| Applicable viscosity | 1~500,000cps |
| Dimensions(W*D*H) | 125.5*75*20mm(with fluid-box) |
| Operating temperature range | 10-50℃ |
| Weight | 440g(With fluid-box) |
| Payment Terms | L/C,D/P,T/T,Western Union,D/A |
| Supply Ability | 200sets per month |
| Delivery Time | 7-60days |
| Packaging Details | Carton/Wooden box |
| Frequency | 1200HZ |
| Input air-pressure | 0.1-8Bar |
| Product | KPS200-U dispenser jet valve |
| Brand Name | Mingseal |
| Model Number | KPS2000-U |
| Certification | ISO, ROHS |
| Place of Origin | China |
View Detail Information
Explore similar products
Non Contact Dual Piezo Jetting Valve for Precision Dispensing in Electronics
High Viscosity Piezo Jet Valve for Precision Dispensing with Integrated
Precision Electronics Jetting Valve — Piezo Jet Valve Jetting System up to 1200
High Viscosity 1~500,000 cps Piezo Jetting Valve with 0.5nl Minimum Glue
Product Specification
| Applicable viscosity | 1~500,000cps | Dimensions(W*D*H) | 125.5*75*20mm(with fluid-box) |
| Operating temperature range | 10-50℃ | Weight | 440g(With fluid-box) |
| Payment Terms | L/C,D/P,T/T,Western Union,D/A | Supply Ability | 200sets per month |
| Delivery Time | 7-60days | Packaging Details | Carton/Wooden box |
| Frequency | 1200HZ | Input air-pressure | 0.1-8Bar |
| Product | KPS200-U dispenser jet valve | Brand Name | Mingseal |
| Model Number | KPS2000-U | Certification | ISO, ROHS |
| Place of Origin | China | ||
| High Light | voice coil motor adhesive dispensing valves ,adhesive jetting valve ,vcm jetting valve | ||
This VCM jet valve is designed to place small adhesive dots and short lines for voice coil motor assembly and similar small electro-mechanical parts. It provides repeatable drop volume and clean placement inside tight housings. Use this valve when you need accurate adhesive dosing with minimal rework and reliable line performance.
In VCM assembly, misplaced or excess adhesive causes motor imbalance, reduced sound quality, or assembly rejects.
Typical problems come from poor control of drop size, nozzle contact, or slow recovery after each shot. Valves that touch parts or cannot keep droplet volume steady lead to overflow, bridging, or inconsistent bonds.
This valve delivers non-contact micro-drops with a controlled pulse so adhesive lands exactly where needed without touching the part. It supports stable operation across shifts and reduces cleaning stops. Main benefits:
| Input air pressure | 0.1-8 bar |
| Material viscosity |
Suitable for middle and high viscosity. Maxium: 500000mPa·s |
| Min.dispensing amount | 0.5nl (CPK>1.33) |
| Continuous jetting frequency | 1200Hz |
| Dimensions (W×D×H) | 125.5*40*20mm (without fluid-box) |
| 125.5*75*20mm (with fluid-box) | |
| Weight | 440g (with fluid-box) |
Conclusion: micro-drops are formed by a short actuator pulse and steady fluid feed. A controlled pulse creates a pressure wave in the valve chamber that pushes a defined amount of adhesive through the nozzle. Pulse timing and amplitude set drop size while steady inlet pressure keeps the meniscus stable for repeatable shots. Non-contact ejection avoids smearing and reduces tool collisions.
Conclusion: choose based on your target drop size, fluid viscosity, and mounting limits.
Steps:
Q1: Can this valve place adhesive inside tight motor housings without touching parts?
A1: Yes. The non-contact design and slim nozzle options reduce collision risk; proper mounting offset is required.
Q2: What viscosities can it handle?
A2: It works with many adhesives up to about 200,000 cps when nozzle, pressure, and temperature are set appropriately. Send fluid specs for confirmation.
Q3: How small a drop can it reliably make?
A3: Typical minimum stable drops are about 1 nL, but production tuning is needed to keep drops stable over long runs.
Q4: Do you offer sample testing with our adhesive and motor part?
A4: Yes. Send your adhesive data sheet and a short description or photo of the part. We can run a trial and share results.
Founded in 2008, Changzhou Mingseal Robot Technology Co., Ltd. is a technology-driven manufacturer of high-end equipment, specializing in connection, assembly, inspection systems, and key components for advanced semiconductor packaging and precision electronics. Our solutions are widely adopted by leading customers in sectors such as semiconductor packaging, consumer electronics, and automotive electronics. With a strong presence across Asia and the Americas, we deliver reliable support and innovation globally.
Partner with Mingseal to power the future of automatic manufacturing!
Company Details
Business Type:
Manufacturer
Year Established:
2008
Total Annual:
10000000-50000000
Employee Number:
500~600
Ecer Certification:
Verified Supplier
Established in 2008, Changzhou Mingseal Robot Technology Co., Ltd. (hereinafter referred to as “Mingseal Technology”) is a technology-driven high-end equipment manufacturing enterprise committed to providing connection and assembly equipment, key core components, and customized technolog... Established in 2008, Changzhou Mingseal Robot Technology Co., Ltd. (hereinafter referred to as “Mingseal Technology”) is a technology-driven high-end equipment manufacturing enterprise committed to providing connection and assembly equipment, key core components, and customized technolog...
Get in touch with us
Leave a Message, we will call you back quickly!