AVENTICS Oil Cylinder R480060085 Pneumatic Piston Rod Cylinder Safety New

Product Specification

Product Description:

AVENTICS R480060085 Pneumatic Piston Rod Cylinder ‌High Durability Safety New

Advantages and features of Anvotech pneumatic piston rod cylinders

‌High durability and structural strength‌

Made of high-quality materials (such as polyurethane seals, propylene resin dust rings), with extremely low failure rate, can operate stably under compressed air pressure up to 12 bar;

The double-acting cylinder design supports bidirectional output thrust, suitable for frequent start-stop scenarios (such as automated production lines, material handling equipment).

‌Wide environmental adaptability‌

Withstands a wide temperature range (-25℃~80℃), meeting the needs of high and low temperature environments, and some models have passed ATEX explosion-proof certification, suitable for flammable and explosive scenarios;

Requires low oil content in compressed air (0~5 mg/m³), suitable for ordinary industrial air source systems.

‌Precise control and buffering performance‌

Equipped with elastic buffer design, it effectively absorbs the impact energy of high-speed piston movement (up to 2 m/s) and reduces mechanical vibration and noise;

Standardized piston rod thread (such as M10×1.25), supports precise stroke adjustment (minimum 10 mm), and repeatable positioning accuracy of ±0.1 mm.

‌Modular and intelligent integration‌

Adopting a compact design (such as ISO 6432 standard), supporting Easy-2-Combine modular combination, it is easy to integrate into complex systems quickly;

Magnetic switches or sensors can be embedded to feedback the piston position in real time, and linked with the PLC system to achieve automatic control.

Precautions for use

‌Installation specification‌

It needs to be installed vertically and ensure that the piston rod is aligned with the load axis to avoid lateral force causing seal wear; special working conditions require reinforcement of the bracket to prevent vibration displacement;

Before installation, the air pipeline must be thoroughly cleaned and particulate impurities in the compressed air must be filtered (accuracy ≤50 μm).

‌Medium and working condition adaptation‌

The compressed air temperature must be at least 15℃ lower than the ambient temperature. When the medium temperature exceeds 80℃, high temperature resistant seals must be used;

For frequent reciprocating motion scenarios, it is recommended to adjust the air pressure to 6.3 bar to balance load demand and energy consumption36.

‌Operation and maintenance points‌

Lubrication requirements: Only use AVENTICS certified special oil, add grease to the piston rod surface every week, and apply anti-rust oil for long-term non-use;

Regular inspection: After pressurizing to the rated value, use soapy water to test the sealing of the interface. If the leakage exceeds the standard, the fluororubber seal ring needs to be replaced.

‌Safety and fault prevention‌

Avoid overload operation (opening and closing torque ≤ 240 N·m), and the impact cylinder needs to control the kinetic energy output (≤ 1.5 J) to prevent component damage;

In high humidity environments, the sensor contacts need to be cleaned regularly to prevent signal distortion; it is recommended to enable the mechanical locking device to prevent displacement when the system is powered off.

Through reasonable selection and standardized operation, AVENTICS piston rod cylinders can be widely used in filling machinery, automobile manufacturing, logistics sorting and other fields, taking into account high efficiency and long life.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.