Guangdong MKS Hydraulic Co., Ltd.
| Payment Terms | D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 50 pcs / month |
| Delivery Time | 5-8 work days |
| Packaging Details | wooden carton |
| series | 31 |
| Size | 18 to 140 |
| Nominal pressure | 280 bar |
| Maximum pressure | 350 bar |
| Operating mode | Opened circuits |
| Warranty | One year |
| Brand Name | Bosch Rexroth |
| Model Number | A10VSO |
| Certification | GS, RoHS, CE, ISO9001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Cast Iron Hydraulic Axial Piston Variable Pumps Rexroth Parker Denison Eaton
Straight Shaft Swashplate Piston Type A10vo71 Hydraulic Open Circuit Pump
Straight Shaft Swashplate Piston Type Pressureoil Rexroth Variable High Pressure
Electric Axial Plunger Pump Hydraulic Open Circuit Pump Rexroth A10vso140
Product Specification
| Payment Terms | D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 50 pcs / month |
| Delivery Time | 5-8 work days | Packaging Details | wooden carton |
| series | 31 | Size | 18 to 140 |
| Nominal pressure | 280 bar | Maximum pressure | 350 bar |
| Operating mode | Opened circuits | Warranty | One year |
| Brand Name | Bosch Rexroth | Model Number | A10VSO |
| Certification | GS, RoHS, CE, ISO9001 | Place of Origin | China |
| High Light | Construction machinery Axial piston variable pump ，A10VSO Axial piston variable pump ，A10VSO Sreies31 Axial piston variable pump | ||
Features
– Axial piston variable displacement pump with swash plate design for hydrostatic drives in open circuits
– Flow proportional to drive speed and displacement
– Flow can be varied infinitely by adjusting the swash plate angle.
– 2 case drain ports
– Excellent suction characteristics
– Low noise level
– Long service life
– Axial and radial load capacity on the drive shaft
– Optimal power-to-weight ratio
– Wide range of control ranges
– Short control times
– The pump is available with through-drive and can accommodate gear pumps or axial piston pumps of equal or smaller size, i.e. 100% through-drive.
Safety instructions
- The A10VSO pumps are designed for use in open circuits.
- Project planning, assembly and commissioning of the axial piston units must be carried out by qualified personnel.
- Before using the axial piston units, please read the corresponding instruction manuals in full.
- If necessary, request these manuals from Bosch Rexroth.
- During and shortly after operation, there is a risk of burns from the axial piston units (especially the solenoids). Take appropriate safety measures (e.g. wear protective clothing).
- Depending on the operating conditions of the axial piston unit (operating pressure, oil temperature), the characteristics may change.
- Working line ports:
· The ports and fixing threads are designed for the maximum specified pressure. The machine or system manufacturer must ensure that the safety factors of the connecting elements and lines meet the specified operating conditions (pressure, flow, hydraulic oil, temperature).
· The working line ports and function ports are designed only for hydraulic lines.
- Pressure cut-off and pressure control do not provide overpressure protection. A separate pressure relief valve is provided in the hydraulic system.
- The data and instructions contained here must be observed.
- The product is not certified as a component for the general machine safety concept requirements in accordance with DIN EN ISO 13849.
- The following tightening torques apply:
· Connectors:
For the tightening torques for the connectors used, refer to the manufacturer's instructions.
· Mounting screws: For mounting screws with ISO metric threads in accordance with DIN 13 and threads in accordance with ASME B1.1, we recommend checking the tightening torques separately in accordance with VDI 2230.
· Threaded holes for axial piston units:
The maximum permissible tightening torque MG max for threaded holes is a maximum value that must not be exceeded.
· Locking screws:
For the metal locking screws supplied with the axial piston unit, a tightening torque MV is required.
Control mode
DG - two-point direct-acting control
DR - pressure control
DRG - remote pressure control
DFR, DFR1 - pressure and flow control
DFLR - pressure, flow and power control
ED - electro-hydraulic control
Product photos
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2014
Total Annual:
10000000-12000000
Employee Number:
80~100
Ecer Certification：
Active Member
MKS hydraulic specializes in producing, sales and maintenance of hydraulic pumps and motors. The company has been working in hydraulic field since 1995 and wealth professional knowledge and field experience. We have developed and produced A4VSO, A4FO, A4FM, A10VSO, Parker PV varies hydraulic ... MKS hydraulic specializes in producing, sales and maintenance of hydraulic pumps and motors. The company has been working in hydraulic field since 1995 and wealth professional knowledge and field experience. We have developed and produced A4VSO, A4FO, A4FM, A10VSO, Parker PV varies hydraulic ...
Get in touch with us
Leave a Message, we will call you back quickly!