| Product Type | Programmable I/O Module |
| OEM / ODM | Firmware logic, PID defaults, protocol behaviour, branding and packaging |
| Delivery Time | 7-15 work days |
| Output Channels | 3 x analog output + 3 x relay output |
| Power Supply | DC 24 V (21-28 V DC), <= 3 W typical, <= 5 W with 3 relays on |
| Packaging Details | 1 pc per anti-static bag, standard export carton; neutral or OEM branded packing available |
| Analog Output | 0-10 V / 4-20 mA, 12-bit PWM, soft start, MAN/AUTO |
| Operating Temperature | -20 ~ +60 degC, 5-95 % RH non-condensing, IP20 |
| Configuration | Web interface at 192.168.5.2 over USB-RS485, online firmware upgrade |
| Payment Terms | T/T |
| Control Function | Built-in PID + up to 16 Function Blocks, 100 ms scan cycle |
| Dimensions | 88 x 107 x 59 mm (W x H x D), approx. 220 g |
| Application | BAS/BMS, HVAC, data centre liquid cooling (CDU), PLC/DCS, energy management |
| Internal Points | N1-N32, float or logic, readable over the bus |
| Mounting | 35 mm DIN rail (clip type) |
| Supply Ability | 3000 Piece / Month |
| Input Channels | 6 x universal input: 0-10 V / 4-20 mA / NTC-10K / Dry Contact |
| Isolation | Full isolation between power, RS485 and relay outputs |
| Communication | Modbus RTU slave / BACnet MS/TP master node |
| Model Number | P-IOM633 |
| Certification | CE (EMC), RoHS |
| Place of Origin | Shenzhen, China |
| Brand Name | Qingchen |
View Detail Information
Explore similar products
Product Specification
| Product Type | Programmable I/O Module | OEM / ODM | Firmware logic, PID defaults, protocol behaviour, branding and packaging |
| Delivery Time | 7-15 work days | Output Channels | 3 x analog output + 3 x relay output |
| Power Supply | DC 24 V (21-28 V DC), <= 3 W typical, <= 5 W with 3 relays on | Packaging Details | 1 pc per anti-static bag, standard export carton; neutral or OEM branded packing available |
| Analog Output | 0-10 V / 4-20 mA, 12-bit PWM, soft start, MAN/AUTO | Operating Temperature | -20 ~ +60 degC, 5-95 % RH non-condensing, IP20 |
| Configuration | Web interface at 192.168.5.2 over USB-RS485, online firmware upgrade | Payment Terms | T/T |
| Control Function | Built-in PID + up to 16 Function Blocks, 100 ms scan cycle | Dimensions | 88 x 107 x 59 mm (W x H x D), approx. 220 g |
| Application | BAS/BMS, HVAC, data centre liquid cooling (CDU), PLC/DCS, energy management | Internal Points | N1-N32, float or logic, readable over the bus |
| Mounting | 35 mm DIN rail (clip type) | Supply Ability | 3000 Piece / Month |
| Input Channels | 6 x universal input: 0-10 V / 4-20 mA / NTC-10K / Dry Contact | Isolation | Full isolation between power, RS485 and relay outputs |
| Communication | Modbus RTU slave / BACnet MS/TP master node | Model Number | P-IOM633 |
| Certification | CE (EMC), RoHS | Place of Origin | Shenzhen, China |
| Brand Name | Qingchen |
P-IOM633 is a DIN-rail programmable I/O module that combines remote I/O acquisition with local programmable control. Built on the proven IOM-633 hardware platform with expanded MCU flash and rewritten firmware, it adds built-in PID closed-loop control, a web configuration interface and Function Block programming, so building automation, HVAC and industrial projects can close the control loop inside the module - without an extra controller or a dedicated host computer. Modbus RTU and BACnet MS/TP models are available for direct integration with BMS, PLC and DCS systems.
| Model | Fieldbus | Bus role | Default address |
| PIOM-633-M | Modbus RTU | Slave | 1 (range 1-247) |
| PIOM-633-B | BACnet MS/TP | Master node | MAC 1 (range 0-127) |
The communication protocol is fixed at the factory according to the model; please confirm the required model when ordering.
