Hefei Chitherm Equipment Co., Ltd
| Payment Terms | Customized |
| Supply Ability | 50 Sets/Year |
| Delivery Time | Customized |
| Packaging Details | Customized |
| Range of Applications | Industrial |
| Type | Electric Holding Furnace |
| Usage | Ceramic Drying |
| Fuel | Electric |
| Atmosphere | Nitrogen |
| Effective Chamber Dimensions | 800*800*800mm(W*H*D) |
| Thermocouple Type | K Type |
| Transport Package | Wooden Packaging |
| Specification | 1500*1930*2000mm(W*H*D) |
| Trademark | Chitherm |
| Origin | China |
| HS Code | 8514101000 |
| Customization | Available |
| Place Style | Vertical |
| Brand Name | Chitherm |
| Model Number | Hrf512-07n |
| Place of Origin | China |
| Certification | ISO |
View Detail Information
Explore similar products
Industrial Hot Air Drying Oven with 800*800*800mm Chamber and 650°C Rated
HRF512-07N Model Muffle Furnace with 800*800*800mm Chamber and 650°C Rated
HRF512-07N Nitrogen Hot Air Debinding Furnace with 800*800*800mm Chamber K Type
Muffle Furnace Hot Air Drying Oven with 800*800*800mm Chamber for Uniform and
Product Specification
| Payment Terms | Customized | Supply Ability | 50 Sets/Year |
| Delivery Time | Customized | Packaging Details | Customized |
| Range of Applications | Industrial | Type | Electric Holding Furnace |
| Usage | Ceramic Drying | Fuel | Electric |
| Atmosphere | Nitrogen | Effective Chamber Dimensions | 800*800*800mm(W*H*D) |
| Thermocouple Type | K Type | Transport Package | Wooden Packaging |
| Specification | 1500*1930*2000mm(W*H*D) | Trademark | Chitherm |
| Origin | China | HS Code | 8514101000 |
| Customization | Available | Place Style | Vertical |
| Brand Name | Chitherm | Model Number | Hrf512-07n |
| Place of Origin | China | Certification | ISO |
| High Light | 800*800*800mm Chamber Muffle Furnace ，650°C Rated Temperature Muffle Furnace ，±1℃ Temperature Control Muffle Furnace | ||
•Model: HRF512-07N
•Application: Suitable for heat treatment processes such as drying, curing, and degreasing of semiconductors, electronic components, and materials.
•Operating Temperature Range: Room temperature (RT) to 650°C (for regular use).
•Maximum Test Temperature: 700°C (the equipment's limit, but routine processes are recommended not to exceed 650°C).
| Delivery List | |||
| Item | Note | QTY | |
| Basic Compositions | Dryer | 1 PC | |
| Certificates of Inspection | Dryer and major purchased components | 1 Set | |
| Electric purification furnace | For exhaust gas treatment | ||
| Technical Documents | Manual instructions, technical documents of major purchased components, etc | 1 Set | |
| Key Parts | Stainless Steel Heater | 1 Set | |
| Temperature Controller | 2 Set | ||
| Touch Screen | 1 Set | ||
| circulating fan | 1 Set | ||
| Spares | SSR | 1 PC | |
| Stainless Steel Heater | 1 Set | ||
| Seal gasket | 2 Set | ||
II. Furnace Structure and Heating System
• Furnace dimensions (internal): 800 × 800 × 800 mm (W × H × D)
• Number of temperature zones: 1 zone
• Temperature control points: 1 point
• Heating method: Stainless steel heating tubes
• Heating power:
Maximum heating power ≤ 36 kW
• Furnace temperature uniformity: ±5°C (measured under no-load conditions after stabilizing at 650°C for 1 hour)
• Insulation material: Full fiber material (excellent thermal insulation and high-temperature resistance)
• Air supply system: 1 centrifugal fan wheel for hot air circulation to ensure uniform furnace temperature
III. Control System
• Upper computer: MCGS touchscreen (user-friendly HMI interface)
• Lower computer:
Yamatake (Japan) C1A/C1M temperature controller
Siemens PLC
• System features:
Composed of MCGS touchscreen + Siemens PLC + Yamatake temperature controller, stable structure with strong expandability
Stable and reliable performance, suitable for long-term continuous operation
Fast and precise real-time data acquisition and control response
The upper computer collects temperature data in real time, enabling parameter setting and feedback to ensure control accuracy and system stability
IV. Gas and Cooling System
Gas (nitrogen) requirements:
Gas type: High-purity nitrogen
Purity requirement: ≥ 99.999%
Inlet pressure: 0.2 ~ 0.4 MPa
Nitrogen consumption: ~10 m³/h
Cooling method:
Natural furnace cooling (no forced water or air cooling system; optional based on process needs)
Water inlet (if water cooling system is selected, the following conditions must be met):
Water quality: Clean and non-corrosive
Water temperature: ≤ 23°C
Water pressure: 0.2 ~ 0.4 MPa
Water flow rate: ~2 ~ 6 L/min (circulation volume)
Note: If the water cooling system is not standard, water inlet conditions may not apply. If water cooling modules are included, provide cooling water according to actual configuration requirements.
