Dongguan Ming Rui Ceramic Technology Co.,ltd
| Payment Terms | L/C, T/T, Western Union, MoneyGram, D/P, D/A |
| Supply Ability | 8000 pieces month |
| Delivery Time | 15 days working days after the order confirmed |
| Packaging Details | high temperature resistance 95 alo3 alumina ceramic sealing ring are packed by standrad carton or pack according to your requirements |
| Type | Electrothermal Ceramics, Insulating Ceramics |
| Material | Alumina |
| Working temperature | 1400-1650°C |
| Surface | Glazing or polishing |
| Water Absorption | 0 |
| Compressive Strength | 2000 - 2500 Mpa |
| Keywords | 95 alo3 alumina ceramic sealing ring |
| Standard or Nonstandard | Nonstandard |
| Brand Name | Mingrui |
| Model Number | CAL-SI |
| Certification | |
| Place of Origin | China |
View Detail Information
Explore similar products
99% 99.7% Alumina Ceramic Insulation Ring / Spacer / Wafer / Disk
Alumina Zirconia Ceramic Insulation Shaft Sealing Rings / Oil Seal Parts
Custom Ceramic Seal Rings , 95% 99% 99.5% Alumina Ceramic Seal Face for
Precision Ceramic Pad Spacer Gasket Shim Alumina Ceramic Seal Rings Electrical
Product Specification
| Payment Terms | L/C, T/T, Western Union, MoneyGram, D/P, D/A | Supply Ability | 8000 pieces month |
| Delivery Time | 15 days working days after the order confirmed | Packaging Details | high temperature resistance 95 alo3 alumina ceramic sealing ring are packed by standrad carton or pack according to your requirements |
| Type | Electrothermal Ceramics, Insulating Ceramics | Material | Alumina |
| Working temperature | 1400-1650°C | Surface | Glazing or polishing |
| Water Absorption | 0 | Compressive Strength | 2000 - 2500 Mpa |
| Keywords | 95 alo3 alumina ceramic sealing ring | Standard or Nonstandard | Nonstandard |
| Brand Name | Mingrui | Model Number | CAL-SI |
| Certification | Place of Origin | China | |
| High Light | ceramic mechanical seal ， zirconia ceramic ring | ||
High Temperature Resistance 95% Alo3 Alumina Ceramic Sealing Ring
Aluminium Oxide, Al2O3 is the most widely applied and cost effective technical ceramic material. It offers a combination of superior mechanical strength and electrical properties, wear resistance and corrosion resistance. The maximum working temperature is up to 1700 °C with relatively high thermal conductivity. It is also an electrically insulating material with a high electrical resistivity. The good corrosion resistance makes it insoluble in water and slightly soluble in strong acid and alkaline solution.
Ceramic features
1) High hardness.
2) High heat resistance: alumina ceramic has excellentthermal stability,which means that it is widely used in areas where resistance to high temperatures is essential.
3) Good wear resistance: alumina ceramic is the material of choice for alumina wear parts.
4) High electrical resistivity: alumina is an electrically insulating material.
5) High corrosion resistance: it is insoluble in water and only slightly soluble in strong acid and alkaline solutions. Good chemical stability of alumina leads to high corrosion resistance.
Applications:
1) High power equipments.
2) IC MOS pipe
3) High frequency prower source, communication, mechanical equipment.
4) Heavy current, heavy voltage, high temperature, thermal conductive insulating parts.
Al 2O 3 | ZrO2/Y2O3 | ZrO2/MgO | MgO | SiC | Si3N4 Reaction sintered | Si3N4 Hot pressed | ALN | |
| Physical properties | ||||||||
| Density (g/cm3) | 3,9 | 5,9 | 5,75 | 3,58 | 3,2 | 3,27 | 3,29 | 3,26 |
| Molecular weight (g/mole) | 102 | - | - | 40,4 | 40,1 | 140 | 140 | 41 |
| Maximum service temperature air (°C) | 1700- 1800 | 1500 | 1000 | 2200 | 1500 | 1200- 1500 | 1100- 1600 | 1000- 1800 |
| Mechanical properties | ||||||||
| Hardness (Mohs) | 9 | - | - | 5,5 | 9 | - | - | 7 |
| Modulus of elasticity (GPa) | 300-400 | 200 | 200 | 250-300 | 420 | 170-220 | 280-310 | 318 |
| Poisson's ratio | 0,25 | - | - | 0,18 | 0,14 | 0,25-0,26 | 0,27 | 0,25 |
| Fracture toughness (MPa.m1/2) | 2-3 | 7-13 | 6-10 | - | 2,5-3,5 | 3,5-5 | 6,1 | 4,5 |
| Electrical properties | ||||||||
| Dielectric constant | 9-10 | - | - | 9-10 | - | 10 | 10 | 9,2 |
| Electrical resistivity at 20°C (Ohm.cm) | >10 14 | 10 13-10 14 | >10 10 | - | 10 2-10 6 | >10 7 | 10 12- 10 15 | >10 14 |
| Dielectric strength (kV/mm) | 10-20 | 9 | 2-10 | - | - | - | - | 15 |
| Thermal properties | ||||||||
| Specific heat (J/K/kg) | 900 | 400-500 | 420 | 870-880 | 750 | 690 | 680-800 | 800 |
| Thermal conductivity (W/m/K) at 20°C | 26-35 | 2,2-3,2 | 1,5-2,5 | 40-50 | 63-155 | 9-30 | 15-43 | 180 |
| Coefficient of thermal expansion ( 10-6) from 20 to 1000°C | 8-9 | 10-11 | 5-16 | 10-13 | 4-5 | 3 | 3,3 | 4,4-5,3 |
| Melting point (°C) | 2050 | 2590 | - | 2800 | 2500 | 1900 | 1900 | 2200 |
Delivery:
Custom OEM will be shipped within 15 days after determining the parameters
The samples will be shipped within 3 days
Quick Delivery Via Fedex,DHL,UPS,TNT Etc.
Support customer to designate shipping company
For more informations (the price,delivery time,moq etc)about the ceramic plates, please contact us or email:admin@cerampart.com
CEO: Admin deng
Dongguan Mingrui Ceramic Tech. Co. Ltd.
Add: No.21 Chuangxing Rd., 2nd Industrial Zone of Shangsha,
Chang'an town, Dongguan city, Guangdong, China 523867
Email: admin@cerampart.com
FAQ
1. Monthly Capacity: 50,000-60,000 pcs;
2. Material: OEM or as per your suggestion;
3. Lead time: about 7-20 days, pls confirm the quantities required;
4. Incoterm: FOB, CFR, CIF;
5. Delivery Cost: It is determinated by the destination port;
6. Payment Term: PayPal; T/T; L/C.
7. Shipment: by sea, by air, by courier, by post, etc.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2007
Total Annual:
10000000-15000000
Employee Number:
80~120
Ecer Certification：
Active Member
Dongguan Ming Rui Ceramic Technology Co., LTD., a professional manufacturer of machined ceramic parts, has 10 senior engineers and lots of technicians. We produce strengthened structure zirconia ceramic bar, ceramic tube, ceramic shaft, ceramic plate, ceramic sleeve, ceramic valve, ceramic plunger a... Dongguan Ming Rui Ceramic Technology Co., LTD., a professional manufacturer of machined ceramic parts, has 10 senior engineers and lots of technicians. We produce strengthened structure zirconia ceramic bar, ceramic tube, ceramic shaft, ceramic plate, ceramic sleeve, ceramic valve, ceramic plunger a...
Get in touch with us
Leave a Message, we will call you back quickly!