Juvi Marine Machinery Co.,LTD
| Payment Terms | Western Union, MoneyGram, D/P, D/A, L/C, T/T |
| Delivery Time | in stock |
| Name | ship airbag |
| Application | ship marine boat vessel yacht |
| Certificate: | CCS / SGS / BV / ISO9001 etc. |
| Working Pressure: | 0.05MPa to 0.15Pa |
| type 1 | 6-8 layer |
| Lifespan: | 8~10 Years |
| MOQ | 1 pc |
| Brand Name | JUVI |
| Place of Origin | Chongqing of China |
View Detail Information
Explore similar products
Rubber Slipway Working Pressure 0.05MPa 8 Layers Ship Launching Airbags
Length 5m 10m 15m Working Pressure 0.15Pa Ship Launching Marine Airbags
Dia 1.2m 1.5m 1.8m 6 Layers Inflatable Airbag Roller For Ship Launching
Diameter 1.2m ABS Certificate 3 Layers Inflatable Ship Launching Airbags
Product Specification
| Payment Terms | Western Union, MoneyGram, D/P, D/A, L/C, T/T | Delivery Time | in stock |
| Name | ship airbag | Application | ship marine boat vessel yacht |
| Certificate: | CCS / SGS / BV / ISO9001 etc. | Working Pressure: | 0.05MPa to 0.15Pa |
| type 1 | 6-8 layer | Lifespan: | 8~10 Years |
| MOQ | 1 pc | Brand Name | JUVI |
| Place of Origin | Chongqing of China | ||
| High Light | 12m Ship Launching Airbags ，0.33MPA Ship Launching Airbags ，12m ship rubber airbag | ||
Ship Vessel Tugboat Launching Airbags Salvage Hoist Lifting 12meter
Specification
| Airbag Layer and Pressure: | ||||||
| D=0.8m | D=1.0m | D=1.2m | D=1.5m | D=1.8m | D=2.0m | |
| 3 layers | 0.13MPA | 0.10MPA | 0.09MPA | 0.07MPA | 0.06MPA | 0.05MPA |
| 4 layers | 0.17MPA | 0.13MPA | 0.11MPA | 0.09MPA | 0.08MPA | 0.07MPA |
| 5 layers | 0.21MPA | 0.17MPA | 0.14MPA | 0.11MPA | 0.09MPA | 0.08MPA |
| 6 layers | 0.25MPA | 0.20MPA | 0.17MPA | 0.13MPA | 0.11MPA | 0.10MPA |
| 7 layers | 0.29MPA | 0.23MPA | 0.20MPA | 0.15MPA | 0.13MPA | 0.12MPA |
| 8 layers | 0.33MPA | 0.26MPA | 0.23MPA | 0.17MPA | 0.15MPA | 0.14MPA |
Airbag repair
The damage forms of marine airbags can generally be divided into longitudinal cracks (the cracks extend along the length of the airbag), transverse cracks (the cracks extend in the circumferential direction), and nail holes (including disc-shaped damages within 10cm in diameter). The operation steps are as follows:
1) Delineate the repair range as the boundary of the polished surface. The repair range should extend to the cracks, and do not miss any hidden injuries. The expansion range depends on the airbag model and damage range. Usually, the 3-layer is 18-20cm; the 4-layer is 20-22cm; the 5-layer is 22-24cm; the 6-layer is 24-26cm.
Laying of rubber cord with longitudinal cracks
2) Polish and repair part of the surface until the fiber thread is exposed, but do not damage the fiber thread.
3) For longer cracks, first use cord to sew. The stitch hole position is about 2 to 3 cm away from the crack, and the stitch distance is about 10 cm.
4) Clean the surface of the part to be repaired with gasoline and let it dry.
5) Apply a layer of glue. The glue is prepared by soaking raw rubber in gasoline. The weight ratio of raw rubber to gasoline is usually 1:5, and the first layer should be slightly thinner (the weight ratio of raw rubber to gasoline can be 1:8). After the first layer of glue has dried, apply a thicker glue and let it dry.
6) Seal the crack with a raw rubber strip with a thickness of 1mm and a width of 1cm larger than the crack.
7) Brush the gasoline and let it dry.
8) For longitudinal cracks, first apply a layer of rubberized cord cloth with a width of about 10cm perpendicular to the crack direction. For transverse cracks and nail holes, step (10) can be performed directly.
9) Brush the gasoline and let it dry.
10) Lay a layer of rubberized cord fabric parallel to the longitudinal direction. The overlap area around the crack should be greater than 5cm, and the surrounding area should be cut into rounded corners
11) Brush the gasoline and let it dry.
12) Lay a layer of hanging rubber cord diagonally. The direction of the cords should be the same as the oblique cords (or reinforcement fibers) in the bag wall. The surrounding overlap area should be 1cm larger than the previous layer of rubber curtain fabric, and the surrounding area should be cut into rounded corners
13) Brush the gasoline and let it dry.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Other
Year Established:
2012
Total Annual:
15000000-20000000
Employee Number:
100~120
Ecer Certification：
Site Member
Chongqing Juvi marine machinery company is an integrated marine technology company that presently specializes in product design, production, and sales. The Juvi has both, a professional technical staff and strong sales team. Our products have sold to regions as far away as Europe, North... Chongqing Juvi marine machinery company is an integrated marine technology company that presently specializes in product design, production, and sales. The Juvi has both, a professional technical staff and strong sales team. Our products have sold to regions as far away as Europe, North...
Get in touch with us
Leave a Message, we will call you back quickly!