Guchi Intelligent Equipment (Jiangsu) Co., Ltd.
| Payment Terms | T/T |
| Model | VMC-1890HL |
| Y-Axis Travel | 450 Mm |
| Table Size | 900 X 450 Mm |
| Type | Vertical Machining Center |
| Cutting Feed Speed | 1-10000mm/min |
| Supply Ability | 10 PCS PER MONTH |
| Repeatability | ±0.003 Mm |
| Tool Magazine Capacity | 24 Tools |
| Delivery Time | ABOUT 30 DAYS |
| Z-Axis Travel | 500 Mm |
| Brand Name | GUSS |
| Model Number | VMC-1890HL |
| Place of Origin | JIANGSU |
| Certification | CE |
View Detail Information
Explore similar products
VMC-1890HL Machining Center Vertical Low Friction High Precision Large Size
VMC-1890HL Vertical Machining Center | BT50 Heavy Duty CNC Milling Machine
VMC-1890HL High-Speed CNC Machining Center | Three-Axis Roller Heavy-Duty
VMC-1165HL High Speed CNC Machining Center | Three-Axis Roller Heavy-Duty
Product Specification
| Payment Terms | T/T | Model | VMC-1890HL |
| Y-Axis Travel | 450 Mm | Table Size | 900 X 450 Mm |
| Type | Vertical Machining Center | Cutting Feed Speed | 1-10000mm/min |
| Supply Ability | 10 PCS PER MONTH | Repeatability | ±0.003 Mm |
| Tool Magazine Capacity | 24 Tools | Delivery Time | ABOUT 30 DAYS |
| Z-Axis Travel | 500 Mm | Brand Name | GUSS |
| Model Number | VMC-1890HL | Place of Origin | JIANGSU |
| Certification | CE | ||
| High Light | CNC machining center high speed VMC ，VMC machine 24 tools magazine ，CNC machining center ±0.003mm repeatability | ||
VMC-1890HL Vertical Machining Center
| Item | Unit | VMC-1890HL | |
|---|---|---|---|
| System | CNC System | - | FANUC |
| Rapid Speed | mm/min | 20000/20000/20000 | |
| Cutting Feed Speed | mm/min | 1-10000 | |
| 3-Axis Rated Power | Kw | 3.0/3.0/3.0 [Note①] | |
| 3-Axis Rated Torque | N.m | 36.0/36.0/36.0 [Note①] | |
| Worktable | T-Slot Dimensions | - | 7-22-125 |
| Worktable Dimensions | mm | 2000×900 | |
| Max Worktable Load | Kg | 2000 | |
| Travel | 3-Axis Travel | mm | 1800×900×800 |
| Distance from Spindle Nose to Worktable | mm | 150-950 | |
| Spindle | Spindle Power | Kw | 15-18.5 (Wide Range) |
| Max Spindle Speed | rpm | 6000(Belt)/8000(Direct Drive)/10000(Direct Drive) | |
| Spindle Taper | - | BT50 | |
| Transmission | Screw Diameter/Pitch | mm | Φ55D10/Φ55D10/Φ55D10 |
| Linear Rail Brand/Type/Width | - | PMI Roller 55mm/Roller 45mm/Roller 55mm [Note②] | |
| Number of Rails/Sliders | Pcs | 2-6/4-8/2-6 | |
| Tool Magazine | Tool Magazine Capacity | Pcs | 24 [Note③] |
| BT/BBT Pull Stud Angle | ° | 45° | |
| Max Tool Diameter | mm | Φ110(Full Magazine)/Φ210(Empty Adjacent Tool) | |
| Max Tool Length/Weight | mm/kg | 350/15 | |
| Tool Change Time | s | 2.2 | |
| Partial Configuration | Automatic Chip Removal | - | Rear Flushing |
| Automatic Lubrication System | - | Thin Oil Lubrication | |
| Electrical Cabinet Cooling | - | Heat Exchanger | |
| Accuracy | Positioning Accuracy (Full Travel) | mm | 0.012 |
| Repeat Positioning Accuracy (Full Travel) | mm | 0.008 | |
| Others | Air Supply Flow/Pressure | - | Flow 150(L/min)/Pressure 6Bar |
| Total Power | Kw | 40 | |
| Machine Weight | Kg | 14600 | |
| Machine Overall Dimensions (L×W×H) | mm | 4200×3200×3200 [Note④] | |
Mechanical manual tool magazine, rear-flush chip removal, spindle oil cooler, water gun, air gun, spindle air curtain, spindle ring spray, centralized lubrication, air source treatment, oil-water separation, heat exchanger, nitrogen balance
Mitsubishi/Syntec system, hollow screw, chain-type chip removal, grease lubrication, electrical cabinet air conditioner, 4-axis, 5-axis, column heightening, tool internal cooling, fixtures, clamps
※ The product appearance and configuration are subject to improvement with technological development, but will not be lower than current technical requirements. No separate notification will be given; the specific details shall be based on the technical agreement at the time of purchase.
Note①: The 3-axis power and torque are based on FANUC. For detailed information on Mitsubishi, Syntec and other systems, please consult the corresponding account manager.
Note②: In case of stock shortage, equivalent specifications (such as HIWIN, Rexroth, THK) will be used as substitutes. No separate notification will be given.
Note③: Optional 30-tool capacity for the tool magazine.
Note④: This dimension does not include the water tank (the width of the rear-flush water tank increases by 550mm) or the chain (the length of the chain increases by 1000mm). Select one option based on the actual configuration.
Company Details
Business Type:
Manufacturer
Year Established:
2022
Total Annual:
>10000000
Employee Number:
>60
Ecer Certification：
Verified Supplier
Guchi Intelligent Equipment (Jiangsu) Co., Ltd. is a national-level high-tech enterprise specialising in the R&D, manufacturing, sales and service of CNC intelligent equipment. We are committed to supplying high-precision, high-efficiency, reliable and cost-effective CNC machine tools worldwide... Guchi Intelligent Equipment (Jiangsu) Co., Ltd. is a national-level high-tech enterprise specialising in the R&D, manufacturing, sales and service of CNC intelligent equipment. We are committed to supplying high-precision, high-efficiency, reliable and cost-effective CNC machine tools worldwide...
Get in touch with us
Leave a Message, we will call you back quickly!