Y81T-160A UBC Can Baler with 160 Ton Compaction Force, PLC Automatic Control,

Product Specification

Y81T-160A UBC Can Baler with PLC Automatic Control

Meta Description
Y81T-160A UBC can baler with 160 ton force, PLC control, 300×300 mm bale size, and side push-out discharge for efficient aluminium can recycling.

H1
Y81T-160A UBC Can Baler with PLC Automatic Control

Intro

Why Loose Cans Are Hard to Manage
UBC cans are lightweight, but they occupy a large amount of space before compression. For recycling stations and can collection centers, loose cans can quickly fill storage areas and reduce transport efficiency.

Why Baling Helps
A UBC can baler helps compress loose cans into compact bales, making them easier to stack, store, and move. This improves yard organization and helps create a more efficient aluminium can recycling process.

H2: Key Specifications

160 Ton Compaction Force
The Y81T-160A is equipped with a 160 ton main pressure system, providing 1600 KN of nominal thrust. This gives the machine practical compaction strength for loose can handling and similar light scrap applications.

Useful Chamber Size
Its 1500 × 700 × 600 mm material box offers a suitable feeding space for can recycling work. This size allows operators to handle loose material more efficiently during daily operation.

Compact Bale Output
The machine produces 300 × 300 mm bales, which helps create a regular and transport-friendly bale format. A compact bale is easier to store, move by forklift, and load for shipment.

Automatic Control System
The machine uses PLC automatic control and can also operate with a remote controller. This makes operation more convenient and helps improve consistency during repeated work cycles.

Hydraulic and Power System
The working pressure is 25 MPa, and the machine is powered by a 22 kW motor. This combination supports stable hydraulic performance during normal operation.

Cycle and Discharge Design
The empty-load cycle time is about 110 seconds, and the machine uses a side push-out discharge system. This helps users understand both the working rhythm and the bale removal method.

H2: Suitable Applications

Can Recycling Centers
This machine is suitable for UBC collection stations and aluminium can recycling facilities that need to reduce loose material volume before shipment.

Non-Ferrous Scrap Handling
It can also be used in non-ferrous scrap yards where operators need compact bale output for daily management and transport preparation.

Space-Saving Yard Operations
For sites where storage space is limited, compacting cans into standard bales can make material handling more efficient and reduce clutter in the work area.

H2: Why Choose Y81T-160A

Practical for Daily Can Recycling
The Y81T-160A is a good fit for users who want a practical baler for routine can compaction without moving to a much larger system.

Automatic and Easy to Operate
PLC automatic control helps improve working consistency, while the remote controller adds convenience in daily use.

Compact and Consistent Bale Handling
The 300 × 300 mm bale output and side push-out structure make finished bales easier to handle and remove.

FAQ

Q1: Is this machine suitable for UBC cans?
Yes. It is suitable for compressing loose cans and similar light recyclable materials into compact bales.

Q2: What is the standard bale size?
The standard bale size is 300 × 300 mm.

Q3: Does it support automatic control?
Yes. The machine uses PLC automatic control.

Q4: What is the motor power?
It is equipped with a 22 kW motor.

Q5: What discharge method does it use?
It uses side push-out bale discharge.

CTA

If you need a more organized way to handle loose cans, the Y81T-160A UBC can baler offers practical pressure, automatic control, and compact bale output for daily recycling operations.