Guchi Intelligent Equipment (Jiangsu) Co., Ltd.
| CNC System | FANUC |
| Rapid Speed | 20000/20000/12000mm/min |
| Cutting Feed Speed | 1-10000mm/min |
| 3-Axis Rated Power | 3.0/3.0/3.0kw |
| 3-Axis Rated Torque | 27.0/27.0/27.0N.m |
| 3-Axis Travel | 1300×700×700mm |
| Packaging Details | Different packaging methods are adopted according to different modes of transport. |
| Payment Terms | Western Union, MoneyGram, T/T |
| Brand Name | Guss |
| Model Number | VMC-1480HL |
| Place of Origin | China |
View Detail Information
Explore similar products
Product Specification
| CNC System | FANUC | Rapid Speed | 20000/20000/12000mm/min |
| Cutting Feed Speed | 1-10000mm/min | 3-Axis Rated Power | 3.0/3.0/3.0kw |
| 3-Axis Rated Torque | 27.0/27.0/27.0N.m | 3-Axis Travel | 1300×700×700mm |
| Packaging Details | Different packaging methods are adopted according to different modes of transport. | Payment Terms | Western Union, MoneyGram, T/T |
| Brand Name | Guss | Model Number | VMC-1480HL |
| Place of Origin | China | ||
| High Light | Industrial Vertical Machining Centers ，High Precision Vertical Machining Centers ，High Precision vmc cnc | ||
Product Features
Technical Specifications
| Item | Unit | VMC-1480HL | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 20000/20000/20000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 27.0/27.0/27.0 [Note①] | |
| Worktable | T-Slot Dimensions | - | 5-18-125 |
| Worktable Dimensions | mm | 1500*800 | |
| Max Worktable Load | Kg | 1300 | |
| Travel | 3-Axis Travel | mm | 1400*800*700 |
| Distance from Spindle Nose to Worktable | mm | 150-850 | |
| Spindle | Spindle Power | Kw | 15-18.5 |
| Max Spindle Speed | rpm | 6000(Belt)/8000(Belt)/10000(Direct Drive) | |
| Spindle Taper | - | BT50 | |
| Transmission | Screw Diameter/Pitch | mm | Φ50D10/Φ50D10/Φ50D10 |
| Linear Rail Brand/Type/Width | - | PMI Roller 45mm/Roller 45mm/Roller 45mm [Note②,③] | |
| Number of Rails/Sliders | Pcs | 2-6/4-8/2-6 | |
| Tool Magazine | Tool Magazine Capacity | Pcs | 24 [Note④] |
| BT/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ110(Full Magazine)/Φ210(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 350/15 | |
| Tool Change Time | s | 2.2 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flushing |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Travel) | mm | 0.01 |
| Repeat Positioning Accuracy (Full Travel) | mm | 0.008 | |
| Others | Air Supply Flow/Pressure | - | Flow 150(L/min)/Pressure(6Bar) |
| Total Power | Kw | 35 | |
| Machine Weight | Kg | 11500 | |
| Machine Overall Dimensions (L*W*H) | mm | 3900*2900*3000 [Note⑤] | |
Mechanical manual tool magazine,Rear-flush chip removal,Spindle oil cooler,Water gun,Air gun,Spindle air curtain,Spindle ring spray,Centralized lubrication,Air source treatment,Oil-water separation,Heat exchanger,Nitrogen balance
Mitsubishi/Syntec system,Hollow screw,Chain-type chip removal,Grease lubrication,Electrical cabinet air conditioner,4-axis,5-axis,Column heightening,Tool internal,coolingFixtures,Clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note ③: The width of X/Y/Z-axis linear rails can be optionally 55mm.
Note ④: Optional 30-tool capacity for the tool magazine.
Note ⑤: This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.
Company Details
Business Type:
Manufacturer
Year Established:
2022
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
The company has a wide range of products, high-speed vertical machining centers, horizontal machining centers, gantry machining centers, automatic production line, New energy and other products are exported to domestic and overseas, deeply serving the mitary industry, 5G communication, aerospace, r... The company has a wide range of products, high-speed vertical machining centers, horizontal machining centers, gantry machining centers, automatic production line, New energy and other products are exported to domestic and overseas, deeply serving the mitary industry, 5G communication, aerospace, r...
Get in touch with us
Leave a Message, we will call you back quickly!