HUATEC GROUP CORPORATION
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 50sets per year |
| Delivery Time | 2~3 months after payment |
| Packaging Details | in wooden box |
| Product name | Fluorescent Magnetic Particle Flaw Detector |
| Model | HMP-4000L |
| Circumferential magnetization current（A） | 4000A |
| Electrode spacing（mm） | 450 |
| Brand Name | HUATEC |
| Model Number | HMP-4000L |
| Certification | ISO,CE |
| Place of Origin | China |
View Detail Information
Explore similar products
Permanent Magnet Particle Flaw Detection Magnetic Particle Inspection Crack
Handy Magnetic Particle Testing Equipment
MPI Magnetic Particle Testing Equipment Magnetic Field Indicator
Steel Magnetic Particle Testing Equipment Standard Flaw Shims Artificial Flaw
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 50sets per year |
| Delivery Time | 2~3 months after payment | Packaging Details | in wooden box |
| Product name | Fluorescent Magnetic Particle Flaw Detector | Model | HMP-4000L |
| Circumferential magnetization current（A） | 4000A | Electrode spacing（mm） | 450 |
| Brand Name | HUATEC | Model Number | HMP-4000L |
| Certification | ISO,CE | Place of Origin | China |
| High Light | bench type fluorescent flaw detector ，magnetic particle testing equipment ，fluorescent magnetic particle detector | ||
Bench Type Fluorescent Magnetic Particle Flaw Detector
Magnetic particle inspection utilizes the interaction between the leakage magnetic field at the defect site of the workpiece and magnetic particles. It takes advantage of the difference in magnetic permeability between surface and near-surface defects (such as cracks, slag inclusions, hairline streaks, etc.) of steel products and the magnetic permeability of steel. After magnetization, the magnetic field at the discontinuous parts of these materials will be distorted, resulting in partial magnetic flux leakage and the generation of a leakage magnetic field. By taking advantage of the characteristic that the leakage magnetic field at the defect site can adsorb magnetic particles, This attracts magnetic powder to form a magnetic powder accumulation at the defect site - magnetic traces. Under appropriate lighting conditions, the location and shape of the defect are revealed
diameter＜φ400mm,length 200~500mm
Magnetic particle flaw detector:GB/T8290—2011
Observation conditions for magnetic particle testing:GB/T 5097-2020/ ISO 3059:2012
American Society for Testing and Materials: Magnetic particle testing Method ASTM E1444-01
EU, international standards:DIN EN ISO 9934-2-2003
| Technical Parameter Table | ||
| current name | AC | |
| Circumferential magnetization current(A) | 4000A | |
| Longitudinal magnetization flux potential(AT) | 18000 | |
| Inner diameter of the coil (mm) | 400 | |
| Rod threading journey(mm) | 0~500 | |
| Electrode spacing(mm) | 450 | |
| host | Split type (The electrical control cabinet is separated from the main unit | |
| Sensitivity | A type shim(15/50)Clear display | |
| Temporary load rate | ≤30% | |
| Control mode | Manual/semi-automatic | |
| Operation interface | Button/Touchscreen | |
| Clamping method | Pneumatic | |
| Alternating current magnetization method | Circumferential magnetization, longitudinal magnetization, and compound magnetization | |
| Exchange demagnetization methods | Automatic attenuation demagnetization | |
| UV lamp | Suspended type/handheld type | |
| Spray time | 3"～6" / Manual | |
| Magnetization time | 2"~4"/time | |
| Check the beat | 40"/piece | |
| Demagnetization time | 3"~5" | |
| Gas source | 0.4-0.8MPa | |
| Power supply | Three-phase five-wire,380V±10%,50Hz | |
1 set x fluorescent magnetic particle flaw detection line
2 set x magnetizing power supplies
1 set x magnetization mechanism
1 set x rotating observation table
2 set x of transplanting manipulators
1 set x darkroom
1 set x standard test pieces
1 set x magnetism meter
1 set x foot switch
1 set x suspended ultraviolet lamp
1 set x handheld ultraviolet lamp
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller
Year Established:
2007
Total Annual:
500000-1000000
Employee Number:
35~50
Ecer Certification：
Verified Supplier
HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified... HUATEC Group is a reliable manufacturer and supplier of testing instruments in Beijing China. HUATEC Group combines all the R/D and production advantage of all its own subsidiaries, takes advantage of its years marketing and sales experience in global market, contributes to offering most qualified...
Get in touch with us
Leave a Message, we will call you back quickly!