DWR Bearing Co., Ltd
View Detail Information
Explore similar products
Less Coefficient Friction Angular Contact Ball Bearing Subjected To Both Radial
Back To Back Angular Contact Bearings / Skf Double Row Angular Contact Bearings
High Precision Angular Contact Ball Bearing QJ 213 Series With Less Coefficient
High Precision 4 Point Angular Contact Ball Bearing , Single Row Angular Contact
Product Specification
| High Light | double row angular contact bearing ，sealed angular contact bearings | ||
Angular contact bearings are able to support radial load and axial load,or just axial load,and can work under high speed.
single row angular contact ball bearings can only support axial load in single direction, in bear radial load,will cause additional axial force,and can only limit the axial displacement of the shaft or housing in one direction.If pairs of double installation,the bearing outer ring relatively wide end face of wide and narrow end facing the narrow end.This can avoid additional axial force,and the shaft or housing to limit the range of the axial clearance in both directions.Angular contact ball bearing was more balls than deep groove ball bearing,so the load bearing capacity is the highest in all ball bearing,and it has strong rigidity,rotate stable.It can also through the inner and outer rings relative displacement on the radial clearance.
Features of angular contact ball bearing:
(1)Angular contact ball bearings are particularly suitable for carrying combined (axial and radial) loads. Sometimes, they also can carry pure axial load and operate in higher speed. Under radial load, axial component force will be produced which must be counteracted. So the bearings are normally adjust against a second bearing.
(2)Single row angular contact ball bearings can carry axial load acting in one direction only. In many applications, angular contact ball bearings in pairs or muti-arrangement should be used. The axial load carrying capacity of angular contact ball bearings increase with the increase of contact angle.
(3)Angular contact ball bearings have raceways in the inner and outer rings that are displaced with respect to each other in the direction of the bearing axis. This means that they are designed to accommodate combined loads, i.e.simultaneously acting radial and axial loads.
1.) Specification:
Double row angular contact ball bearings with Flange
Model:616628B
Size: 35x77x22mm
Unit Net Weight: 0.46 kgs
2.) Types:
3.) Manufacturing Standard
|
Precision Rating |
ABEC-1(p0) ABEC-3(p6) ABEC-5(p5) ABEC-7(p4) |
|
Seals Type |
Open, Z,ZZ,RS,2RS; DDU, LLU |
|
Material |
Bearing steel, carbonsteel,stainless steel |
|
Bearing steel standard |
GCr15, 100Cr6 |
|
Vibration Level Code |
V1,V2.V3 |
|
Radial Play(Clearance) |
C0,C2,C3,C4,C5 |
|
Noise Level |
Z1,Z2,Z3,Z4 |
|
Service support |
customization,OEM |
4. ) Applications:
These bearings are mainly applied in the machine tool spindles, high-frequency motors, gas turbines, oil pumps, air compressors, printing machines and other installations.
5.) Transportion:
A. by Express--- DHL, TNT, UPS, FEDEX, ARAMEX
B. by Air ---- FOB, CNF, CFR
C. by Sea ---- FOB, CNF, CFR, CIF
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1998
Total Annual:
1000000-2000000
Employee Number:
50~100
Ecer Certification：
Active Member
DWR Bearing Co., Ltd. was founded in 1998, after more than 10 years of development, nowadays has become into a group corporation with several subsidiaries. Our factory covers an area of 30, 000 square meters, construction area of 19, 000 squre meters, along with advanced production line and modern t... DWR Bearing Co., Ltd. was founded in 1998, after more than 10 years of development, nowadays has become into a group corporation with several subsidiaries. Our factory covers an area of 30, 000 square meters, construction area of 19, 000 squre meters, along with advanced production line and modern t...
Get in touch with us
Leave a Message, we will call you back quickly!