HUATEC GROUP CORPORATION
| Payment Terms | L/C, T/T, Western Union,Paypal |
| Supply Ability | 100 sets per month |
| Delivery Time | 3-7 days |
| Packaging Details | in High quality carton |
| Product name | Penetrate testing test specimen |
| Model | YM-B3 |
| Testing standard | JB/T6064-2006、NB/T47013.5-2015 |
| Flaw width target value | 0.5µm |
| Brand Name | HUATEC |
| Model Number | YM-B3 |
| Certification | ISO，CE，Gost |
| Place of Origin | China |
View Detail Information
Explore similar products
HUATEC IIW V1 Ultrasonic Calibration Blocks , calibration gage blocks BS 2704
ASME Basic Ultrasonic Calibration Blocks for welds UT examination
AWS RC Ultrasonic Reference Blocks for checking angle beam transducer resolution
90° Curved 5 - Step NDT Calibration Blocks Pipe Thikness Test Block Calibration
Product Specification
| Payment Terms | L/C, T/T, Western Union,Paypal | Supply Ability | 100 sets per month |
| Delivery Time | 3-7 days | Packaging Details | in High quality carton |
| Product name | Penetrate testing test specimen | Model | YM-B3 |
| Testing standard | JB/T6064-2006、NB/T47013.5-2015 | Flaw width target value | 0.5µm |
| Brand Name | HUATEC | Model Number | YM-B3 |
| Certification | ISO，CE，Gost | Place of Origin | China |
| High Light | chrome plating ut test block ，penetrant ut test block ，chrome plating ut calibration blocks | ||
Chrome Plating Test Block Penetrant Testing Block Test Specimen YM-B3
A test block with the size of 130mm×40mm×4mm and the material of 0Cr18Ni9Ti or other stainless steel materials was chromium plated on one side, and three radial crack areas were formed by applying different loads on the back of the block by Brinell hardness method. The location numbers were 1, 2 and 3 in order of size. The position, spacing and other requirements shall be in accordance with the relevant provisions of Type B test blocks in JB/T 6064 -- 1992. The crack sizes correspond to crack location numbers 2, 3 and 4 on JB/T 6064 -- 1992 type B test blocks.
The chrome plating test block is mainly used to check the sensitivity of the penetrant detection agent system and the correctness of the operation process.
If it is found that the test block is blocked or the sensitivity is reduced, it must be repaired or replaced in time.
The test block should be thoroughly cleaned with acetone after use. After cleaning, the sample is stored in an airtight container containing a mixture of acetone and anhydrous alcohol (mixing ratio by volume: 1∶1) or by other effective methods.
|
Specification | All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. |
| Material: | Test Report according to ISO 10474-3.1.B,JIS G 0415-3.1.B |
| Depth | 100µm |
| Width (target value) | 0.5µm |
| Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled. | |
| Traceability | Calibration standards used are traceable to international standards |
All linear dimensions to the requirements of AS2083/2005, BS2704/1978/1983, where applicable. Heat treatment to the requirements of GB/T6394/2002. where practicable tolerances to (+/-0.1mm) unless otherwise stated. Treated to 920 degrees C for 30 minutes, water quenched, 650 degrees C for 3 hours, air cooled
Material standard:according to ISO 10474-3.1.B,JIS G 0415-3.1.B
Material: Stainless steel chrome plating
Flaw depth:100µm
Flaw width target value:0.5µm
Testing standard: JB/T6064-2006,NB/T47013.5-2015
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2007
Total Annual:
500000-1000000
Employee Number:
35~50
Ecer Certification：
Verified Supplier
HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified... HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified...
Get in touch with us
Leave a Message, we will call you back quickly!