| Universal Input (UI1-UI6 / terminals I1-I6) | |
| Channels | 6, each independently configurable |
| Operating modes | 0-10 V / 4-20 mA / NTC-10K temperature / Dry Contact |
| Resolution | 12-bit ADC |
| Measurement range | 0-10 V; 4-20 mA (499 ohm sense resistor); NTC-10K -55 ~ +250 degC |
| Accuracy | 0-10 V: <= +/-0.8 % FS; 4-20 mA: <= +/-1.5 % FS; channel consistency <= 0.2 % FS |
| Over-range | The reading holds the last valid value |
| Analog Output (AO1-AO3 / terminals M1-M3) | |
| Channels / mode | 3, 0-10 V or 4-20 mA, independently configurable |
| Resolution | 0-1000 (0.1 % of full scale), 12-bit PWM |
| Accuracy | <= +/-0.8 % FS (0-10 V) |
| Control | Function Block (AUTO) or manual override (MAN), 10-step soft start |
| Digital Input and Output | |
| Digital input | 6 channels, shared with UI1-UI6 in DRY mode, dry contact, 20 ms debounce, high active |
| Relay output | 3 channels (D1-D3 / Q1-Q3), independent passive contacts with no common terminal, LATCH / PULSE (100 ms default), MAN/AUTO |
| Internal points | N1-N32, floating-point or 0/1 logic, readable and writable over the bus |
| Communication and System | |
| RS485 | Two-wire, 1 channel (A/B), automatic direction control |
| Baud rate | 9600 / 19200 / 38400 / 57600 / 76800 / 115200 bps |
| Data format | 7 or 8 data bits, no/odd/even parity, 1 or 2 stop bits |
| Defaults (Modbus) | 9600 bps, 8 data bits, no parity, 1 stop bit, slave address 1 |
| Defaults (BACnet) | 76800 bps, 8 data bits, no parity, MAC 1, device instance 1000 |
| Refresh / scan | I/O refresh 10 ms; Function Block scan 100 ms; watchdog approx. 3.2 s |
| Electrical and Mechanical | |
| Power supply | DC 24 V (21-28 V DC); supply must be >= 24 V for full analog accuracy |
| Power consumption | <= 3 W (24 V DC, no load); <= 5 W with all 3 relays energised |
| Dielectric withstand | 500 V DC for 1 min (power to communication terminals) |
| Isolation | Complete isolation between power supply, communication port and the 3 relay outputs |
| Operating / storage | -20 ~ +60 degC / -40 ~ +85 degC, 5-95 % RH non-condensing |
| Protection / mounting | IP20 (control cabinet), 35 mm DIN rail |
| Dimensions / weight | 88 x 107 x 59 mm (W x H x D), approx. 220 g |
| Housing / terminals | Flame-retardant ABS/PC (UL94-V0); screw terminals, 5.08 mm pitch, 0.2-2.5 mm2 |
| Block | Function | Main parameters |
| PID | Closed-loop controller (P/I/D) | SP, Kp, Ti (0 = off), Td, dead zone, output bias, direct/reverse action, Ymin/Ymax |
| Scale | Linear range conversion | Input low/high, output low/high |
| High / Low Select | Selects the larger / smaller of two inputs | - |
| Two-Position | On/off control with threshold | ON value, OFF value |
| Compare | Threshold comparison, outputs 0/1 | Greater-than / less-than, threshold |
| AND / OR / NOT | Logic operations | - |
| Delay | On / off delay | On delay (s), off delay (s) |
| Buffer | Signal pass-through / relay | - |
Up to 16 blocks run in sequence on a 100 ms scan cycle; sources and targets can be universal inputs, internal points, analog outputs or relay outputs. When two blocks write the same output the interface raises a write-conflict warning before saving.
All settings are written immediately and permanently stored by Save to Flash; firmware upgrade, configuration export/import and factory reset are performed from the same interface. The page supports English plus a second interface language, switchable in the top-right corner.
Mount the module on a standard 35 mm DIN rail where the status LEDs and key are visible. Supply DC 24 V to terminals 24V+ / V- with correct polarity; connect the RS485 bus to B/A with shielded twisted pair and ground the shield at one point only. Universal input channels share the common terminals G1-G3 and each has a 3-pin jumper (J7-J12): pins 2-3 for 0-10 V / NTC-10K / dry contact, pins 1-2 for 4-20 mA - the jumper must match the configured channel type. Analog outputs M1-M3 use G3 as common; each relay output Dn/Qn is an isolated contact pair to be wired in series with the load and external supply.
1 x PIOM-633 programmable I/O module (ordered model) | 1 x product certificate | 1 x user manual
As a manufacturer we support project-specific firmware: custom control logic and Function Block presets, PID defaults, protocol behaviour, channel naming, interface language packs, branding and packaging. Send us your I/O list and control sequence and we will come back with a configuration proposal.
| What is the difference between PIOM-633-M and PIOM-633-B? | Both share the same hardware. PIOM-633-M works as a Modbus RTU slave (default 9600 bps, address 1); PIOM-633-B works as a BACnet MS/TP master node (default 76800 bps, MAC 1). The protocol is fixed at the factory per model. |
| Can it run PID control without an extra controller? | Yes. The Function Block engine runs inside the module, so PID, scaling, selection and interlock logic execute locally; the master station only reads and writes points. |
| Can I connect 4-20 mA sensors directly? | Yes - set the channel type to 4-20 mA and move that channel's jumper (J7-J12) to pins 1-2. Other channels stay at the factory position. |
| How do I configure and upgrade the module? | Over the RS485 port in Web configuration mode, from a browser at http://192.168.5.2/. Configuration files can be exported/imported and firmware upgraded online. |
| Do you support OEM/ODM and sample orders? | Yes. Sample orders, custom firmware, branding and packaging are all supported - please contact us with your application details. |
Designed and manufactured in compliance with CE (EMC) and RoHS requirements. Warranty: 12 months from purchase for quality-related faults under normal use (subject to the sales contract).
P-IOM633 / PIOM-633 programmable I/O module - BACnet MS/TP and Modbus RTU, PID control, 6 AI 3 AO 6 DI 3 relay, 24 V DC DIN-rail mounted. Please contact us for a quotation or OEM/ODM project support.
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2024
Total Annual:
$1M- $5M
Employee Number:
10~30
Ecer Certification:
Verified Supplier
Shenzhen Qingchen Telecommunications Co., Ltd. is a manufacturer of building automation and industrial control equipment based in Bao'an District, Shenzhen. We bring together research and development, production, sales and service, supplying environmental sensors, field controllers, protocol gateway... Shenzhen Qingchen Telecommunications Co., Ltd. is a manufacturer of building automation and industrial control equipment based in Bao'an District, Shenzhen. We bring together research and development, production, sales and service, supplying environmental sensors, field controllers, protocol gateway...
Get in touch with us
Leave a Message, we will call you back quickly!