packaging methods are adopted according to different modes of transport. | Payment Terms | Western Union, MoneyGram, T/T |
| CNC System | FANUC | Rapid Traverse Speed | 24000mm/min |
| Cutting Feed Rate | 1-10000mm/min | 3-Axis Drive Power | 3.0kw |
| 3-Axis Drive Torque | 36N.m | Worktable Size | 1000×1000mm |
| Brand Name | Guss | Model Number | MHE-50 |
| Place of Origin | China | ||
| High Light | High Responsiveness Horizontal Machining Centers ，High Precision Horizontal Machining Centers ，High Speed cnc horizontal machining | ||
| Item | Unit | MHE-50 | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Traverse Speed | - | 24000/24000/24000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 22.0/22.0/22.0 [Note①] | |
| Worktable | T-Slot Size/Threaded Hole Specification | - | 5-18-100/M16×20 Thread |
| Worktable Size | mm | 500×500 | |
| Worktable Indexing | ° | 1[Note②] | |
| Worktable Speed | r/min | 25 | |
| Max Worktable Rotation Diameter | mm | 800 | |
| Max Worktable Load | Kg | 400 | |
| Stroke | 3-Axis Stroke | mm | 800×550×550 |
| Distance from Spindle Center to Worktable Surface | mm | 0-550 | |
| Distance from Spindle Nose to Worktable Center | mm | 120-670 | |
| Spindle | Spindle Power | Kw | 11-15 |
| Max Spindle Speed | rpm | 10000(Belt)/12000(Direct Drive) | |
| Spindle Taper Hole | - | BT40 [Note③] | |
| Transmission | Screw Diameter/Pitch | mm | Φ40D12/Φ40D12/Φ40D12 |
| Linear Rail Brand/Type/Width | - | PMI Roller 45mm/45mm/45mm [Note④] | |
| Guide Rail Qty/Slider Qty | Pcs | 2-4/2-6/2-6 | |
| Tool Magazine | Tool Capacity | Pcs | 24 |
| BT/BBT Tightening Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ80(Full)/Φ150(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/Kg | 300/8 | |
| Tool Change Time | s | 1.3 | |
| Partial Configuration | Automatic Chip Removal | - | Chain Conveyor |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Stroke) | - | 0.008mm/0.008mm/0.008mm/10sec |
| Repeat Positioning Accuracy (Full Stroke) | - | 0.005mm/0.005mm/0.005mm/2sec | |
| Others | Air Flow/Pressure | - | Flow 150L(min)/Pressure(6bar) |
| Total Power | Kw | 25 | |
| Machine Weight | Kg | 7500 | |
| Machine Overall Size (L×W×H) | mm | 2400×2400×2600 | |
Mechanical tool magazine, rear water chip conveyor, spindle oil cooler, water gun, air gun, spindle curtain, spindle ring, centralized lubrication, air treatment, oil-water separator, heat exchanger
Mitsubishi/Sinumerik system, hollow spindle, chain chip conveyor, grease lubrication, electrical cabinet air conditioning, 4th/5th axis, column heightening, internal tool cooling, fixtures, clamps
※ Product appearance and configuration are subject to improvement with technological development (not lower than current technical requirements), and no separate notification will be given. The actual purchase shall be subject to the technical agreement.
Note①: 3-axis power and torque are based on FANUC; for details of Mitsubishi/Sinumerik systems, please consult the supplier's customer manager.
Note②: Optional 0.01° indexing table.
Note③: Optional T50 spindle.
Note④: If out of stock, HIWIN/Rexroth/THK of the same specification will be used as substitutes, and no separate notification will be given.
Company Details
Business Type:
Manufacturer
Year Established:
2022
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
The company has a wide range of products, high-speed vertical machining centers, horizontal machining centers, gantry machining centers, automatic production line, New energy and other products are exported to domestic and overseas, deeply serving the mitary industry, 5G communication, aerospace, r... The company has a wide range of products, high-speed vertical machining centers, horizontal machining centers, gantry machining centers, automatic production line, New energy and other products are exported to domestic and overseas, deeply serving the mitary industry, 5G communication, aerospace, r...
Get in touch with us
Leave a Message, we will call you back quickly!