Huanghua Fangzheng Welding Equipment CO., Ltd
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 50 sets per month |
| Delivery Time | 30 days |
| Packaging Details | Plastic films or can be customized. |
| Type | Cantilever Mesh Stacking Wire Mesh Container Welding Machine |
| After-sales Service Provided | Engineers available to service machinery overseas |
| Voltage | 220V/380V/415V/440V |
| Wire diameter range | 3-6mm |
| Mesh hight | 1600mm |
| Mesh hole size | 50*50mm |
| Welding speed | 40-60times/min |
| Machinery Test Report | Provided |
| Key Selling Points | Fully automatic |
| Color | Gray and yellow |
| Brand Name | FZ |
| Model Number | DNW-16Q |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Full Auto Bending Fence Mesh Welding Machine Cross Wire 50-200mm Adjustable
150KVA Welding Mesh Machine With Online Bending For Fence Panel
Automatic Pneumatic Fence Mesh Welding Machine For Reinforcing Rebar Panel
Automatic 3-6mm Electric Welding Machine 3D Fence With Bending
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 50 sets per month |
| Delivery Time | 30 days | Packaging Details | Plastic films or can be customized. |
| Type | Cantilever Mesh Stacking Wire Mesh Container Welding Machine | After-sales Service Provided | Engineers available to service machinery overseas |
| Voltage | 220V/380V/415V/440V | Wire diameter range | 3-6mm |
| Mesh hight | 1600mm | Mesh hole size | 50*50mm |
| Welding speed | 40-60times/min | Machinery Test Report | Provided |
| Key Selling Points | Fully automatic | Color | Gray and yellow |
| Brand Name | FZ | Model Number | DNW-16Q |
| Certification | CE | Place of Origin | China |
| High Light | 220v wire mesh welding machine ，stacking container wire mesh welding machine ，cantilever mesh welding machine | ||
Cantilever Mesh Stacking Wire Mesh Container Welding Machine
Notes during operation
Watch the touch screen to see if it shows normal. When the alarm occurs, first see the contents of the alarm, and then follow the instructions to check the relevant parts and resolve.
Pay attention to whether the wire throwing part can work properly, if not normal must adjust the equipment in time, otherwise it will cause the cross wire throwing is not in place, the mesh lack of silk phenomenon.
Pay attention to the sound of welding, normally there is a slight sound. When the welding sound is large and the spark spatter is serious, it may be caused by the following reasons:
① There is rust or oil stain on the surface of the wire.
② The welding pressure is too small and the transformer gear is too high.
③ upper and lower contacts have oil stain.
Pay attention to check the solder joint, the strong solder joint diameter wire and weft wire down pressure is about 15%, and the long wire and cross wire contact with the upper and lower electrodes should not deform.
| No. | Item Name | Parameter | Note |
| Power condition | Voltage and Frequency | 380V 3phase 50HZ | Intelligent circuit breaker is not suggested the distance to the transformer≦50m |
| Outer voltage range | ±10% | ||
| Outer transformer | 250KVA | ||
| Cable specification | 180mm²*3 Pin Cooper wire | ||
| Air condition | Air compressor | screw type | 0.6-0.8mpa Distance 3m |
| Air production | 3.4m³/min | ||
| Air tank capacity | 1m³ | Around machine | |
| Cooling | Water pool capacity | 1m³ | Clean water for industry |
| Lifting distance ,Water pressure | 0.2-0.3mpa 25-30m Lifting |
This device is the core part of Cantilever Mesh Stacking Wire Mesh Container Welding Machine. It is mainly to weld the meshes at a high speed by cooperating closely with others device.
The welding electrodes head of Cantilever Mesh Stacking Wire Mesh Container Welding Machine use high-quality materials, which make them more wearable and with better conductive, and also have a long life, reduce production costs.
The improvement of design of welding transformers of Fence Mesh Welding Machine meets the demand to weld continuously wires of 6+6mm at a high speed at the moment when saving energy.
Fence Mesh Welding Machine electrodes adopt circulating water cooling, which extends their service lives, and ensures the long-term operation of the equipment.
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2008
Total Annual:
10000000-20000000
Employee Number:
100~500
Ecer Certification：
Site Member
Huanghua Fangzheng Welding Equipment Co,.Ltd is located in Hanghua City, Hebei Province of China. There is a thirty-year history of making the mesh welding machines in Huanghua City. Our company has rich experience of developing and making mesh welding equipments and a specialized team with top tech... Huanghua Fangzheng Welding Equipment Co,.Ltd is located in Hanghua City, Hebei Province of China. There is a thirty-year history of making the mesh welding machines in Huanghua City. Our company has rich experience of developing and making mesh welding equipments and a specialized team with top tech...
Get in touch with us
Leave a Message, we will call you back quickly!