Class 300 Long Weld Neck Flange Raised Face Comparison of Titanium Grade 2 Grade

Product Specification

Class 300 Long Weld Neck Flange Raised Face: Comparison of Titanium Grade 2, Grade 5, Grade 7, Carbon Steel, and Stainless Steel

Introduction:

Introduction

The Class 300 Long Weld Neck Flange Raised Face is widely used in industrial piping systems to connect pipes securely and handle various operating conditions. These flanges come in multiple materials, including Titanium Grades 2, 5, and 7, as well as Carbon Steel and Stainless Steel. Each material offers distinct advantages in terms of strength, corrosion resistance, and suitability for specific applications. Understanding these differences is essential when selecting the right flange material for a particular application.

This article explores the properties and advantages of these materials, and a comparison table will be provided to highlight the key differences between Titanium Grades 2, 5, 7, Carbon Steel, and Stainless Steel.

Material Characteristics and Comparison

Titanium Grade 2

• Composition: Commercially pure titanium (99% Ti).
• Corrosion Resistance: Excellent resistance to a wide range of chemicals, including chlorides and seawater.
• Strength: Moderate strength, suitable for general-purpose applications.
• Applications: Marine, chemical, and medical industries.
• Advantages: Exceptional corrosion resistance, excellent weldability, and biocompatibility.

Titanium Grade 5 (Ti-6Al-4V)

• Composition: 90% Titanium, 6% Aluminum, 4% Vanadium.
• Corrosion Resistance: Excellent, with higher resistance to high-temperature oxidation compared to Grade 2.
• Strength: High tensile strength and fatigue resistance.
• Applications: Aerospace, military, chemical processing, and high-performance applications.
• Advantages: High strength-to-weight ratio, exceptional performance in high-stress environments, and high resistance to heat and corrosion.

Titanium Grade 7

• Composition: 90% Titanium, 6% Aluminum, 2% Palladium.
• Corrosion Resistance: Excellent resistance to acids and chlorides, with added resistance to oxidation.
• Strength: Similar to Grade 2 but enhanced with higher corrosion resistance.
• Applications: Chemical processing, especially in highly aggressive environments.
• Advantages: Improved corrosion resistance in acidic and oxidizing environments, weldability, and higher reliability in harsh conditions.

Carbon Steel

• Composition: Primarily iron with carbon content ranging from 0.02% to 2.1%.
• Corrosion Resistance: Poor; susceptible to rust and corrosion, especially in acidic or moist environments.
• Strength: Good tensile strength but lower than stainless steel and titanium alloys.
• Applications: General industrial applications, pipelines, and construction.
• Advantages: Cost-effective, high availability, and strength for less aggressive environments.

Stainless Steel

• Composition: Primarily iron with 10-20% chromium and other alloying elements such as nickel, molybdenum.
• Corrosion Resistance: Excellent, particularly against corrosion from most chemicals, oxidizing acids, and chlorides.
• Strength: High strength, better than carbon steel and comparable to titanium alloys.
• Applications: Chemical industries, food processing, marine, and medical applications.
• Advantages: Exceptional durability, good corrosion resistance, and strength, especially in non-extreme conditions.

Comparison Table:

Choosing the Right Flange Material:

When selecting the Class 300 Long Weld Neck Flange Raised Face, the choice of material largely depends on the operating conditions and the specific application:

Titanium Grades (2, 5, 7):

• Grade 2 is ideal for applications requiring superior corrosion resistance in environments like marine and chemical processing.
• Grade 5 is perfect for high-performance applications like aerospace and military, where high strength and lightweight properties are crucial.
• Grade 7 is best for chemical processing where enhanced corrosion resistance is needed, particularly in acidic environments.

Carbon Steel:

• Best suited for general industrial applications that do not involve extreme corrosive environments. Carbon steel is a cost-effective choice but has limited corrosion resistance compared to titanium or stainless steel.

Stainless Steel:

• Ideal for applications requiring both high strength and corrosion resistance in moderate environments. Stainless steel flanges are commonly used in food processing, pharmaceuticals, and other industries where hygiene and durability are important.

Class 300 Long Weld Neck Flange Dimensions:

Manufacturing Process:

Material Selection: The first step in manufacturing titanium flanges involves selecting high-quality titanium alloys, either Grade 2 or Grade 5, based on the application’s specific requirements. Grade 2 is chosen for its excellent corrosion resistance and weldability, while Grade 5 is selected for higher strength demands.

Forming and Machining: The titanium billets are heated to a high temperature and then formed into flange shapes using techniques like forging or casting. Once the shape is formed, the flange undergoes precision machining to achieve the correct dimensions, including the raised face and bolt holes.

Heat Treatment: Both Grade 2 and Grade 5 titanium alloys may undergo heat treatment processes to enhance their mechanical properties. For Grade 5, this typically involves a solution treatment followed by aging to increase strength.

Surface Finishing: The flange surfaces, especially the raised face, are polished to a smooth finish to improve the sealing surface when paired with gaskets. This step is critical to ensuring leak-tight performance and meeting the required surface finish standards.

Inspection and Testing: Each flange is subjected to rigorous quality control, including visual inspections, dimensional checks, and non-destructive testing such as ultrasonic or X-ray inspection to ensure there are no internal defects. Pressure testing may also be performed to verify the flange’s ability to withstand the specified pressure rating.