Product Specification
Product Introduction
Product Introduction
Horizontal/oblique raised stripes enhance friction, reduce slipping in humid environments, quickly drain water, strengthen anti-slip performance, and are suitable for areas prone to water accumulation.
The EVA material is elastic and soft. Combined with the stripes, it buffers foot pressure, reduces fatigue, and the concave-convex design brings a slight massage feeling, improving barefoot comfort.
EVA is resistant to seawater, ultraviolet rays, high and low temperatures. The raised stripes are reinforced, featuring good wear resistance, withstanding stepping and rolling, thus having a long service life.
Stain and water can be easily discharged through the gaps between stripes. It can be cleaned by rinsing with water or simple wiping, not easy to hide dirt and reduce the possibility of mold growth.
The stripe pattern is simple and concise. It can divide areas through color matching to clarify functional zones, and can also hide slight scratches and stains, appearing less dirty visually.
The material is lightweight and tough, can be flexibly cut to fit decks of different shapes, and is easy to install without professional tools.
Taking advantage of EVA's sound insulation and shock absorption properties, the stripe structure further absorbs noise, reduces vibration sounds, and improves environmental comfort.
Product Parameters
Product Name |
EVA Deck Flooring With Stripes |
Product Color |
Blue + black stripes |
Product Size |
90*240CM/120*240CM |
Product thickness |
6MM |
Precautions
Clean the deck surface before installation: Thoroughly remove dust, gravel, oil stains and other debris from the deck. If there are raised rust spots or burrs, they need to be ground flat to ensure the surface is clean and smooth, preventing the deck mat from adhering poorly or being partially worn due to debris.
Check the flatness of the deck: Before installation, carefully inspect whether the deck has obvious depressions, bulges or deformations. Uneven areas must be repaired; otherwise, the laying effect of the deck mat will be affected, and long-term use may cause the mat to be damaged due to uneven stress.
Measure and cut accurately: Measure the actual size of the deck precisely before cutting the deck mat. Reserve a certain amount of expansion space during cutting to avoid the edges of the mat from warping due to incorrect size or thermal expansion and contraction.
Choose an appropriate fixing method: Select a suitable fixing method according to the usage scenario and deck material, such as using special glue, double-sided tape or clips. Ensure uniform force when fixing to avoid local over-tightening or loosening.
Avoid installation in extreme weather: Try to avoid installation in rainy, snowy weather or environments with excessively low temperatures. Extreme weather may affect the adhesiveness of the adhesive and cause abnormal expansion and contraction of the EVA material, thus impacting the installation quality.
Avoid excessive pulling during laying: When laying the deck mat, handle it gently, lay it flat along the natural direction, and avoid pulling or dragging forcefully to prevent the mat from deforming or tearing. Pay special attention to the edges and corners to ensure they are flat and well-adhered.
Properly handle the seams: If multiple deck mats need to be spliced, the seams must be aligned and tightly fitted. Special sealant can be used to treat the seams to prevent water from seeping under the seams and damaging the deck, while also avoiding the seams from becoming a tripping hazard.
Pay attention to the specifications for using adhesives: If using adhesives, control the dosage according to the product instructions, apply it evenly, and wait until the adhesive reaches its optimal viscosity before attaching the deck mat. Ensure good ventilation during operation to avoid discomfort caused by the adhesive's odor.
Avoid immediate loading after installation: After installation, depending on the fixing method, allow sufficient curing or bonding time. Do not walk on it or place heavy objects immediately to prevent the mat from shifting or the fixing from failing.
Post-installation inspection and maintenance: After installation, thoroughly check whether the deck mat is flat, firmly fixed, and free of bubbles or warped edges. Address any issues promptly. During daily use, regularly clean the surface of the mat and avoid scratches from sharp objects to extend its service life.
Company Details
Bronze Gleitlager
,
Bronze Sleeve Bushings
and
Graphite Plugged Bushings
from Quality China Factory
-
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Seller
-
-
Total Annual:
10000000-50000000
-
Employee Number:
100~200
-
Ecer Certification:
Verified Supplier
+ Read More