Phidix Motion Controls (Shanghai) Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T |
| Supply Ability | 888 Piece / Pieces per Month |
| Delivery Time | 7 - 40 work days |
| Packaging Details | carton or wood case |
| Name | automotive control cable head |
| Applications | General Aviation Aircraft |
| Travel | 3.00” maximum |
| Bend Radius | 3.00” minimum & 7.00” minimum |
| Operating Temp | -65°F — 165°F (input) 230°F (output) |
| Material | Stainless Steel or Plated Carbon Steel / Plastic Coated Carbon Steel Conduit and Innermember / Plastic Seal / Plastic Knob |
| Brand Name | PHIDIX |
| Model Number | Customized |
| Certification | IATF16949 |
| Place of Origin | China |
View Detail Information
Explore similar products
Micro Adjust Control Heads: Precision Industrial Throttle & PTO RPM Adjustment
Micro Adjust Hand Throttle Control Cable Assembly Wire Rope Output 565 - 557
Electronic Machinery Mechanical Control Cable Head , Twist Lock Throttle Cable
Corrosion Proof Control Cable Assembly Micro Adjust Series Control Heads
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T | Supply Ability | 888 Piece / Pieces per Month |
| Delivery Time | 7 - 40 work days | Packaging Details | carton or wood case |
| Name | automotive control cable head | Applications | General Aviation Aircraft |
| Travel | 3.00” maximum | Bend Radius | 3.00” minimum & 7.00” minimum |
| Operating Temp | -65°F — 165°F (input) 230°F (output) | Material | Stainless Steel or Plated Carbon Steel / Plastic Coated Carbon Steel Conduit and Innermember / Plastic Seal / Plastic Knob |
| Brand Name | PHIDIX | Model Number | Customized |
| Certification | IATF16949 | Place of Origin | China |
| High Light | push pull control cable ，gear shift control cable | ||
Micro Adjust Performance Push - Pull Control Head Has A Variety Of Flexible Trimming Handles
Product Description
We are a designer and manufacturer of an extensive range of aircraft cables. The throttle, mixture, and prop/pitch micro adjust controls are in full compliance with FAA regulations. For adjusting course travel, the knob needs to be pushed or pulled by depressing the center button.
Counter-clockwise rotation of the knob leads to retraction of the output in finite mode, while clockwise rotation leads to its extension. For 1" of linear travel, four and one-half turns are needed. The micro adjust setting is not affected by normal vibration.
In terms of accessories, an optional friction lock is available. This is needed for applications getting impacted by extreme vibration. Also available is a control head only for friction lock.
Features
• Glass filled nylon control head
• Travel: 3.00" maximum
• Bend radius:3.00" minimum & 7.00" minimum
• Operating temp:-65°F — 165°F (input);230°F (output)
Applications
• General aviation aircraft
• Throttle control
• Mixture control
• Prop/pitch control
Suggested End Fittings
• Full Range
Technical Parameters
Standard Output - Throttle 565-550
| Notes: (Design Parameters) | Operating temperature: | Lost motion: .030 + .0004 per degree of bend with ± 5.0lb of force |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | Normal load: ±20lb |
| Minimum bend radius:3.00" | Glass filled nylon control head. |
Wire Rope Output - Throttle 565-557
| Notes: (Design Parameters) | Operating temperature: | Normal load: Unspecified (determined by installation configuration) |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | |
| Minimum bend radius: 3.00" | Glass filled nylon control head. |
Solid Wire Output - Throttle 565-558
| Notes: (Design Parameters) | perating temperature: | Normal load: Unspecified (determined by installation configuration) |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | |
| Minimum bend radius: 7.00" | Glass filled nylon control head. |
Friction Lock Control - Throttle 565-555
| Notes: (Design Parameters) | Operating temperature: | Normal load: 120lb tension,25lb compression |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | |
| Minimum bend radius: 3.00" | Lost motion: .030'' + .0004 per degree of bend with ± 5.0lb of force | Glass filled nylon control head. |
Standard Output - Mixture 565-550
| Notes: (Design Parameters) | Operating temperature: | Lost motion: .030 + .0004 per degree of bend with ± 5.0lb of force |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | Normal load: ± 20lb |
| Minimum bend radius: 3.00" | Glass filled nylon control head. |
Wire Rope Output - Mixture 565-557
| Notes: (Design Parameters) | Operating temperature: | Normal load: Unspecified (determined by installation configuration) |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | |
| Minimum bend radius: 3.00" | Glass filled nylon control head. |
Solid Wire Output - Mixture 565-558
| Notes: (Design Parameters) | Operating temperature: | Normal load: Unspecified (determined by installation configuration) |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | |
| Minimum bend radius: 7.00" | Glass filled nylon control head. |
Standard Output - Prop/Pitch 565-550
| Notes: (Design Parameters) | Operating temperature: | Lost motion: .030 + .0004 per degree of bend with ± 5.0lb of force |
| Stroke: 3.00" | from -65°F — +230°F Normal load: ±20lb | |
| Minimum bend radius: 7.00" | Glass filled nylon control head. |
Wire Rope Output - Prop/Pitch 565-557
| Notes: (Design Parameters) | Operating temperature: | Normal load: Unspecified (determined by installation configuration) |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | |
| Minimum bend radius: 3.00" | Glass filled nylon control head. |
Solid Wire Output - Prop/Pitch 565-558
| Notes: (Design Parameters) | Operating temperature: | Normal load: Unspecified (determined by installation configuration) |
| Stroke: 3.00" | from -65°F — +165°F at input end/+230°F at output end | |
| Minimum bend radius: 7.00" | Glass filled nylon control head. |
Ordering Codes
All line art dimensions are respented in inches.
Material
• Stainless Steel or Plated Carbon Steel
• Plastic Coated Carbon Steel Conduit and Innermember
• Plastic Seal
• Plastic Knob
Packing and Shipping
Ordering Codes — UNF Threads
Duty — Size —— ¼
Output Options (Bulkhead Clamp) —— BC
Travel (inches) —— 3
Cable Length (inches) —— XXX
Ordering Codes — Metric Threads
Duty — Size —— M6
Output Options (Bulkhead Clamp) —— BC
Travel (mm) —— 75
Cable Length (mm) —— XXX
FAQ
Q: What is the brand of the Control Cables?
A: The brand of the Control Cables is PHIDIX.
Q: What is the model number of the Control Cables?
A: The model number of the Control Cables is PHIDIX.
Q: Where is the Control Cables manufactured?
A: The Control Cables is manufactured in Shanghai.
Q: What are the specifications of the Control Cables?
A: Please contact us for the specifications of the Control Cables.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
2004
Employee Number:
100~120
Ecer Certification：
Verified Supplier
Phidix Motion Controls (PMC) | Exclusive Authorized Cablecraft Motion Controls (CMC) Assembler in China Company Profile Established in 2004 as Shanghai Phidix Trading Co., Ltd., PMC became the sole authorized assembler of Cablecraft Motion Controls (CMC) in China in 2011. CMC, formerly a subsidiary... Phidix Motion Controls (PMC) | Exclusive Authorized Cablecraft Motion Controls (CMC) Assembler in China Company Profile Established in 2004 as Shanghai Phidix Trading Co., Ltd., PMC became the sole authorized assembler of Cablecraft Motion Controls (CMC) in China in 2011. CMC, formerly a subsidiary...
Get in touch with us
Leave a Message, we will call you back quickly!