NVIDIA Mellanox MCP1600-E003E26 100Gb/s QSFP28 Passive DAC Cable 3m EDR

Cost-effective 3-meter passive copper cable delivering 100Gb/s throughput for EDR InfiniBand and 100GbE applications—featuring near-zero power consumption, ultra-low latency, and robust signal integrity for short-reach data center interconnects.

• 100Gb/s aggregate bandwidth over 4x 25Gb/s NRZ lanes per direction
• 3-meter length with 26AWG conductors, black LSZH jacket
• Supports InfiniBand EDR (100Gb/s) and 100 Gigabit Ethernet
• Near-zero power consumption (<0.1W) | Bit Error Rate better than 1E-15
• Hot-pluggable QSFP28 form factor, SFF-8665 compliant, RoHS compliant

• 100Gb/s Throughput: Four 25Gb/s NRZ channels per direction, aggregate 100Gb/s full duplex.
• Passive Copper Design: No active components—lowest cost, zero latency, and virtually zero power draw.
• 26AWG Conductors: Optimized for 3-meter reach with excellent signal integrity.
• Protocol Agnostic: Supports InfiniBand EDR and 100GbE with auto-negotiation.
• Rigorous Testing: 100% production tested for BER <1E-15 with Mellanox systems.

The MCP1600-E003E26 complies with SFF-8665 (QSFP28 electrical) and SFF-8636 (management interface). It uses 4x 25Gb/s NRZ modulation over twinax copper pairs. Supports InfiniBand EDR (IBTA 1.3) and 100GBASE-CR4 Ethernet. Integrated EEPROM provides product identification via I²C. RoHS compliant with LSZH jacket.

As a passive direct attach copper cable, the MCP1600-E003E26 relies on high-quality 26AWG twisted pairs and precision impedance matching (100Ω differential) to transmit 25Gb/s NRZ signals up to 3 meters without active amplification. The cable's construction minimizes skew and crosstalk, while the EEPROM provides host devices with configuration data (length, vendor, equalization hints). The result is a zero-latency, near-zero power link ideal for short-reach intra-rack connections.

• InfiniBand EDR Fabrics: Connect QM8700/QM8790 switches to ConnectX-5/6 adapters within racks.
• 100GbE Networks: Link Spectrum switches to servers or storage nodes up to 3m apart.
• Top-of-Rack to Server: Short-reach intra-rack connections with minimal power and cost.
• Storage Clusters: RDMA over Converged Ethernet (RoCE) and NVMe-oF deployments.

Note: Operating temperature 0°C to 70°C, storage -40°C to 85°C. Minimum single bend radius: 47mm (5x diameter). Repetitive/assembly bend radius: 94mm (10x diameter).

• vs. Active Optical Cables (AOC): Significantly lower cost, zero power consumption, and no cleaning required.
• vs. Active Copper (ACC): Lower cost and zero power—ideal for very short reaches ≤3m.
• Proven Reliability: BER better than 1E-15 with Mellanox systems ensures error-free transmission.
• Thicker 26AWG: Better signal integrity at 3m compared to 30AWG cables.

We offer 24/7 technical consultation, RMA services, and cabling infrastructure design support. Each MCP1600-E003E26 is backed by a 1-year limited hardware warranty and 100% factory testing. Our inventory ensures same-day dispatch for in-stock items. Pre-sales support for compatibility verification with ConnectX adapters and Quantum switches is available.

• ESD Sensitivity: Use grounded wrist straps when inserting into QSFP cages. Connectors are shipped with protective caps—remove only immediately before installation.
• Bend Radius: Do not exceed minimum bend radius (47mm single, 94mm repetitive). Avoid sharp bends near connectors.
• Operating Temperature: Ensure ambient temperature within 0°C–70°C.
• Storage: Store in clean, dry environment between -40°C and 85°C.
• Compatibility: Verify connector type (QSFP28) matches your equipment.

With over a decade of experience, we operate a large-scale factory backed by a strong technical team. Our extensive customer base and domain expertise enable us to offer competitive pricing without compromising on quality. As authorized distributors for Mellanox, Ruckus, Aruba, and Extreme, we stock original network switches, network card (nic card) solutions, wireless Access Points, controllers, and cabling. We maintain a 10 million USD inventory to ensure rapid fulfillment across diverse product lines. Every shipment is verified for accuracy, and we provide 24/7 consultation and technical support. Our professional sales and technical teams have earned a high reputation in global markets—partner with us for reliable infrastructure solutions.