Dongxin Melamine (Xiamen) Chemical Co., Ltd.
| Product namee | Amino Molding Compound |
| Material | 30% melamine |
| Color: | Custom |
| PH Value | 7.5 |
| Flow(mm) | 194 |
| Viscosity 25℃ | 4000CPS |
| Appearance of molded tableware | Like Porcelain |
| Packing: | 25kg/bag |
| Payment Terms | L/C, D/A, D/P, T/T |
| Supply Ability | 7000 Metric Ton/Metric Tons per Month |
| Delivery Time | 15 days after be paid |
| Packaging Details | 25kg PP woven bag with inner waterproof in general |
| Brand Name | shuanghaijin |
| Model Number | A1 |
| Certification | SGS |
| Place of Origin | Jiangxi china |
View Detail Information
Explore similar products
Moulding Tableware Compound Urea Formaldehyde Powder
China Melamine Urea Formaldehyde Resin Powder Cas 9011 05 6 OEM For Plywood
White Urea Formaldehyde Resin Powder With Long Shelf Life
Chemical Raw Materials Melamine 99.8% Urea Molding Compound Melamine Powder
Product Specification
| Product namee | Amino Molding Compound | Material | 30% melamine |
| Color: | Custom | PH Value | 7.5 |
| Flow(mm) | 194 | Viscosity 25℃ | 4000CPS |
| Appearance of molded tableware | Like Porcelain | Packing: | 25kg/bag |
| Payment Terms | L/C, D/A, D/P, T/T | Supply Ability | 7000 Metric Ton/Metric Tons per Month |
| Delivery Time | 15 days after be paid | Packaging Details | 25kg PP woven bag with inner waterproof in general |
| Brand Name | shuanghaijin | Model Number | A1 |
| Certification | SGS | Place of Origin | Jiangxi china |
| High Light | Melamine Urea Formaldehyde Resin Powder ，uf melamine molding powder ，uf Urea Formaldehyde Resin Powder | ||
Mold Melamine Urea Formaldehyde Resin Powder Chemical Resistance
Industry Base Urea Molding Compound Raw Material
what is Urea formaldehyde
It uses melamine formaldehyde resin as the base material, adds advanced cellulose intensifiers, and adds a small amount of special additives, pigments, curing regulators and conversion for modification. The module has no peculiar smell, stable light and good moisture resistance. The surface is hard and smooth and will not attack the material. They are also resistant to surfactants and weak alkalis.
Industrially, it is used as a catalyst, and the molar ratio of formaldehyde/urea at about 95°C is 1.5 to 2.0 to ensure that the resin can be cured. The first step of the reaction is to produce one and two methylolureas, and then further condense methylol and amino groups to replace the soluble resin. If it is catalyzed by acid, it will easily lead to gelation. The product must be stored under neutral conditions. Linear UF resin can be cured at room temperature with ammonium chloride as curing agent.
It uses melamine formaldehyde resin as the base material, adds advanced cellulose intensifiers, and adds a small amount of special additives, pigments, curing regulators and conversion for modification. The module has no peculiar smell, stable light and good moisture resistance. The surface is hard and smooth and will not attack the material. They are also resistant to surfactants and weak alkalis.
The molding powder is heated and cured at 130~160°C, and the curing process can be promoted by accelerators such as zinc sulfate, trimethyl phosphate and diethyl oxalate. Urea-formaldehyde resins are mainly used in the manufacture of molded plastics, daily necessities and electrical components. They can also be used as board adhesives, paper and fabric sizing agents, laminates, architectural decorative panels, etc. Because of its light color and easy to use coloring, products are often rich in color.
|
Index |
Unit |
Type |
Testing Method |
|
|
|
|
A- |
|
|
|
1 |
Appearance |
|
After molding, the surface should be flat, shinny and smooth, no bubbles or crack, color and foreign material achieves standard. |
|
|
2 |
Resistance to boiling water |
|
No mushy, permit little color fade and purse |
GB13454 |
|
3 |
Volatile matter |
%,≤ |
4.00 |
GB13455 |
|
4 |
Water absorb (cold) |
mg, ≤ |
100 |
GB1034 |
|
5 |
Shrinkage |
% |
0.60-1.00 |
GB13454 |
|
6 |
Distortion Temperature |
°C≥ |
115 |
GB1634 |
|
7 |
Fluidity |
mm |
140-200 |
GB13454 |
|
8 |
Impact Strength (notch) |
KJ/m2, ≥ |
1.8 |
GB1043 |
|
9 |
Bending Strength |
Mpa, ≥ |
80 |
GB9341 |
|
10 |
Insulation Resistance after 24h in water |
MΩ≥ |
104 |
GB1410 |
|
11 |
Dielectric strength |
MV/m,≥ |
9.0 |
GB1408 |
|
12 |
Baking Resistance |
GRADE |
I |
GB2407 |
Packing and shipping
Packing: White box, Color box, Brown box , it all depends on customer's requirements.
Delivery time: 15-25 days based on MOQ.
Payment term: T/T, Western Union, Paypal, LC at sight.
Shipping Type: FOB/CIF by Sea/Air, Express etc.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Trading Company,Seller
Year Established:
2006
Total Annual:
10,000,000-10,000,000
Employee Number:
800~1000
Ecer Certification：
Verified Supplier
Dongxin Chemical is an integrated group company whose main business range covers amino moulding compound and melamine tableware. Headquartered in Ganzhou, Jiangxi, with branch factories in Jiexi of Guangdong, Guilin of Guangxi and Shaowu of Fujian, the company covers an area of 700,000 square meters... Dongxin Chemical is an integrated group company whose main business range covers amino moulding compound and melamine tableware. Headquartered in Ganzhou, Jiangxi, with branch factories in Jiexi of Guangdong, Guilin of Guangxi and Shaowu of Fujian, the company covers an area of 700,000 square meters...
Get in touch with us
Leave a Message, we will call you back quickly!