MiniMeta Portable Single Gas Detector for SO2 with IP68 Protection 2-Year

A compact, IECEX/ATEX/EMC certified single-gas detector with IP68 water/dust resistance and 2-year standby time (no charging, no calibration needed during standby). Detects sulfur dioxide (SO2) from 0–100ppm with 0.01ppm resolution. Features 95dB alarm, dual red LEDs, vibration alarm, and replaceable battery & sensor. Optional DKM / DKS docking stations for automated bump testing, calibration, and data management. Ideal for industrial hygiene, environmental monitoring, and flue gas detection.

The MiniMeta is an IECEX/ATEX/EMC certified portable single-gas detector designed for long-term, low-cost ownership. It operates on a 3.6V dry battery (non-rechargeable, replaceable) with an extraordinary 2-year standby time – no charging and no calibration required during this period. The battery and sensor are both replaceable, extending the device's service life.

Taking sulfur dioxide (SO2) as an example, the MiniMeta uses an electrochemical sensor to measure concentrations from 0–100ppm with a fine resolution of 0.01ppm. Accuracy is ≤ ±2–5% FS, with a response time (T90) of 15–30 seconds.

The detector features three simultaneous alarm modes: 95dB buzzer (@30cm) , 2 high-brightness red LEDs, and vibration alarm. Users can set low/high alarm thresholds, STEL, TWA, and receive low battery, calibration due, and bump test due alerts. The LCD display shows gas name, concentration, unit, and battery power, along with real-time value, TWA, STEL, MAX, and MIN.

For fleet management, the MiniMeta supports optional single or multi-unit docking stations (DKM / DKS) for automated bump testing, calibration, parameter configuration, and data export.

Sulfur dioxide is a colorless, pungent gas produced by burning fossil fuels containing sulfur and by industrial processes. It is a major air pollutant and poses serious health risks.

• Flue gas monitoring – Power plants, incinerators, industrial boilers
• Petroleum refining – Catalytic crackers, sulfur recovery units, flare stacks
• Metal smelting – Copper, lead, zinc, and nickel smelters
• Pulp & paper mills – Kraft pulping process, recovery boilers
• Food processing – Sulfur fumigation for dried fruits, wine making (preservative)
• Environmental monitoring – Urban air quality, volcanic activity, fumaroles
• Chemical plants – Sulfuric acid and fertilizer production
• Maritime shipping – Engine room emissions using high-sulfur fuel
• Mining – Ore roasting and smelting operations
• Laboratories – Fume hoods and chemical storage areas

• Certified safety – IECEX/ATEX/EMC certified, Ex ia IIC T4 Ga for hazardous areas (Zone 0, 1, 2).
• IP68 protection – Fully waterproof and dustproof, submersible and washable.
• 2-year standby time – Powered by replaceable 3.6V dry battery; no charging needed for two years.
• Replaceable battery and sensor – Extends device lifetime and reduces long-term ownership cost.
• Triple alarm system – 95dB buzzer + dual high-bright red LEDs + vibration alarm.
• Multiple alarm types – Low alarm, high alarm, STEL, TWA, low battery, calibration due, bump test due – all user adjustable.
• Comprehensive display – Shows gas name, concentration, unit, battery level, real-time value, TWA, STEL, MAX, MIN.
• Automatic self-test – Improves safety by verifying sensor and circuit integrity on power-up.
• Optional docking station support – For automated bump tests, calibration, parameter configuration, and data export.
• pact and wearable – Small size (90×60×33mm), lightweight (125g), with back clip for easy attachment.

The MiniMeta can be used with two types of docking stations to simplify fleet management, automate calibration, and maintain compliance records. Both support bump testing, calibration, parameter configuration, and data export, but they serve different purposes.

The DKM is a physical docking station where you insert the MiniMeta detector. It connects to calibration gas and automates the bump test/calibration process.

Key functions:

• One-key bump test – Press BUMP button; LED indicates pass/fail.
• One-key calibration – Press CAL button (only if bump test fails).
• One-key parameter configuration – Press and hold BUMP for 3 seconds to upload low/high alarm values to the detector.
• Auto bump/calibration mode – When enabled via PC software and used with a DFR (demand flow regulator), the docking station automatically performs bump tests and calibration upon detector insertion.
• USB data export – Insert a USB drive; press and hold CAL for 3 seconds to export bump test, calibration, and configuration records.
• Cloud upload (optional) – Uploads data to Safegas cloud via Wi-Fi for remote fleet management.
• Pump block protection – Automatically shuts off pump if blockage is detected.

LED indicators:

• STATUS: Connection status and test result
• POWER: Power and data export status
• PUMP: Pump operation status
• NET/TCP: Network and cloud connection status

1. Power Plants & Industrial Boilers
   1. Monitor SO₂ emissions from coal, oil, or biomass combustion
   2. Check flue gas desulfurization (FGD) system efficiency
   3. Ensure compliance with emission limits (e.g., EPA, EU Industrial Emissions Directive)
2. Petroleum Refineries
   1. Catalytic crackers, sulfur recovery units (Claus process), flare stacks
   2. Detect SO₂ leaks in amine treatment areas
   3. Worker personal protection during turnaround maintenance
3. Metal Smelting & Refining
   1. Copper, zinc, lead, nickel, and aluminum smelters
   2. Ore roasting, sintering plants, and converter areas
   3. High-concentration SO₂ exposure risk – critical for worker safety
4. Pulp & Paper Mills
   1. Kraft pulping process, recovery boilers, bleach plants
   2. SO₂ used in chlorine dioxide generation or as a reducing agent
   3. Monitor worker exposure in enclosed areas
5. Food Processing
   1. Dried fruit (apricots, raisins) sulfur fumigation
   2. Wine making (SO₂ as preservative and antioxidant)
   3. Worker safety in fumigation chambers and storage areas

• Portable gas detector 1 piece
• Calibration cap 1 piece
• User manual 1 piece
• Certificate of conformity/ Warranty card 1 piece