ASTM B337/ASTM B338 Grade 2 Titanium Pipe And Seamless Tubes Titanium Alloy Tube

Product Specification

ASTM B337/ASTM B338 Grade 2 Titanium Pipe And Seamless Tubes Titanium Alloy Tube
 
Introduction of Titanium Tube Grade 2:

ASTM B337 and ASTM B338 are standards that outline the requirements for titanium and titanium alloy pipes and tubes, respectively. Here's an overview of Grade 2 titanium pipe specifications according to these standards:

ASTM B337 Grade 2 Titanium Pipe:

• Chemical Composition: Grade 2 titanium typically contains 99.2% pure titanium, with small amounts of oxygen (maximum 0.25%) and iron (maximum 0.30%).

• Mechanical Properties:

  • Tensile Strength: Minimum 50 ksi (345 MPa)
  • Yield Strength: Minimum 40 ksi (275 MPa)
  • Elongation: Minimum 20%

• Dimensions:

  • Outer Diameter (OD): Varied sizes as per specific requirements.
  • Wall Thickness: Varied sizes as per specific requirements.
  • Length: Typically available in standard lengths or cut to custom lengths as needed.

• Applications: Widely used in industries such as chemical processing, aerospace, marine, and medical due to its excellent corrosion resistance, formability, and weldability.

ASTM B338 Grade 2 Titanium Tube:

• Chemical Composition: Similar to Grade 2 titanium pipe.

• Mechanical Properties:

  • Generally conforms to the same tensile and yield strength requirements as ASTM B337 Grade 2.

• Dimensions:

  • Typically specified with exact OD, wall thickness, and length requirements.
  • Commonly available in seamless and welded forms depending on application needs.

• Applications: Similar to Grade 2 pipe, used in various industries where corrosion resistance, lightweight properties, and biocompatibility are essential.

Key Features of Grade 2 Titanium:

• Corrosion Resistance: Excellent resistance to corrosion in oxidizing and mildly reducing environments.
• Formability: Easily fabricated, welded, and machined.
• Biocompatibility: Non-toxic and biologically inert, suitable for medical implants and surgical instruments.
• High Strength-to-Weight Ratio: Stronger than many steels but with low density, making it lightweight yet durable.

Grade 2 Titanium Tube Specifications:

Different Grades of Titanium:

Titanium alloys are categorized into different grades, each offering unique properties suited for various applications. Here are some common grades of titanium and their characteristics:

Grade 1 (CP-1 Titanium):

• Composition: Pure titanium (99.5% titanium).
• Characteristics: Excellent corrosion resistance, good formability, and weldability. It is the most ductile and softest titanium grade.

Grade 2 (CP-2 Titanium):

• Composition: Pure titanium (99.2% titanium).
• Characteristics: Similar to Grade 1 but with slightly higher strength. It offers excellent corrosion resistance in highly oxidizing to mildly reducing environments.

Grade 3 (CP-3 Titanium):

• Composition: Pure titanium (98.9% titanium).
• Characteristics: Stronger and less formable than Grades 1 and 2. It has excellent weldability and corrosion resistance.

Grade 4 (CP-4 Titanium):

• Composition: Pure titanium (98.6% titanium).
• Characteristics: Higher strength than Grades 1, 2, and 3. It offers good weldability and corrosion resistance.

Grade 5 (Ti-6Al-4V):

• Composition: Titanium alloy (6% aluminum, 4% vanadium, balance titanium).
• Characteristics: High strength and toughness, excellent corrosion resistance, and heat resistance up to 400°C (750°F). Widely used in aerospace, marine, and medical industries.

Grade 7 (Ti-0.15Pd):

• Composition: Titanium alloy (0.15% palladium, balance titanium).
• Characteristics: Excellent corrosion resistance in reducing and mildly oxidizing environments. It has good weldability and formability.

Grade 9 (Ti-3Al-2.5V):

• Composition: Titanium alloy (3% aluminum, 2.5% vanadium, balance titanium).
• Characteristics: High strength, good corrosion resistance, and weldability. Used in aerospace, marine, and chemical processing industries.

Grade 12 (Ti-0.3-Mo-0.8Ni):

• Composition: Titanium alloy (0.3% molybdenum, 0.8% nickel, balance titanium).
• Characteristics: Good weldability and corrosion resistance, particularly in highly oxidizing environments.

Chemical Composition of ASME SB338 Ti Gr 2 Seamless Pipe: