Guchi Intelligent Equipment (Jiangsu) Co., Ltd.
| Machine Weight | 7500 Kg |
| Spindle Motor Power | 15 KW |
| Tool Change Time | 2.8 Seconds |
| Supply Ability | 10 SETS/MONTH |
| Y-Axis Travel | 1000 MM |
| Machine Dimensions (L*W*H) | 4100×2800×2800MM |
| Z-Axis Travel | 600 Mm |
| Payment Terms | T/T |
| Control System | Fanuc 0i-MF |
| Delivery Time | ABOUT A MONTH |
| Tool Magazine Capacity | 24 Tools |
| Brand Name | GUSS |
| Model Number | VMC-1066HD |
| Certification | CE |
| Place of Origin | JIANGSU |
View Detail Information
Explore similar products
Product Specification
| Machine Weight | 7500 Kg | Spindle Motor Power | 15 KW |
| Tool Change Time | 2.8 Seconds | Supply Ability | 10 SETS/MONTH |
| Y-Axis Travel | 1000 MM | Machine Dimensions (L*W*H) | 4100×2800×2800MM |
| Z-Axis Travel | 600 Mm | Payment Terms | T/T |
| Control System | Fanuc 0i-MF | Delivery Time | ABOUT A MONTH |
| Tool Magazine Capacity | 24 Tools | Brand Name | GUSS |
| Model Number | VMC-1066HD | Certification | CE |
| Place of Origin | JIANGSU | ||
| High Light | vertical machining center fast axis movement ，high precision milling machine ，VMC-1066HD modern production line | ||
| Item | Unit | VMC-1066HD | |
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 24000/24000/16000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 20.0/20.0/27.0 [Note①] | |
| Worktable | T-Slot Dimensions | - | 5-18-105 |
| Worktable Dimensions | mm | 1200*600 | |
| Max Worktable Load | Kg | 1200 | |
| Travel | 3-Axis Travel | mm | 1000*600*600 |
| Distance from Spindle Nose to Worktable | mm | 120-720 | |
| Spindle | Spindle Power | Kw | 11-15 (Wide Range) |
| Spindle Rated Torque | N.m | 420(Low Speed Gear)/105(High Speed Gear) | |
| Spindle Gear Ratio | - | 1:4 / 1:1 | |
| Max Spindle Speed | rpm | 2500(1:4) / 8000(1:1) | |
| Spindle Taper | - | BT50 | |
| Transmission | Screw Diameter/Pitch | mm | Φ40D12/Φ40D12/Φ40D12 |
| Linear Rail Brand/Type/Width | - | PMI Roller 45mm/Roller 45mm/Rectangular rail [Note②] | |
| Number of Rails/Sliders | Pcs | 2-6/2-4 /Rectangular rail | |
| Tool Magazine | Tool Magazine Capacity | Pcs | 24 [Note③] |
| BT/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ110(Full Magazine)/Φ210(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 350/15 | |
| Tool Change Time | s | 2.2 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flushing |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Travel) | mm | 0.008 |
| Repeat Positioning Accuracy (Full Travel) | mm | 0.005 | |
| Others | Air Supply Flow/Pressure | - | Flow 150(L/min)/Pressure(6Bar) |
| Total Power | Kw | 30 | |
| Machine Weight | Kg | 7500 | |
| Machine Overall Dimensions (L*W*H) | mm | 4100*2800*2800 | |
Standard Configuration:
Mechanical manual tool magazine, chain-type chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger, nitrogen balance (for VMC-1066 and above models)
Optional Configuration:
Mitsubishi/Syntec system, hollow screw, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note ③: Optional 30-tool capacity for the tool magazine.
A1: The VMC-1066HD is branded as GUSS and the model number is VMC-1066.
A2: The VMC-1066HL is made in Jiangsu, China.
A3: Yes, the VMC-1066HD is CE certified.
A4: The minimum order quantity for the VMC-1066HD is 1 set.
A5: The payment terms are T/T (telegraphic transfer), and the delivery time is about two month.
Company Details
Business Type:
Manufacturer
Year Established:
2022
Total Annual:
>1000000
Employee Number:
>100
Ecer Certification：
Verified Supplier
The company has a wide range of products, high-speed vertical machining centers, horizontal machining centers, gantry machining centers, automatic production line, New energy and other products are exported to domestic and overseas, deeply serving the mitary industry, 5G communication, aerospace, r... The company has a wide range of products, high-speed vertical machining centers, horizontal machining centers, gantry machining centers, automatic production line, New energy and other products are exported to domestic and overseas, deeply serving the mitary industry, 5G communication, aerospace, r...
Get in touch with us
Leave a Message, we will call you back quickly!