Guang Xi Baisheng Light Metal Material Co.Ltd
| Payment Terms | L/C, D/P, T/T |
| Supply Ability | 600mts per month |
| Delivery Time | 4-7 weeks |
| Packaging Details | wooden box |
| alloy | AA1235/8011 |
| surface | One side dull, one side bright |
| gauge | 0.01-0.05mm |
| packing | strong wooden suspended box |
| Application | for adhesive tape foil and describes the quality attributes of the master foil rolls. |
| Brand Name | GBS |
| Model Number | GBS-JDB |
| Certification | ISO |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
Heavy Gauge Aluminium Foil Mill Finish AA8011/AA3102
AA3003 container Foil , Thickness 0.03mm-0.13mm
Gauge 0.03-0.13mm Aluminium Foil For Pharmaceutical Packagin ,industry
AA1235 / AA8011 Heavy Duty Food Service Foil , Strong Aluminium Foil Bright Side
Product Specification
| Payment Terms | L/C, D/P, T/T | Supply Ability | 600mts per month |
| Delivery Time | 4-7 weeks | Packaging Details | wooden box |
| alloy | AA1235/8011 | surface | One side dull, one side bright |
| gauge | 0.01-0.05mm | packing | strong wooden suspended box |
| Application | for adhesive tape foil and describes the quality attributes of the master foil rolls. | Brand Name | GBS |
| Model Number | GBS-JDB | Certification | ISO |
| Place of Origin | CHINA | ||
| High Light | heavy duty aluminum foil ，commercial aluminum foil roll | ||
FOIL MASTER ROLLS FOR ADHESIVE TAPE FOIL
1. PURPOSE
To establish definitive quality standards on foil rolls, thereby minimizing claims attributable to any lack of understanding between supplier and customer.
2. OBJECTIVE
This specification covers 1235 or 8011 alloy foil master rolls for adhesive tape foil and describes the quality attributes of the master foil rolls.
3. PHYSICAL REQUIREMENTS
3.1 ALLOY AND TEMPER
Alloy and temper should correspond to Table 1.
Table 1
| Alloy | Temper |
| 1235,8011 | O |
3.2 MECHANICAL PROPERTIES
Mechanical properties should correspond to Table 2.
Table 2
| Alloy | Temper | Gauge,mm | Tensile Strength Mpa | Elongation,% |
| 8011 | O | 0.010-0.050 | ≥55 | ≥2.0 |
3.4 CHEMICAL COMPOSITION
The chemical composition should correspond to Table 4. ( Unit: % )
Table 4
| Alloy | Si | Fe | Cu | Mn | Mg | Zn | Ti | Remark | Others | Al | |
| Single | Total up | ||||||||||
| 1235 | 0.12～0.16 | 0.45～0.52 | 0.02 | 0.01 | 0.01 | 0.01 | 0.02 | Fe/Si=2.5～4 | 0.03 | ＞99.35 | |
| 8011 | 0.30~1.1 | 0.40~1.0 | 0.10 | 0.10 | 0.05 | 0.10 | 0.08 | 0.05 | 0.15 | Remainder | |
3.5 SURFACE CONDITION
3.5.1 The surface shall be cleaned and free from inclusions, scratches, wrinkles, cracks, overlapping or other internal defects.
3.5.2 Pin-holes
The pin-holes should correspond to Table 5.
Table 5
| Gauge mm | 0.0065 | 0.007 | 0.007～0.0075 | 0.009 | >0.009～0.011 | >0.011～0.015 | >0.015～0.020 | >0.020～0.050 |
| Pinholes/m2 | ≤1000 | ≤800 | ≤600 | ≤500 | ≤200 | ≤100 | ≤50 | ≤30 |
| Note: When the customer has special requirement, it has to be negotiated with supplier and demander. | ||||||||
3.5.3 Spices
The splices are as below Table 6.
Table 6
| Roll Diameter,mm | Splices |
| ≤400 | ≤1 |
| ＞400 | ≤2 |
a) All splices to be ultrasonic/tape.
b) It is allowed one splice per roll. (Max. once per 2000m)
c) Marked at the roll edge with a film, placed close to the splice.
3.5.4 Wettability
The wettability corresponds to A grade quality.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2015
Total Annual:
112000000-140000000
Employee Number:
370~420
Ecer Certification：
Active Member
Brief Introduction Guangxi bai Sheng light metal material ... Brief Introduction Guangxi bai Sheng light metal material ...
Get in touch with us
Leave a Message, we will call you back quickly!