Guchi Intelligent Equipment (Jiangsu) Co., Ltd.
| Rapid Speed | 48000/48000/48000mm/min |
| 3-Axis Rated Torque | 8.0/12.0/12.0N.m |
| CNC System | FANUC |
| Payment Terms | Western Union,MoneyGram,T/T |
| Packaging Details | Different packaging methods are adopted according to different modes of transport. |
| Worktable Size | 800×420mm |
| Cutting Feed Rate | 1-10000mm/min |
| 3-Axis Rated Power | 2.5/2.7/2.7kw |
| Model Number | TAP-640 |
| Place of Origin | China |
| Brand Name | Guss |
View Detail Information
Explore similar products
TAP-640 Drilling And Tapping Center 48000mm/Min Rapid Speed
TAP640 Drilling and Tapping Machining Center with 48000mm/min Rapid Speed,
TAP-640 Drilling and Tapping Center with 48000mm/min Rapid Speed, FANUC CNC
TAP-640 Vertical Machining Center with High Speed 48000mm/min, Fanuc CNC Control
Product Specification
| Rapid Speed | 48000/48000/48000mm/min | 3-Axis Rated Torque | 8.0/12.0/12.0N.m |
| CNC System | FANUC | Payment Terms | Western Union,MoneyGram,T/T |
| Packaging Details | Different packaging methods are adopted according to different modes of transport. | Worktable Size | 800×420mm |
| Cutting Feed Rate | 1-10000mm/min | 3-Axis Rated Power | 2.5/2.7/2.7kw |
| Model Number | TAP-640 | Place of Origin | China |
| Brand Name | Guss | ||
| High Light | FANUC CNC drilling tapping center ，high-speed 20000rpm spindle machine ，TAP-640 CNC machining center | ||
TAP-640 Drilling and Tapping Machining Center
Product Features
| Item | Unit | TAP-640 | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 48000/48000/48000 | |
| Cutting Feed Rate | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 2.5/2.7/2.7 [Note①] | |
| 3-Axis Rated Torque | N.m | 8.0/12.0/12.0 [Note①] | |
| Worktable | T-Slot Size | - | 3-14-125 |
| Worktable Size | mm | 700×420 | |
| Max Worktable Load | Kg | 300 | |
| Stroke | 3-Axis Stroke | mm | 600×400×350 |
| Spindle Nose to Worktable Distance | mm | 130-460 | |
| Spindle | Spindle Power | Kw | 3.7-5.5 |
| Max Spindle Speed | rpm | 20000 | |
| Spindle Taper | - | BT30 | |
| Transmission | Screw Diameter/Pitch | mm | Φ28D16/Φ28D16/Φ32D16 |
| Linear Rail Brand/Type/Width | - | PMI Ball 30mm/PMI Ball 30mm/PMI Roller 30mm [Note②] | |
| Guideway Quantity/Slider Quantity | Pcs | 2-4/2-4/2-4 | |
| Tool Magazine | Tool Capacity (Pocket) | Pcs | 21 |
| BT1/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ60(Full Magazine)/Φ80(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 200/2 | |
| Tool Change Time (Adjacent/Distant) | s | 0.35/1.3 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flush |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Stroke) | mm | 0.008 |
| Repeat Positioning Accuracy (Full Stroke) | mm | 0.005 | |
| Others | Air Flow/Pressure | - | Flow 150L/(min)/Pressure(6Bar) |
| Total Power | Kw | 20 | |
| Machine Weight | Kg | 4000 | |
| Machine Overall Dimensions (L×W×H) | mm | 1900×2100×2200/1900×2320×2200 (with water tank) | |
Standard Configuration:
Umbrella-shaped servo tool magazine, rear-flush chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger
Optional Configuration:
Mitsubishi/Syntec system, direct-drive 24000rpm spindle, hollow screw, grease lubrication, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note ①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note ②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Company Details
Business Type:
Manufacturer
Year Established:
2022
Total Annual:
>10000000
Employee Number:
>60
Ecer Certification：
Verified Supplier
Guchi Intelligent Equipment (Jiangsu) Co., Ltd. is a national-level high-tech enterprise specialising in the R&D, manufacturing, sales and service of CNC intelligent equipment. We are committed to supplying high-precision, high-efficiency, reliable and cost-effective CNC machine tools worldwide... Guchi Intelligent Equipment (Jiangsu) Co., Ltd. is a national-level high-tech enterprise specialising in the R&D, manufacturing, sales and service of CNC intelligent equipment. We are committed to supplying high-precision, high-efficiency, reliable and cost-effective CNC machine tools worldwide...
Get in touch with us
Leave a Message, we will call you back quickly!