IP20 Panic Light Ballast Emergency Ballast Interter Emergency Light Kit LED

Product Specification

IP20 Panic Light Ballast Emergency Ballast Interter Emergency Light Kit LED Emergency Driver for Triproof Light Down Light Ceiling Light

Product description                                                                                                                            

The MF-188X LED Emergency Driver is a compact (115×85×28mm) Li-FePO4-compatible solution delivering 3W/3H emergency power with zero standby current. Featuring multi-protection (overcharge/discharge/short-circuit), it offers visual diagnostics via LED indicators and supports manual testing plus automatic 180-day self-test cycles. The IP20-rated unit operates up to 75ºC, meets IEC/EN standards, and requires 24-hour initial charging with 6-month maintenance recharges. Backed by a 3-year warranty, this energy-efficient driver (<5W input) ensures reliable emergency lighting with its 4000mAh battery capacity and robust 3000V electric strength protection.

Smart Protection:
Overcharge/discharge, overload, and short-circuit safeguards
Zero Standby Drain:
0μA static current when powered off
Advanced Diagnostics:
LED indicators for charging (green), faults (red flashing), and emergency status
Flexible Testing:
Manual emergency simulation (10s), auto semi-annual self-test (180-day cycle)
Robust Design:
IP20 rated, 75ºC tolerance, compliant with IEC/EN standards
Usage:
Requires 24h initial charge, 6-month storage recharge, and >1min test duration. 3-year warranty.

Features                                                                                                                                                   

self-detect
constant power emergency output
Suits for LED fitting with external LED driver
External battery, Li-ion/Li-FePO4/Ni-CD
With multi-protection function;
battery overcharge protection;
battery over-discharge protection;
output overload protection;
short-circuit protection.
Accessary test switch and LED indicator
In the state of the power off, to connect with the battery, static current at the battery terminal is 0uA

Specifications:                                                                                                                                       

​

Input voltage	220-240Vac, 50/60Hz
Input current	0.003A Max. @230Vac
Input wattage	<5.0W
Power factor	≥0.5 @230 Vac
Battery charging	350mA Max.
Battery charging time	≤24Max
Emergency output Voltage	DC25-185VMax.200VDC
Emergency power	3W
Emergency time	3H
Battery	Li-FePO4/26650/4000mAh-3.2V
Storage Temperature	-20-40ºC
Electric Strength	3000Vac, 5mA (input to output)
IP Rating	IP 20
Maximum shell temperature	75ºC
Warranty	3 Years
Relevant standard	IEC 61347-2-7 / IEC 61347-1 / EN55015

​

Wiring Diagram                                                                                                                                      

• AC Input: Brown (Line) and Blue (Neutral) wires for 220-240V power supply

• LED Connection: Red (positive) and Black (negative) terminals for LED output

• Battery: Dedicated charging wires (color not specified) for Li-FePO4 battery connection

• Switch Control: Includes wall switch integration

• Wire Specs: Uses 0.5-1.5mm² cables with 7-8mm stripping length

Measure                                                                                                                                                

​LED and test button status                                                                                                                  

LED INDICATOR
Green breathing pattern: charging mode
Green stable: battery fully charged
Red flashing: failure as below
Red flashing Once per second: Battery is not connected
Battery is defective
Red flashing four times a second: Load failure during emergency mode, open circuit/short circuit
TEST BUTTON
1: 0S<Key≤2S, Enter a simulated state of emergency, the green indicator blinks once every second, keep emergency status for 10±1 seconds and back to normal status
2: In simulated emergency situations, Short press once to exit and return to the normal charging state
3: 0S<Key≤1S. In the emergency state, the emergency state is turned off.
QUARTERLY SELF-TEST
when emergency driver is on power, every 180 days±1 day automatically enter the emergency state, emergency duration until the battery is discharged, then return to power-on status.

​Installation Instructions                                                                                                                         

1: If it is used for the first time or it does not enter the normal working state after being over-discharged, it is necessary to connect the main power
to activate the emergency power supply and charge it for 24 hours. Please use the original emergency battery provided
2: When installing and using it, please keep it away from heat sources and only use
it within a certain working temperature range.
3: Should be stored in a cool, dry environment.
4: After prolonged storage, recharge at least once every 6 months as needed.
5: Emergency driver testing must be longer than 1min, don't press the testing button frequently.

​Application                                                                                                                                              

Application:
school,hospital,subway,train station,shoppingmall,supermarket,airport,office, factory,hotel,basement,parking lot,public place

​Packaging & Shipping                                                                                                                           

Product Line