V. Environmental and Installation Requirements
Environmental conditions:
Ambient temperature: 0 ~ 40°C
Relative humidity: < 80% RH
No corrosive gases
No strong airflow disturbances
Ventilation requirements:
Non-contact connection to customer-provided exhaust system
Exhaust capacity requirement: > 15 m³/h (for discharging furnace exhaust or volatiles)
Floor requirements:
Level and free of significant vibrations
Load-bearing requirement: > 300 kg/m²
Power supply requirements:
Power type: 220/380V, 3-phase 5-wire, 50 Hz
Power capacity: > 50 kVA
Wiring color standards:
Live wires (L1/L2/L3): Yellow, green, red
Neutral wire (N): Blue
Ground wire (PE): Yellow-green
Installation space requirements:
Recommended installation space: 2000 × 3000 × 3000 mm (W × D × H)
Minimum installation area: > 6 m²
Hefei Chitherm Equipment Co., Ltd. is an advanced equipment supplier specializing in the research and development, design, manufacturing, sales, maintenance, and service of high-, medium-, and low-temperature industrial furnaces and laboratory furnaces. Its product range encompasses bell furnaces, box furnaces, hot air furnaces, vacuum furnaces, tube furnaces, mesh belt furnaces, bogie hearth furnaces, rotary furnaces, roller hearth furnaces, and pusher furnaces, which are extensively applied in fields such as advanced ceramics, electronic components, thick-film circuits, additive manufacturing, powder metallurgy, new energy, and photovoltaics. These furnaces are suitable for thermal treatment processes of materials including ITO targets, MLCC/HTCC/LTCC, ceramic filters, magnetic materials, CIM/MIM, and lithium battery cathodes and anodes, as well as various other new material processes such as pre-sintering, dewaxing, degreasing, sintering, drying, heat treatment, curing, and ceramization.
1.What products does Chitherm offer?
We provide customers with high-quality bell furnaces, hot air furnaces, box furnaces, tube furnaces, vacuum furnaces, car bottom furnaces, rotary kilns, mesh belt furnaces, and pusher furnaces.
2.What pre-sales services does Chitherm provide?
We offer timely consultation services to help customers select the most suitable products, along with highly customizable solutions to meet your specific requirements.
3.What are Chitherm's core strengths?
As a high-tech enterprise integrating R&D, manufacturing, and sales, Chitherm possesses patented technologies and core resources to deliver superior solutions.
Company Details
Business Type:
Manufacturer
Year Established:
2020-6-1
Total Annual:
2480238-2756380
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Hefei Chitherm Equipment Co., Ltd. is a professional enterprise engaged in the research and development, design, manufacturing, sales, maintenance and service of high, medium and low temperature industrial furnaces and experimental furnaces.Our products include Bell Furnaces, Box Furnaces, Hot Air D... Hefei Chitherm Equipment Co., Ltd. is a professional enterprise engaged in the research and development, design, manufacturing, sales, maintenance and service of high, medium and low temperature industrial furnaces and experimental furnaces.Our products include Bell Furnaces, Box Furnaces, Hot Air D...
Get in touch with us
Leave a Message, we will call you back quickly!