IP65 LED Emergency Power Supply Panic Light Ballast Emergency Light Kit LED

Product Specification

IP65 LED Emergency Power Supply Panic Light Ballast Emergency Light Kit LED Emergency Driver for Highbay Light Panel Light Wallpack

Product description                                                                                                                            

The MF-188G-EM30A LED Emergency Driver is a high-performance IP65-rated solution supporting 100-277VAC input with 15W-3H/20W-2H/30W-1.5H emergency power options. Designed for constant current drivers, it features a 6000mAh LiFePO4 battery with comprehensive protection (over-charge/discharge/short-circuit) and operates in 0-60°C environments. The unit includes smart diagnostics with LED indicators for charging/fault status, remote control functionality, and automatic 180-day self-testing. Its waterproof design integrates test buttons and offers three-year warranty protection. Installation requires initial 24-hour charging and periodic 6-month maintenance charging for optimal performance.

High-Capacity Battery:
Features 6000mAh LiFePO4 battery with over-charge/discharge and short-circuit protection for reliable emergency power.
Wide Voltage Range:
Supports 100-277VAC input, adaptable to various power systems with 15W-3H/20W-2H/30W-1.5H output options.
Robust Protection:
IP65 waterproof rating and 0-60°C operating range ensure durability in diverse environments.
Smart Diagnostics:
LED indicators and remote control enable easy monitoring of charging, faults, and emergency status.
Auto Self-Test:
Performs automatic 180-day self-testing to verify system functionality, backed by a 3-year warranty.

descriptions:

self-detect
constant power emergency output
apply to constant current driver external lighting products
LiFePO4 using together
battery: over-charge/discharge protection and short circuit protection
working environment: temp.: 0 to 60°C
IP65 standard
not suitable for high risk lighting environment
Accessories: integrated waterproof button and indicator light, remote control
3years warranty

​

Input voltage	220-240Vac, 50/60Hz
Input current	0.003A Max. @230Vac
Charging power:	5.0W max.
Power factor	>0.5
Emergency output Voltage	DC100-260V,DC300V Max.
Emergency output Current:	58-150mA/ 75-200mA/115-300mA
Case temperature	to 60ºC Max.
IP Rating	IP 65
Warranty	3 Years
Battery Data	Li-ion 2.6Ah 7.4V
Discharging time&Power	5W 3H

​

​Wiring Diagram                                                                                                                                                 

​

​​Wiring Diagram                                                                                                                                      

Standardized Color-Coding System
Green/Yellow: Protective Earth (PE) connection
Blue: Neutral (AC N) input
Brown/Black: Live (AC L) input
Red/Black: Emergency output to LED array

Dual-Circuit Integration
Simultaneously connects to both main power (AC L/N) and emergency driver
Maintains separate pathways for normal and emergency operation

Driver Interface Connections
Dedicated terminals for LED driver input (Driver L/N)
Clearly marked emergency circuit outputs (Driver +/-)

Load Connection Points
Positive/Negative terminals for LED array (LED +/-)
Designed for direct connection to lighting fixtures

Safety-Compliant Layout
Proper separation of AC and DC circuits
Clear identification of all connection points per IEC standards

Physical Configuration
Integrated terminal block design
Strain relief provisions for wiring

Measure                                                                                                                                                

​Features                                                                                                                                                

LED indicator:
Green breathing pattern: charging mode
Green stable: battery fully charged
Red flashing: failure as below
Red flashing Once per second: Battery is not connected
Battery is defective
Red flashing four times a second: Load failure during emergency mode, open circuit/short circuit
Green flashing: Emergency status one per second


Remote control:
1: 0S < Key ON ≤1S, Enter a simulated state of emergency, the green indicator blinks once every second
2: 0S < Key OFF ≤1S, In simulated emergency situations, return to the normal charging state
3: 0S < Key OFF ≤1S, In the emergency state, the emergency state is turned off.


Self-test:
When emergency driver is on power, every 180 days ±1 day automatically enter the emergency state, emergency duration until the battery is discharged, then return to power-on status.

​Installation Instructions                                                                                                                         

1: If it is used for the first time or it does not enter the normal working state after being over-discharged, it is necessary to connect the main power to activate the emergency power supply and charge it for 24 hours. Please use the original emergency battery provided
2: When installing and using it, please keep it away from heat sources and only use it within a certain working temperature range.
3: Should be stored in a cool, dry environment.
4: After prolonged storage, recharge at least once every 6 months as needed.
5: Emergency driver testing must be longer than 1min, don't press the testing button frequently.

​Application                                                                                                                                              

Application:
school,hospital,subway,train station,shoppingmall,supermarket,airport,office, factory,hotel,basement,parking lot,public place

​Packaging & Shipping                                                                                                                           

Product Line                                                                                                                                          

FAQ:
Q1: Are you a manufacturer?
MF: Yes, we are a manufacturer with our own factory. We have over 14 years of experience in research and development, as well as manufacturing, and we operate based on ISO quality management since 2009.

Q2: Can I order a sample of the LED Light?
MF: Yes, we welcome sample orders to test and check the quality of our products. Mixed samples are also acceptable.

Q3: What is the lead time for the LED Light?
MF: For sample orders, the lead time is 3-7 days, and for mass production orders, it is 15-25 days. The exact lead time depends on the order quantities.

Q4: How do you ship the finished products?
MF: We offer optional shipping methods such as by SEA, AIR, or Express (DHL, UPS, FedEx, TNT, etc.).

Q5: Can I print my logo on the LED Light?
MF: Yes, we provide OEM service to our customers. We can help to make the label and color box according to your requirements.

Q6: How do I proceed with an order for the LED Light?
MF: Firstly, please let us know your detailed requirements and application environment. Secondly, we will recommend some suitable products and solutions to you based on your request. Thirdly, after confirming all the details, customers will issue a purchase order and make the payment to confirm, and then we will start production and arrange shipment.

Q7: How do you handle defective products?
MF: All of our products are produced in strict quality control systems, and the defective rate is less than 0.2% according to our shipment records. We offer a 5-year warranty for this product. If there is any defect during the warranty period, please provide pictures or videos of the defective lights in working situations, and we will ship new lights to you within a few days or together with your next order.