Product Specification

1060 H14 Aluminum Coil for Flashing

Aluminum Coil · 1060 / 3003 / 5052 · 0.2–6.0 mm · Slitting & Cut-to-Length Available

Product Summary

Aluminum Coil is a mill-finish aluminum coil available in three alloy families — 1060 (commercially pure aluminum), 3003 (Al-Mn alloy) and 5052 (Al-Mg alloy) — from 0.2 to 6.0 mm thick and 800 to 1500 mm wide.

Each alloy is supplied in the temper matched to its composition and to your downstream forming or structural application, so the mechanical state suits the process rather than being a single value applied across all grades.

Kyzotech supplies aluminum coils in the alloy and temper matched to your application, with slitting and cut-to-length services, export packing, mill certificates and material traceability on request.

Differentiator: 1060 H14 alloy for flashing.

Key Specifications

Alloy & Temper

Dimensions & Delivery

Standards

Key Features

• Alloy matched to application — 1060 for general use and electrical/chemical applications; 3003 for corrosion-resistant forming; 5052 for higher-strength structural and marine-service environments.
• Temper matched to alloy — each alloy is offered in its own temper range, so the mechanical state suits the downstream process.
• Wide thickness range — 0.2 to 6.0 mm across a broad alloy and temper range.
• Slitting & cut-to-length — supplied to your exact width and length, reducing downstream handling.
• Traceable material — mill test certificates and batch identification available according to order requirements.

Applications

Applications (by alloy)

• 1060 (pure aluminum) — general sheet-metal work, decorative trim, and applications where high electrical or thermal conductivity and corrosion resistance are required.
• 3003 (Al-Mn) — roofing, wall cladding, corrugated panels, flashing and general forming where moderate strength and good workability are needed.
• 5052 (Al-Mg) — higher-strength structural roofing, cladding and components exposed to marine or industrial environments.

Why Choose Kyzotech

• Flexible grade and mill matching — matched to your end use and target cost, not locked to a single brand or specification.
• Traceable raw materials — coils and materials sourced from qualified mills, with mill certificates available according to order requirements.
• Downstream processing support — slitting, cut-to-length and processing coordinated with the downstream product.
• Export-oriented packing — seaworthy packaging designed to reduce surface and edge damage during ocean transport.

Quality Control

• Incoming raw material inspection
• Dimensional and surface verification
• Third-party inspection available on request

Packaging & Delivery

Seaworthy export packing to protect surfaces and edges during ocean transport. Typical lead time is 20–30 days after commercial confirmation, depending on order quantity and mill arrangements. Shipment can be arranged from Shanghai, Tianjin, Qingdao or Weifang.

About Kyzotech

Kyzotech is the export brand of Nanjing Shunshuo New Material Technology Co., Ltd. — a manufacturer of steel structure building materials and enclosure systems, established in 2016.

Kyzotech is our export brand; our website and email are hosted at metalroofsystems.com.

FAQ

Q1: Is this supplied as a standard stock item? Supplier / Manufacturer

Q2: Can you customize to my project requirements? Yes. Grade, dimension, coating and processing can be matched to your drawings and application requirements.

Q3: What documentation do you provide? Mill test certificates, packing list and shipment documents. Third-party inspection can be arranged on request.

Q4: What is your MOQ and lead time? MOQ and lead time are confirmed per grade and specification; typical lead time is 20–30 days.

Request a Quote

Send us your grade, dimension, quantity, coating requirement and destination port.