NVIDIA mellanox MFP7E10-N010 10m MPO-12/APC Multimode Fiber Optic Cable – Type-B

NVIDIA MFP7E10-N010 10m MPO-12/APC Multimode Fiber Optic Cable

Reliable 10-meter MPO-12/APC to MPO-12/APC multimode fiber cable with 8 active fibers—engineered for 800G twin-port OSFP and 400G QSFP112 optical transceivers in InfiniBand NDR and 400GbE data center infrastructures.

• MPO-12/APC female to MPO-12/APC female, 8-fiber Type-B crossover configuration
• 10-meter length with 3.0mm diameter, LSZH aqua jacket (OM4 multimode)
• Supports 800Gb/s twin-port OSFP and 400Gb/s OSFP/QSFP112 transceivers
• Angled Physical Contact (APC) 8° polish for minimal back reflection
• Insertion loss ≤0.35 + 0.0004*L dB, Return loss ≥35dB

Characteristics

• 8-Fiber Type-B Crossover: Fiber 1 connects to fiber 12 at opposite end—ensuring correct Tx-to-Rx alignment per transceiver pinout.
• APC Polish: 8-degree angled end face reduces back reflections, critical for signal integrity at 100G PAM4 per lane.
• OM4 Multimode Fiber: 50/125µm fibers optimized for 10m reach with low insertion loss; aqua jacket for easy identification.
• LSZH Jacket: Low Smoke Zero Halogen material for enhanced safety in data center environments.
• Rigorous Testing: 100% insertion loss and return loss tested for reliable out-of-box performance.

Technology & Standards

The MFP7E10-N010 complies with IEC 61754-7 (MPO connector family), GR-1435, and ANSI/TIA/EIA 604-5. It uses 8 active multimode fibers (50/125µm OM4) with APC 8° polish. The Type-B crossover wiring ensures correct Tx-to-Rx alignment. Suitable for InfiniBand NDR, 400GbE, and NVLink protocols when used with compatible optical modules (MMA4Z00-NS, MMA1Z00-NS).

Working Principle: Optical Crossover with APC

In a twin-port OSFP 800G transceiver, two 4-lane optical interfaces transmit and receive over separate fibers. The MFP7E10-N010 uses a Type-B crossover scheme: fiber 1 at end A connects to fiber 12 at end B, fiber 2 to fiber 11, etc. This ensures that the transmit laser from lane 1 aligns with the photodetector of lane 12 at the far end. The 8° angled polish (APC) directs any reflected light away from the laser cavity, preventing signal distortion and maintaining low bit error rates at 100G PAM4 per lane.

Applications & Deployment

• Quantum-2 Switch to Switch: Connect twin-port OSFP 800G switches up to 10m apart.
• Switch to ConnectX-7/BlueField-3: Link ToR switches to 400G adapters (OSFP or QSFP112).
• NVLink Fabrics: Optical interconnection for GPU clusters using NVLink over fiber.
• Hyperscale Data Centers: Short-reach rack-to-rack optical links with patch panels.

Technical Specifications & Ordering Options

Note: Operating temperature 0°C to 70°C, storage -40°C to 85°C. Minimum bend radius 30mm. Type-B crossover per IEC 61754-7.

Advantages & Differentiators

• vs. Copper Cables: Longer reach (10m) with lower weight, better airflow, and EMI immunity.
• APC Polish: Superior return loss (≥35dB) compared to UPC, critical for 100G-PAM4 links.
• Type-B Crossover: Plug-and-play compatibility with NVIDIA transceivers—no need for manual crossover.
• OM4 Performance: Optimized for 10m reach with minimal insertion loss, supporting future 800G upgrades.

Service & Support

We offer 24/7 technical consultation, RMA services, and cabling infrastructure design support. Each MFP7E10-N010 is backed by a 1-year warranty and 100% factory testing. Custom lengths available for volume orders. Our inventory ensures same-day dispatch for in-stock items. Pre-sales support for transceiver compatibility verification is available.

Frequently Asked Questions (FAQ)

Q: What transceivers is this cable compatible with?

A: It is designed for NVIDIA MMA4Z00-NS (twin-port OSFP DR8), MMA4Z00-NS400 (OSFP), and MMA1Z00-NS400 (QSFP112) optical modules used in ConnectX-7 and BlueField-3.

Q: Can I use this cable with MPO/UPC connectors?

A: No. APC (angled) and UPC (ultra polish) connectors have different end faces and will not mate correctly—always use APC with APC.

Q: What is the difference between Type-B and straight cables?

A: Type-B crossover (fiber 1 to 12) matches the pinout of optical transceivers where transmitter lane 1 aligns with receiver lane 12 at the far end. Straight cables (Type-A) are for other applications like parallel optics with same pin layout.

Q: Is this cable compatible with 400G Ethernet?

A: Yes, it supports 400GBASE-SR8 and 800GBASE-SR8 when used with appropriate 400G/800G optical modules.

Q: What is the minimum bend radius during installation?

A: The minimum bend radius is 30mm anywhere on the cable. Avoid sharp bends near connectors.

Precautions & Handling Guidelines

• Clean Before Use: Always clean MPO connectors with appropriate one-click cleaners before insertion—contamination causes link errors.
• Dust Caps: Keep protective caps on until moment of installation; store caps for future use.
• ESD Awareness: Although the cable is passive, it plugs into ESD-sensitive transceivers—use grounded wrist straps.
• Bend Radius: Do not exceed 30mm bend radius; avoid tension on connectors.
• Compatibility: Verify transceiver type (APC vs UPC) before ordering—this cable is APC only.

Company Introduction

With over a decade of experience, we operate a large-scale factory backed by a strong technical team. Our extensive customer base and domain expertise enable us to offer competitive pricing without compromising on quality. As authorized distributors for Mellanox, Ruckus, Aruba, and Extreme, we stock original network switches, network card (nic card) solutions, wireless Access Points, controllers, and cabling. We maintain a 10 million USD inventory to ensure rapid fulfillment across diverse product lines. Every shipment is verified for accuracy, and we provide 24/7 consultation and technical support. Our professional sales and technical teams have earned a high reputation in global markets—partner with us for reliable infrastructure solutions.