Payment Terms | L/C, T/T |
Delivery Time | 3-7work days |
Packaging Details | Fine packing with oiled paper/as required |
Standard | AISI, ASTM, GB, JIS, DIN |
Type | Coil/sheet/plate |
Grade | DC54D+Z |
Surface Treatment | Galvanized/Coated |
Width | Customers' Requirement |
Length | Customers' Requirement |
Tolerance | Min width tolerance ±0.05 |
Processing Service | Decoiling, cutting |
Shipment Port | Shanghai Port , China |
Delivery Terms | FOB/CIF/CFR/DDA |
Brand Name | Baosteel |
Model Number | DC54D+Z |
Place of Origin | China |
View Detail Information
Explore similar products
24 Gauge Pre Galvanized Steel Plate Metal DC56D+Z
8x4 Hot Dip Galvanized Steel Sheet HC340/590DPD+Z For Building
Cold Electric 1mm Gi Sheet Dipped Galvanized Steel Steel Coil DC01E+Z
11 Gauge Cold Rolled Hot Dip Galvanized Steel Panel HC340LAD+Z
Product Specification
Payment Terms | L/C, T/T | Delivery Time | 3-7work days |
Packaging Details | Fine packing with oiled paper/as required | Standard | AISI, ASTM, GB, JIS, DIN |
Type | Coil/sheet/plate | Grade | DC54D+Z |
Surface Treatment | Galvanized/Coated | Width | Customers' Requirement |
Length | Customers' Requirement | Tolerance | Min width tolerance ±0.05 |
Processing Service | Decoiling, cutting | Shipment Port | Shanghai Port , China |
Delivery Terms | FOB/CIF/CFR/DDA | Brand Name | Baosteel |
Model Number | DC54D+Z | Place of Origin | China |
High Light | 3mm galvanised sheet Coil ,3mm galvanised sheet Steel ,Galvanised DC54D+Z |
DC54D+Z (St06Z) hot-dip galvanized sheet (coil) has the characteristics of strong coating adhesion, strong erosion resistance, accurate control of the thickness of the galvanized layer, high dimensional accuracy, flat profile, good mechanical, processing, and welding performance. They can be used to manufacture automotive interior and exterior panels, structural parts and reinforcements.
DC54D+Z(St06Z) hot dip galvanized automotive steel size:
Nominal thickness: 0.30mm~3.0mm, nominal width: 800mm~1830mm
Note: nominal thickness of a plate/strip is sum of base plate thickness and coating thickness.
Grade | Q/BQB 420-2014 | EN10346:2009 | JISG3302:2012 | ASTM A653M-13 | FIAT | MS | GMW |
DC54D+Z,DC54D+ZF | DX54D | SGCD3 | DDS Type C | FEP05 | CR05 | CR4 |
DC54D+Z(St06Z) hot dip galvanized automotive steel mechanical performances and coating adhesiveness:
Steel grade | Mechanical performances | Coating adhesiveness | |||||||
Yield strength MPa | Tensile strength MPa | n90 | r=90 | After breakage percent elongation % ≥ | Bending center diameter in following coating weight(g/m²)c (a=plate thickness) | ||||
≥ | ≥ | L0=80mm, b=20mm | ≤140/140 | >140/140~175/175 | >175/175 | ||||
Under following nominal thickness mm | |||||||||
≤0.7 | >0.7 | ||||||||
DC54D+Z(St06Z) | 140~220 | 270~350 | 0.18 | 1.6 | 34 | 36 | 0a | 1a | 2a |
If the product thickness is >1.5mm, the min.r90 specified is allowed to be reduced by 0.2. In the case of product thickness <0.7mm, the specified allowable reductions for min.r90 and n90 are 0.2 and 0.01 respectively. For differential coating products, use a thicker coating as the outer surface in the bending test. |
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller,Other
Year Established:
2018
Total Annual:
10000-500000
Employee Number:
10~50
Ecer Certification:
Active Member
Our Company Established in 2018, MOOPEC is now a professionally company in providing test mold materials for automotive stamping mold factories, mainly for manufacturing steel and aluminum materials for body-in-white, including two series of deep drawing and high strength. The former co... Our Company Established in 2018, MOOPEC is now a professionally company in providing test mold materials for automotive stamping mold factories, mainly for manufacturing steel and aluminum materials for body-in-white, including two series of deep drawing and high strength. The former co...
Get in touch with us
Leave a Message, we will call you back quickly!