DWR Bearing Co., Ltd
| Payment Terms | TT |
| Place of Origin | CHINA |
| Model Number | 42306 |
View Detail Information
Explore similar products
Brass Sealed Cylindrical Roller Bearings , P6 Radial Cylindrical Roller Bearings
High Speed NSK Cylindrical Roller Bearing For Internal Combustion Engine
Stainless Steel NSK Cylindrical Roller Bearing With Single Row Customized Size
Steel Full Complement Cylindrical Roller Bearings For Locomotives 50mm Bore
Product Specification
| Payment Terms | TT | Place of Origin | CHINA |
| Model Number | 42306 | ||
| High Light | sealed cylindrical roller bearings ，axial cylindrical roller bearings | ||
Cylindrical Roller Thrust Bearing / Radial Cylindrical Roller Bearings
Product Introduction:
In bearings of this type, the cylindrical rollers are in linear contact with the raceways. They have a high radial load capacity and are suitable for high speeds.
There are different types designated as NU, NJ, NUP, N, NF (for single-row bearings), NNU, and NN (for double-row bearings depending on the design or absence of side ribs).
The outer and inner rings of all types are separable.
Some cylindrical roller bearings have no ribs on either the inner or outer ring, so the rings can move axially relative to each other. These can be used as free-end bearings. Cylindrical roller bearings, in which either the inner or outer rings has two ribs and the other ring has one, are capable of taking some axial load in one direction Double-row cylindrical roller bearings have high radial rigidity and are used primarily for precision machine tools.
Application:
These bearings are the most common type and are used in a wide variety of applications. Such as Steel Industry , Mining & Construction , Papermaking Machinery , Wind Turbines , Machine Tools , Gearboxes , Electric Motors , Pumps & Compressors , Injection Molding , Motorcycles , Railways, etc.
The ring and balls are made of refining bearing steel Gcr15(AISI52100,the retainer are punched from brass strip(H62) or top quality cold-rolled strip(spcc BQ B402)and reinforced plastics are available if necessary.The shield is made by phosphatzing steel skeleton and butyronitrile rubber with hot pressed .
The rings and balls of stainless stell bearings are made by refining stainless stell 9Cr18(AISI440c).
Features of Cylindrical Roller Bearing
1. High radial load capacity,is suitable for heavy load and impact load.
2. Small friction, suitable for high speed,the limiting Speed is close to Deep Groove Ball Bearings
3. N,NU series can adapt to high temperature and allow error during installation.
4. inner ring and outer ring are separable,easy to install and take down
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1998
Total Annual:
1000000-2000000
Employee Number:
50~100
Ecer Certification：
Active Member
DWR Bearing Co., Ltd. was founded in 1998, after more than 10 years of development, nowadays has become into a group corporation with several subsidiaries. Our factory covers an area of 30, 000 square meters, construction area of 19, 000 squre meters, along with advanced production line and modern t... DWR Bearing Co., Ltd. was founded in 1998, after more than 10 years of development, nowadays has become into a group corporation with several subsidiaries. Our factory covers an area of 30, 000 square meters, construction area of 19, 000 squre meters, along with advanced production line and modern t...
Get in touch with us
Leave a Message, we will call you back quickly!