Guchi Intelligent Equipment (Jiangsu) Co., Ltd.
| Packaging Details | Different packaging methods are adopted according to different modes of transport. |
| Payment Terms | Western Union,MoneyGram,T/T |
| CNC System | FANUC |
| Rapid Speed | 20000/20000/12000mm/min |
| Cutting Feed Speed | 1-10000mm/min |
| 3-Axis Rated Power | 3.0/3.0/3.0kw |
| 3-Axis Rated Torque | 27.0/27.0/27.0N.m |
| 3-Axis Travel | 1300×700×700mm |
| Brand Name | Guss |
| Model Number | VMC-855HL |
| Place of Origin | China |
View Detail Information
Explore similar products
600 Mm Z Axis Travel High Speed VMC Machine Providing 850 X 550 Mm Table Size
800 Mm X-Axis Travel VMC-855HL CNC Machine Featuring 000 RPM Spindle Speed and
Tool Change Time 2.8 Seconds 3 Axis VMC Machine Integrated with Fanuc 0i MF
800 Mm X Axis Travel VMC 855HL Vertical Machining Center Offering 15 KW Spindle
Product Specification
| Packaging Details | Different packaging methods are adopted according to different modes of transport. | Payment Terms | Western Union,MoneyGram,T/T |
| CNC System | FANUC | Rapid Speed | 20000/20000/12000mm/min |
| Cutting Feed Speed | 1-10000mm/min | 3-Axis Rated Power | 3.0/3.0/3.0kw |
| 3-Axis Rated Torque | 27.0/27.0/27.0N.m | 3-Axis Travel | 1300×700×700mm |
| Brand Name | Guss | Model Number | VMC-855HL |
| Place of Origin | China | ||
| High Light | 36000mm/Min vmc cnc machine ，3 Axis vmc cnc machine ，3 Axis vmc machining | ||
| Item | Unit | VMC-855HL | |
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 36000/36000/36000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 20.0/20.0/20.0 [Note①] | |
| Worktable | T-Slot Dimensions | - | 5-18-90 |
| Worktable Dimensions | mm | 1000*550 | |
| Max Worktable Load | Kg | 600 | |
| Travel | 3-Axis Travel | mm | 800*550*550 |
| Distance from Spindle Nose to Worktable | mm | 120-670 | |
| Spindle | Spindle Power | Kw | 7.5-11 |
| Max Spindle Speed | rpm | 10000(Belt)/12000(Direct Drive)/15000(Direct Drive) | |
| Spindle Taper | - | BT40 [Note②] | |
| Transmission | Screw Diameter/Pitch | mm | Φ40D16/Φ40D16/Φ40D12 |
| Linear Rail Brand/Type/Width | - | PMI Roller 35mm/Roller 45mm/Roller 45mm [Note③] | |
| Number of Rails/Sliders | Pcs | 2-4/2-4/2-6 | |
| Tool Magazine | Tool Magazine Capacity | Pcs | 24 [Note④] |
| BT/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ80(Full Magazine)/Φ150(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 300/8 | |
| Tool Change Time | s | 1.3 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flushing |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Travel) | mm | 0.008 |
| Repeat Positioning Accuracy (Full Travel) | mm | 0.005 | |
| Others | Air Supply Flow/Pressure | - | Flow 150(L/min)/Pressure 6Bar |
| Total Power | Kw | 20 | |
| Machine Weight | Kg | 5500 | |
| Machine Overall Dimensions (L*W*H) | mm | 2600*2350*2800 [Note⑤] | |
Standard Configuration:
Umbrella-shaped servo tool magazine, rear-flush chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger
Optional Configuration:
Mitsubishi/Syntec system, hollow screw, chain-type chip removal, grease lubrication, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps
※ The product’s appearance and configuration will be updated with technological development (but will not be lower than current technical requirements). No separate notification will be given; specific details shall be subject to the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: Optional BT50-155 spindle;
Note ③: In case of stock shortage, equivalent specifications (e.g., HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given;
Note ④: Optional 30-tool capacity for the tool magazine;
Note ⑤:This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.
Company Details
Business Type:
Manufacturer
Year Established:
2022
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
The company has a wide range of products, high-speed vertical machining centers, horizontal machining centers, gantry machining centers, automatic production line, New energy and other products are exported to domestic and overseas, deeply serving the mitary industry, 5G communication, aerospace, r... The company has a wide range of products, high-speed vertical machining centers, horizontal machining centers, gantry machining centers, automatic production line, New energy and other products are exported to domestic and overseas, deeply serving the mitary industry, 5G communication, aerospace, r...
Get in touch with us
Leave a Message, we will call you back quickly!