Luoyang Zhongtai Industries CO.,LTD
| Packaging Details | Standard packing or according to customer's requirement |
| Condition | New |
| Warranty | 12 months |
| Rotating Speed | 200-1400r/min |
| Flow | 0.1-1.03m³/h |
| Port | Qingdao China |
| Classification | Ore Dressing Equipment |
| Pressure | 1.2MPa |
| Brand Name | ZTIC |
| Model Number | Ore Dressing Equipment |
| Certification | ISO\CE |
| Place of Origin | Henan China |
View Detail Information
Explore similar products
Low Failure Rate Sand Washing Equipment 20-180t/H 12 Months Warranty
Automated 1500mm Screw Bucket Wheel Sand Washer Machine Low Maintenance Rate
ISO 0.8-1.2rpm XS2600 Sand Washing Machine for mining Long Service Life
High Automation Reliability Ore Dressing Equipment Sand Washer Machine 200-300t
Product Specification
| Packaging Details | Standard packing or according to customer's requirement | Condition | New |
| Warranty | 12 months | Rotating Speed | 200-1400r/min |
| Flow | 0.1-1.03m³/h | Port | Qingdao China |
| Classification | Ore Dressing Equipment | Pressure | 1.2MPa |
| Brand Name | ZTIC | Model Number | Ore Dressing Equipment |
| Certification | ISO\CE | Place of Origin | Henan China |
Widely used Screw pump Membrane pump
Screw pump is an internally meshed positive displacement pump that primarily delivers liquids through the meshing of the screw and bushing, creating volume changes in the suction and discharge chambers. Its core working components consist of a bushing (stator) with a double-ended helical cavity and a single-ended helical screw (rotor) meshing with it within the stator cavity. When the input shaft, through a universal joint, drives the rotor to planetary rotation around the center of the stator, the stator-rotor pair continuously meshes to form a sealed chamber. These sealed chambers undergo uniform axial motion while maintaining a constant volume, transporting the conveying medium from the suction end through the stator-rotor pair to the discharge end. The medium drawn into the sealed chamber flows through the stator without being agitated or damaged.
Note: The screw pump stator is made of rubber. Dry pumping will burn it out and is not covered by the warranty.
Notes:
1.G indicates a cast iron housing, 40Cr intermediate and input shafts, a 40Cr rotor (hard chrome plated),
a nitrile rubber stator, and a packing seal.
2.GF indicates 304 stainless steel wetted parts, a nitrile rubber stator, and a mechanical seal.
Membrane pump is an industrial equipment used to transport corrosive, high viscosity or particle-containing special media. The main materials include aluminum alloy, stainless steel, cast iron, etc., suitable for high pressure corrosion resistance and strong corrosive conditions. This equipment adopts pneumatic, electric or hydraulic drive mode and is widely used in chemical, petroleum, pharmaceutical, food and electronic industries.
Product Parameters of Ore Dressing Equipment
Specifications of Single Screw Pump
| Model | Rotating Speed (r/min) | Flow (m³/h) | Pressure (MPa) | Motor (KW) | Inlet/Outlet Diameter mm | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)15-2 | 200-1400 | 0.1-1.03 | 1.2 | 0.55-2.2 | 32/25 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)30-1 | 200-1250 | 0.3-4.25 | 0.6 | 0.55-2.2 | 50/40 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)30-2 | 200-1250 | 0.3-5.35 | 1.2 | 0.55-5.5 | 50/40 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)35-1 | 200-1250 | 0.5-8.03 | 0.6 | 0.55-4 | 65/50 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)35-2 | 200-1250 | 0.68-8.03 | 1.2 | 1.1-7.5 | 65/50 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)40-1 | 200-760 | 1.38-9.1 | 0.6 | 