3000rpm Rexroth MKD041B-144-KG1-KN Motor ‌Bosch Servo Energy Saving

Product Specification

Rexroth MKD041B-144-KG1-KN Servo Motor ‌Energy-saving Durable New Safety

Product Description:

Advantages and features of Rexroth servo motors

‌High precision and dynamic performance‌

Advanced control algorithms (such as PID regulation) and high-resolution encoder systems are used to achieve micron-level position control and fast dynamic response, which is suitable for high-precision scenarios such as CNC machine tools and industrial robots.

Short dynamic response time, can adapt to high-frequency start and stop and load mutations, and maintain stability in high-speed movement (maximum speed of 9000/min).

‌Energy-saving and power characteristics‌

High torque density design (maximum 495 Nm), providing powerful power output in a compact volume, wide power coverage (0.1kW to hundreds of kW), adaptable to different industrial needs.

Efficiency exceeds 90%, combined with closed-loop control technology to reduce ineffective energy consumption, support speed, torque, position multi-mode switching, and optimize energy utilization.

‌Modular and structural design‌

Adopting narrow size classification and modular design, it is easy to integrate into automated production lines or equipment, and is compatible with mainstream communication protocols such as EtherCAT and PROFINET.

Provide a variety of feedback systems such as resolver feedback and multi-turn absolute encoder to meet standard to high-precision control needs.

‌Environmental adaptability and reliability‌

The protection level reaches IP65/IP67, and it can withstand dust, moisture and extreme temperatures from -20℃ to +80℃, suitable for harsh working conditions such as metallurgy and chemical industry.

Supports multiple cooling methods such as air cooling and liquid cooling to ensure heat dissipation performance and stability during long-term operation.

‌Intelligence and compatibility‌

Built-in fault diagnosis interface (such as LED status indication), real-time monitoring of overcurrent, signal abnormality and other problems, and supports remote parameter adjustment and maintenance.

The integrated drive and control design simplifies the system architecture, reduces the complexity of integration, and is suitable for applications in multiple fields such as CNC systems and packaging machinery.

Precautions for use

‌Installation and commissioning specifications‌

During installation, the centering accuracy of the motor shaft and the load shaft must be strictly guaranteed (deviation ≤0.1mm) to avoid uneven radial/axial force causing bearing wear.

During the commissioning stage, the zero point position must be calibrated by software, and parameters such as stiffness coefficient and acceleration curve must be set to prevent overshoot or oscillation.

‌Environment and power management‌

Avoid long-term exposure to corrosive gases or high humidity environments, and select special sealing models when necessary.

The power supply voltage fluctuation should be controlled within ±10%. It is recommended to configure a filter to reduce the impact of electromagnetic interference on the encoder signal.

‌Maintenance and troubleshooting‌

Check the bearing lubrication status every 2000 hours of operation, add special grease, and clean the dust in the heat dissipation duct.

When abnormal noise or vibration occurs, first check the loose coupling, poor contact of the encoder signal line, or mechanical jamming.

‌Safety operation requirements‌

It is forbidden to disassemble the motor or drive with power on. Before operation, the power supply must be cut off and the residual voltage of the system must be released.

After the overload alarm, the load abnormality must be checked to avoid forced reset that causes permanent magnet demagnetization or winding damage.

With intelligent control and high reliability design, this series of motors are widely used in CNC machine tools, packaging machinery and robotics, significantly improving the accuracy and efficiency of automation systems.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.