Shenzhen Merrytek Technology Co., Ltd.
| Stand-by Power | ≤0.5W |
| installation height | 3m (6m Max) |
| Payment Terms | T/T |
| Supply Ability | 10000 pcs/month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 4-5 weeks after receiving deposit. |
| Packaging Details | Bubble bag+Clapboard + Carton(K=A) |
| lifetime | 5 years warranty@Ta |
| Output Signal | ON/OFF |
| Rated voltage | 220-240Vac 50/60Hz |
| working frequency | 5.8GHz ±75MHz, ISM band |
| Brand Name | Merrytek |
| Model Number | MC098S 99 2 |
| Certification | CE, RED |
| Place of Origin | Shenzhen, China |
View Detail Information
Explore similar products
MC098S 99 On Off Function Sensor With Antithetical Dipoles Antenna / Adaptive
5.8GHz On Off Microwave Light Sensor 220 - 240VAC Operated
Flood Light On Off Function Sensorr 220V-240V Input
Low Impedance Antenna Microwave Sensor MC090S E
Product Specification
| Stand-by Power | ≤0.5W | installation height | 3m (6m Max) |
| Payment Terms | T/T | Supply Ability | 10000 pcs/month |
| Delivery Time | 1, Sample and small order: Within 5 working days after receiving your payment. 2, Bulk order: 4-5 weeks after receiving deposit. | Packaging Details | Bubble bag+Clapboard + Carton(K=A) |
| lifetime | 5 years warranty@Ta | Output Signal | ON/OFF |
| Rated voltage | 220-240Vac 50/60Hz | working frequency | 5.8GHz ±75MHz, ISM band |
| Brand Name | Merrytek | Model Number | MC098S 99 2 |
| Certification | CE, RED | Place of Origin | Shenzhen, China |
【Product Features】
【Parameters】
| Input | ||
| Rated Voltage | 220-240Vac 50/60Hz | |
| Stand-by Power | ≤0.5W | |
| Surge Test | 1KV(L/N,EN61000-4-5) | |
| Output | ||
| Output Signal | ON/OFF | |
| Type of Load | Inductive or Resistive | |
| Load Capacity | 200W@230Vac(Inductive) ; 400W@230Vac(Resistive) | |
| Max. Surge Capacity | 7A relay 20A(50% Ipeak, twidth =200uS, 230Vac full load, cold start); | |
| Sensor Parameters | ||
| Working Frequency | 5.8 GHz ±75MHz, ISM wave band | |
| Transmitting Power | 1mW Max. | |
| Detection Area(Radius) | Ceiling mounting height 3m: r≥4m@0.3m/s, r≥2.5m@1m/s; Wall mounting height 3m: r≥5m@0.3m/s, r≥4m@1m/s Test condition: Set 100% sensitivity, open 60㎡ indoor area. | |
| Mounting Height | 3m (6m Max) | |
| Hold time | 5s/30s/90s/5min/20min/30min (Dial code) 5s/30s/1min/3min/5min/10min/20min/30min (MH10 setup) | |
| Detection Area | 100%/75%/50%/25% | |
| Daylight Sensor | Normal Daylight | 2Lux/10Lux/30Lux//50Lux/Disable 5Lux/15Lux/30Lux/50Lux/100Lux/150Lux/Disable (MH10setup) |
| Operating Temperature | -25℃…+60℃ | |
| Storage Temperature | -40~80℃ Humidity: ≤85% non-condensing | |
| Certificate Standards | ||
| Certified | CE, RED | |
| Environmental Requirements | Comply with RoHS 2.0 Reach | |
| IP Rating | IP20 | |
| Other | ||
| Remote Model | MH10; MH16; MH03 | |
| Wiring | Press-in Type Terminals, wire diameter: 0.5-0.75mm2 | |
| Installation | Built-in | |
| Package | Bubble bag+Clapboard + Carton(K=A) | |
| Net Weight | 40.3±3g | |
| Lifetime | 5 years warranty@Ta | |
【Function】
| ON/OFF function | Light control Disable or external brightness value is lower than the set value. When the microwave sensors detects the movement of an object, the sensor triggers and enters the light-on state. It maintains the light-on state after a delay and then enters the light-off state. |
| Two-step dimming function | N/A |
| Three-step dimming function | N/A |
| Daylight harvesting | N/A |
| Daylight priority | N/A |
【Product Information】
Antenna installation tips
Suggestion: The bottom Angle of the light plate from the microwave antenna should be higher than 2mm, otherwise the induction distance will become closer
【DIP Switch Setting】
| Function | Daylight Sensor | Hold Time | Detection Area | ||||||||
| Dial code | 1 | 2 |
3 | Daylight Sensor Threshold | 4 | 5 | 6 | Hold time | 7 | 8 | Detection area |
| Ⅰ | ON | ON | ON | 2Lux | ON | ON | ON | 5S | ON | ON | 100% |
| Ⅱ | - | ON | ON | 10Lux | ON | ON | - | 30S | ON | - | 75% |
| Ⅲ | - | ON | - | 30Lux | ON | - | ON | 90S | - | ON | 50% |
| Ⅳ | - | - | ON | 50Lux | ON | - | - | 5min | - | - | 25% |
| Ⅴ | - | - | - | Disable | - | ON | ON | 20min | N/A | N/A | N/A |
| Ⅵ | N/A | N/A | N/A | N/A | - | - | - | 30min | N/A | N/A | N/A |
【MH10 Remote Control】
The sensor should be installed by a professional electrician. Please turn off the power before installing, wiring, changing the setting of the DIP switch.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Employee Number:
200~300
Ecer Certification：
Verified Supplier
Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co... Focus on intelligent lighting control and innovate constantly！ About Merrytek Shenzhen Merrytek Technology Co. Ltd, founded in 2011 in Shenzhen China. For more than 13 years, we have been dedicated to research electronical products for professional lighting & smart co...
Get in touch with us
Leave a Message, we will call you back quickly!