1.5-4 | 80/65 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)40-2 | 200-760 | 1.38-9.1 | 1.2 | 3-11 | 80/65 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)50-1 | 100-650 | 0.54-15.63 | 0.6 | 3-7.5 | 100/80 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)50-2 | 100-650 | 0.54-15.63 | 1.2 | 3-15 | 100/80 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)60-1 | 100-630 | 0.42-22.6 | 0.6 | 2.2-11 | 125/100 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)60-2 | 100-630 | 0.42-22.6 | 1.2 | 4-18.5 | 125/100 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)70-1 | 80-560 | 1.1-28.4 | 0.6 | 3-11 | 125/100 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)70-2 | 80-560 | 1.1-28.4 | 1.2 | 5.5-22 | 125/100 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)85-1 | 60-370 | 1.06-35.2 | 0.6 | 5.5-15 | 150/125 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)85-2 | 60-370 | 5.5-35.2 | 1.2 | 11-30 | 150/125 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)105-1 | 29-290 | 1.3-62.5 | 0.6 | 5.5-30 | 200/200 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)105-2 | 29-290 | 1.3-62.5 | 1.2 | 11-55 | 200/200 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)135-1 | 80-260 | 29-115 | 0.6 | 15-45 | 200/200 | |||||||||||||||||||||||||||||||||||||||||||||
| G(F)135-2 | 80-260 | 29-115 | 1.2 | 30-75 | 200/200 | |||||||||||||||||||||||||||||||||||||||||||||
Specifications of Membrane Pump
| Model | Material | Inlet/Outlet Diameter | Capacity | Head | Particles Allowed | Pressure | ||||||||||||||||||||||||||||||||||||||||||||
| QBY-15 | Aluminium Alloy Stainless Steel | 1/2° | 13.2gpm(50lpm) | 70m | 1.6mm | ≤0.7Mpa | ||||||||||||||||||||||||||||||||||||||||||||
| 1/2° | 13.2gpm(50lpm) | 70m | 1.6mm | ≤0.7Mpa | ||||||||||||||||||||||||||||||||||||||||||||||
| QBY-20 | 3/4° | 13.2gpm(50lpm) | 70m | 2.5mm | ≤0.7Mpa | |||||||||||||||||||||||||||||||||||||||||||||
| 3/4° | 13.2gpm(50lpm) | 70m | 2.5mm | ≤0.7Mpa | ||||||||||||||||||||||||||||||||||||||||||||||
| QBY-25 | 1 | 40 gpm(150 lpm) | 70m | 4mm | ≤0.7Mpa | |||||||||||||||||||||||||||||||||||||||||||||
| 1 | 40 gpm(150 lpm) | 70m | 4mm | ≤0.7Mpa | ||||||||||||||||||||||||||||||||||||||||||||||
| QBY-40 | 3/2' | 90 gpm(340 lpm) | 70m | 5mm | ≤0.7Mpa | |||||||||||||||||||||||||||||||||||||||||||||
| 3/2° | 90 gpm(340 lpm) | 70m | 5mm | ≤0.7Mpa | ||||||||||||||||||||||||||||||||||||||||||||||
| QBY-50 | 2° | 150 gpm(570 lpm) | 70m | 6mm | ≤0.7Mpa | |||||||||||||||||||||||||||||||||||||||||||||
| 2° | 150 gpm(570 lpm) | 70m | 6mm | ≤0.7Mpa | ||||||||||||||||||||||||||||||||||||||||||||||
| QBY-80 | 3' | 265 gpm(1041 lpm) | 70m | 10mm | ≤0.7Mpa | |||||||||||||||||||||||||||||||||||||||||||||
| 3' | 265 gpm(1041 Ipm) | 70m | 10mm | ≤0.7Mpa | ||||||||||||||||||||||||||||||||||||||||||||||
| Applicable industries:acid and alkali liquid,cleanser,cosmetics,food,medicine,electronic,wastewater treatment et..(P materialis optional.) | ||||||||||||||||||||||||||||||||||||||||||||||||||
Product Display of Ore Dressing Equipment
Ore Dressing Equipment
Company Details
Business Type:
Manufacturer
Year Established:
1981
Total Annual:
80 million-100 million
Employee Number:
500~1000
Ecer Certification：
Verified Supplier
Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade. With a garden-like industrial park and modern st... Luoyang Zhongtai Industries Co., Ltd. The company was founded in 1981 and finished joint stock reform in 2005. There are eight subsidiaries and it's an independent legal entity with the qualifications of operating import & export trade. With a garden-like industrial park and modern st...
Get in touch with us
Leave a Message, we will call you back quickly!